Operation Manual
Getting Started Connections Settings Remote ControlMulti-zone Information Troubleshooting Specifications
ENGLISH
1
Playback preparation.
q Check the network environment, then turn on the AVR-
3310’s power (vpage 22 “Connecting to a Home
Network (LAN)”).
w If settings are required, make the “Network Connecting”
(vpage 37).
e Prepare the computer (vComputer’s operating
instructions).
r Set [DEVICE SELECT 1] to “MAIN/TV” [DEVICE SELECT 2]
to “MAIN”.
2
Press [SOURCE SELECT] to display the GUI Source
Select menu, then select “ ” (vpage 26).
3
Use ui to select the server including the le to be
played, then press ENTER or p.
4
Press ui to select the search item or folder, then
press ENTER or p.
5
Press
ui
to select the le, then press
ENTER, p
or [1]
.
Playback starts once buffering reaches “100%”.
6
Adjust the items below.
Adjusting the master volume (vpage 62)
Selecting the surround mode (vpage 64)
Adjusting the Sound and Picture Quality
(vpage 67)
n
n
n
Use this procedure to play music files, image files or playlists.
Playing Network Audio, USB Memory Devices
Playing Files Stored on a Computer
When playing still picture (JPEG) files, files can also be selected
using the operation described below.
During playback, either press [TU 6] (previous file) or [TU 7]
(next file).
Connections to the required system and specific settings must be
made in order to play music files (vpage 22).
Before starting, you must launch the computer’s server software
and set the files as server contents. For details, see the operating
instructions of your server software.
Depending on the size of the still picture (JPEG) file, some time may
be required for the file to be displayed.
The order in which the tracks/files are displayed depends on the
server specifications. If due to the server specifications the tracks/
files are not displayed in alphabetical order, searching by the first
letter may not work properly.
WMA Lossless files can be played when using a server supporting
transcoding, such as Windows Media Player Ver. 11.
Use the RESTORER mode to expand the low and high frequency
components of compressed audio files and achieve a richer sound
(vpage 71). The default setting is “Mode 3”.
The time (default : 30 sec) for which the GUI menus are displayed
can be set at “GUI” – “NET/USB” (vpage 41).
Use <STATUS> to switch between displaying the title name, artist
name or album name.
•
•
•
•
•
•
•
•
•
To stop (vpage 62)
Stopping playback temporarily (vpage 62)
Selecting tracks (vpage 63)
Playing repeatedly (vpage 63)
Playing in random order (vpage 63)
Searching pages (vpage 63)
Searching by first letter (vpage 63)
n
n
n
n
n
n
n
Button located on both the main unit
and the remote control unit
BUTTON
Button only on the main unit
<BUTTON>
Button only on the remote control unit
[BUTTON]
Symbols used to indicate buttons in this manual
Playback
ui p
<STATUS>
ENTER
[DEVICE
SELECT 1]
[DEVICE
SELECT 2]
[SOURCE
SELECT]
[NET/USB]
[1]
uip
ENTER
[TU 6]
[TU 7]
[NET/USB]
Front Rear
[USB]
Sub remote control unit