Operation Manual


Getting Started Connections Playback Remote ControlMulti-zone Information Troubleshooting Specifications
ENGLISH
Setting items Setting contents
Crossover Frequency
Outputs at below set
frequency, each speaker’s
bass signal output from
the subwoofer. Set this
according to the low
frequency reproduction
capabilities of the speakers
you are using.
40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz /
250Hz : Set the crossover frequency.
Advanced : Specify crossover frequency for each speaker.
Front / Center / Surround / Surround Back / Front Height : Select the
speaker.
40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz /150Hz / 200Hz /
250Hz : Set the crossover frequency.
Can be set when the “Speaker Configuration” – “Subwoofer” (vpage
33) setting is “Yes”, or when you have a speaker that is set to “Small”.
Always set the crossover frequency to “80 Hz”. When using small
speakers, however, we recommend setting the crossover frequency to
a higher frequency.
For speakers set to “Small”, sound below the crossover frequency is cut
from the sound output. The cut bass sound is output from the subwoofer
or front speakers.
The speakers that can be set when “Advanced” is selected differ
according to the “Subwoofer Mode” setting (vpage 34).
When “LFE” is selected, speakers set to “Small” at “Speaker
Configuration” can be set. If the speakers are set to “Large”, “Full
Band” is displayed and the setting cannot be made.
If set to “LFE+Main”, this setting can be made regardless of the
speaker size.
•
•
•
•
•
•
•
•
Front Speaker Setup
Set the front speakers to use
for every surround mode.
Setting : Choose the method for setting the front speakers.
Normal : The front speakers are set using the <FRONT SPEAKERS>.
Custom : The front speakers used for the different playing modes are
set in advance.
2CH DIRECT/STEREO : The front speakers used in the direct, stereo and
pure direct play modes (2 channel) are set in advance.
A : Front speaker A is used.
B : Front speaker B is used.
A+B : Both front speakers A and B are used.
MULTI CH : The front speakers used in modes other than the direct, ste-
reo and pure direct play modes (2 channel) are set in advance.
A : Front speaker A is used.
B : Front speaker B is used.
A+B : Both front speakers A and B are used.
NOTE
• When set to “Custom”, <FRONT SPEAKERS> does not operate.
• The front speaker setting stored for the “Quick Select” function is given
priority.
•
•
•
•
•
•
•
•
Making Detailed Settings (Manual Setup)
Setting items Setting contents
RGB Range
Set the video range of RGB
output from the HDMI
terminal.
Normal : Output with RGB video range (16 (black) to 235 (white)).
Enhanced : Output with RGB video range (0 (black) to 255 (white)).
This setting is valid when using a TV equipped with a DVI terminal.
Auto Lip Sync
Automatic compensation
for timing shift in audio and
video output.
ON : Compensated.
OFF : Not compensated.
Audio Out
Select HDMI audio output
device.
AMP : Playback through speakers connected to the receiver.
TV : Playback through TV connected to the receiver.
When the HDMI control function is operating, the setting of audio
playback in the connected TV takes priority (vpage 75 “HDMI
Control Function”).
HDMI Control
External devices can be con-
trolled from the AVR-3310
and the AVR-3310 can be
controlled from external de-
vices.
NOTE
The HDMI control function
controls operations of a
TV that is compatible with
the HDMI control function.
Make sure that the TV and
HDMI are connected when
you perform HDMI control.
ON : Use the HDMI control function.
OFF : Do not use the HDMI control function.
Please consult the operating instructions for each connected device to
check the settings.
For details on the HDMI control function, see “HDMI Control Function”
(vpage 75).
NOTE
• When “HDMI Control” is set to “ON”, it consumes more standby
power.
• When not using this unit for a long period, we recommend that you
press <POWER> to turn off (jOFF) the power.
• When the “HDMI Control” setting has been changed, always turn off
the power to the connecting devices afterwards and then turn back on.
• The “HDMI Control” does not work when the power to the equipment
is off.
• When “HDMI Control” is set to “ON”, power is supplied constantly to
the AC outlet (UNSWITCHED).
•
•
Standby Source
Set the HDMI connector for
HDMI signal input during
standby.
Last : Standby with last used input source during power on.
HDMI1 / HDMI2 / HDMI3 / HDMI4 / HDMI5 : The standby mode is set at
the input source assigned to the respective.
This can be set when “HDMI Control” is set to “ON”.
Make settings for HDMI video/audio output.
Making the HDMI Settings (HDMI Setup)
Default settings are underlined.
Main remote control
operation buttons
:Displaying the menu
Cancel the menu
:Moves the cursor
(Up/Down/Left/Right)
:Confirm the setting :Return to previous menu
See overleaf
Settings