Graphical User Interface Use this manual in combination with the operating guide displayed on the GUI screen.
n SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
FCC INFORMATION (For US customers) n NOTE ON USE / OBSERVATIONS RELATIVES A L’UTILISATION 1. COMPLIANCE INFORMATION Product Name: AV Surround Receiver Model Number: AVR-3310CI This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation.
n Contents Getting Started Flow of Operations Through Playback·········································2 Cautions on Handling····································································2 Cautions on Installation································································2 Preparations···················································································3 Accessories···················································································3 Insert Batteries in the Remote Con
Connections Installing/Setting the Speakers (vpage 11) Speaker Connections (vpage 13) Connecting Devices (vpage 14) Turning the Power On (vpage 24) Specifications·······································································104 Settings Audyssey™ Auto Setup (vpage 28) List of preset codes···································End of this manual Manual Setup (vpage 33) • Power is supplied to some of the circuitry even when the unit is set to the standby mode.
Getting Started Connections Preparations Thank you for purchasing this DENON product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference. Accessories Check that the following parts are supplied with the product. Settings Playback Multi-zone Remote Control Information q Owner’s manual....................................................................... 1 w Getting started..........................
E6 E5 E4 E3 E2 E1 E0 W9 W8 W7 Getting Started Connections GWith the door openH Part Names and Functions W6 Front Panel For buttons not explained here, see the page indicated in parentheses ( ).
Getting Started Connections Part Names and Functions Display W1 Q9 Q8Q7 Q6 Q5 W0 Q4 Q3Q2 Q1 Q0 o i u Settings Playback q w Multi-zone q Input signal indicators w Input signal channel indicators Remote Control Information These light when digital signals are input. When playing HD Audio sources, the“ ” indicator lights when an extension channel (a channel other than the front, center, surround, surround back or LFE channel) is input.
Rear Panel Q5 Q6 Q4 Q3 Q2 Q0 Q0 Q1 Getting Started Connections Part Names and Functions Settings Playback Q8 Q7 Multi-zone Q7 Q6 Remote Control Information e r t u SIGNAL GND terminal································ (17) i AC inlet························································· (24) o AC OUTLETS················································ (24) Q0 Digital audio connectors····················· (16 ~ 19) Q1 HD Radio antenna terminals······················ (20) Q2 ETHERNET conn
Getting Started Connections Part Names and Functions Remote Control Unit Main Remote Control Unit (RC-1118) Rear Front Q1 q Settings w Playback r W3 e Q7 Multi-zone r Remote Control Information Q8 t Q2 Q9 W7 W0 Q3 y Q4 Troubleshooting Q5 o Q6 Q0 W8 W9 W1 u i W4 W5 W6 W2 E0 q Indicator······················································· (86) w Power buttons············································· (24) e QUICK SELECT buttons······························ (80) r Input sou
Sub Remote Control Unit (RC-1121) Q1 q Q2 Q3 Q4 Q6 Q7 y Q8 Q9 u (DIRECT PLAY) button································ (91) W0 W3 USB (DIRECT PLAY) button·················· (63, 91) Troubleshooting i Remote Control Information t Multi-zone Q5 r Playback e Settings w q ZONE indicators·········································· (92) w QUICK SELECT buttons························ (80, 86) e Input source select buttons························ (91) r SHIFT button·································
Getting Started Connections Important Information Connections Settings Connections for all compatible audio and video signal formats are described in this owner’s manual. Please select the types of connections suited for the equipment you are connecting. After connections are completed, certain settings must be made on the receiver. Make the settings indicated “ Set as Necessary ” for the individual items.
GFlow of video signals for ZONE2H Converting Input Video Signals for Output (Video Conversion Function) AVR-3310CI AVR-3310CI S-Video connector S-Video connector Video connector Video connector Output (MONITOR OUT) Input Monitor Video device Video connector Video connector Set as Necessary HDMI connector HDMI connector HDMI connector HDMI connector Component video connectors Component video connectors Component video connectors Component video connectors Resolutions of HDMI-compatible
Connections • The AVR-3310CI is compatible with various types of surround playback. • Decide on the surround modes to be played on the AVR-3310CI before making connections and settings. Settings a Determine the Speaker Layout n When 7.1ch (Front Height Speaker) Connected Front height speakers Front speakers Center speaker Subwoofer z2 z1 Playback Below we introduce examples of speaker layouts. Refer to these to arrange your speakers according to their type and how you want to use them.
s Set the “Amp Assign” Mode According to the Speaker Layout The signals output from the AVR-3310CI’s SURR. BACK/AMP ASSIGN speaker terminals can be switched (vpage 34 “Amp Assign”). SURR. BACK / AMP ASSIGN Speaker connections Amp assign mode (vpage 34) Example of speaker installation (Number of channels played) SURR. BACK / AMP ASSIGN Speaker connections Example of speaker installation (Number of channels played) MAIN ZONE ZONE2/3-MONO (7.1) L ch : ZONE2 speaker R ch : ZONE3 speaker (5.
Getting Started Speaker Connections Front speakers A Connections (L) Settings w Center speaker Surround speakers (L) (R) q w q w q Connecting the Speaker Cables w Subwoofer Subwoofer with built-in amplifier (R) qw Front speakers B q (L) w Carefully check the left (L) and right (R) channels and + (red) and – (black) polarities on the speakers being connected to the AVR-3310CI, and be sure to interconnect the channels and polarities correctly. off about 0.
Connecting Devices • Video Cassette Recorder (vpage 17) • Digital Video Recorder (vpage 18) n Connections to Other Devices • Video Camera / Game Console (vpage 21) • USB Port (vpage 21) • Component with Multi-channel Output connectors (vpage 21) • External Power Amplifier (vpage 22) • External Controller (vpage 22) n Connecting to a Home Network (LAN) (vpage 23) Digital video recorder Game console )%.* 065 )%.* 065 )%.* 065 )%.
Getting Started Connecting Devices NOTE Connections • If the GUI menu “Audio Out” setting (vpage 36) is set to “AMP”, the sound may be interrupted when the monitor’s power is turned off. • The audio signal from the HDMI output terminal (sampling frequency, number of channels, etc.) may be limited by the HDMI audio specifications of the connected device regarding permissible inputs.
Control Dock for iPod Connecting the Playback Components Blu-ray Disc Player / DVD Player Select the terminal to use and connect the device. For instructions on HDMI connections, see “Connecting Devices Equipped with HDMI Terminals” on page 14. Control dock for iPod 7*%&0 7*%&0 065 4 7*%&0 065 Settings Blu-ray Disc player / DVD player "6%*0 $0.
Getting Started Connecting Devices CD Player Record Player Select the terminal to use and connect the device. Connecting the Recording Components Turntable (MM cartridge) Connections CD player Select the terminal to use and connect the device. "6%*0 "6%*0 065 3 Settings L Playback L Video Cassette Recorder $0"9*"065 For instructions on HDMI connections, see “Connecting Devices Equipped with HDMI Terminals” on page 14.
Digital Video Recorder Connect the Tuner Select the terminal to use and connect the device. "6%*0 065 3 7*%&0 065 4 7*%&0 065 7*%&0 $0.10/&/5 7*%&0 065 : 1# 13 7*%&0 */ 4 7*%&0 */ "6%*0 "6%*0 */ 3 015*$"*/ - TV "6%*0 7*%&0 L R L R L R "6%*0 065 3 L R L R 015*$"065 Multi-zone R 4 7*%&0 065 Playback 7*%&0 065 L Settings 015*$" 065 7*%&0 Select the terminal to use and connect the device.
Getting Started Connecting Devices Satellite Receiver / Cable Tuner (Set Top Box) SIRIUS Connector Select the terminal to use and connect the device. • The AVR-3310CI is a SIRIUS Satellite Radio Ready® receiver. You can receive SIRIUS® Satellite Radio by connecting to the SiriusConnect Home Tuner and subscribing to the SIRIUS service. • Plug the SIRIUS connector on the rear panel. • Position the Home Tuner antenna near a south-facing window to receive the best signal.
HD Radio Terminals NOTE Keep the power cord unplugged until the SiriusConnect Home Tuner connection have been completed. Remove the vinyl tie and take out the connection line. HD Radio is a service that is only available within the United States. n Positioning the Antenna Bend in the reverse direction. a. With the antenna on top of any stable surface. Mount SKY q t w r EAST 1. Push the lever. Black 2. Insert the conductor. 3. Return the lever.
Getting Started Connecting Devices Connections to Other Devices Video Camera / Game Console USB Port Component with Multi-channel Output connectors When you connect a USB memory device to the USB port, you can enjoy music, etc., stored on the USB memory device. The video signal can be connected in the same way as a Blu-ray Disc player / DVD player (vpage 16 “Blu-ray Disc Player / DVD Player”). Connections USB memory device Select the terminal to use and connect the device.
External Controller External Power Amplifier • Select the terminal to use and connect the device. • Connect when using an external power amp or an amp you already have. "6%*0 46# 800'&3 '30/5 3 463306/% - 3 463306/% #"$, - 3 q Turn on the AVR-3310CI’s power. w Turn off the AVR-3310CI’s power from the external Infrared retransmitter "69 065 Input Infrared sensor Output Extension jack for future use. (Connect devices corresponding with room to room function to this jack.
Getting Started Connecting Devices Connecting to a Home Network (LAN) Connections When you connect the AVR-3310CI to a home network, you can enjoy listening to music files stored on your PC, internet radio audio and other sources. You can also control the AVR-3310CI from your PC via the Web browser.
Wait until all connections have been completed before connecting the power cord. BUTTON
Getting Started Settings GUI Menu Map Connections Pressing MENU displays the GUI menu. From this menu, you can move to various setting screens. Setting items Setting Playback Audio / Video Adjust Adjust various audio and video parameters. Information Show information about receiver settings, input signals, etc. Multi-zone Remote Control Information uto Setup A Makes the optimum speaker settings and corrects for the acoustic characteristics of the room.
Typical examples are described below. GExample 1H Menu selection screen (Top menu) The GUI menu is displayed on the TV screen. GExample 2H Audyssey Auto Setup screen (with illustration) z1 z6 b To return to the previous item, press o or RETURN. z7 Setting 1 uiop to select the menu to be set or 2 Press operated. Press MENU. Examples of GUI Menu Screen Displays Connections When a TV is connected to the AVR-3310CI, the GUI menu, sound field parameters, etc., can be displayed on the TV.
Getting Started GUI Menu Operation Selecting the Input Source Connections There are three ways to select the input source, as described below. q Selecting the input source using the Source Select menu (GUI menu) w Selecting the input source using the [INPUT SOURCE SELECT] (Main remote control unit) e Selecting the input source using the
n Audyssey Auto Setup Flow (vpage 29) n When using Front Height Speakers GExample qH FHL FL SW C FR GExample wH FHR FHL FL SW C FR FHR d Perform Audyssey Auto Setup (vpage 30) ( : Measuring positions) FL SW C FR ( : Measuring positions) SL SR SL SR *M *M SBL FL FR FHL FHR C SW SL SR SBL SBR SBR SBL SBR : Front speaker (L) : Front speaker (R) : Front height speaker (L) : Front height speaker (R) : Center speaker : Subwoofer : Surround speaker (L) : Surround speaker (R) : Surround
Getting Started Make the Optimal Speaker Settings, and Correct the Room Acoustics (Audyssey™ Auto Setup) NOTE Connections Setting Playback Multi-zone • Loud test sounds may be played during Audyssey MultEQ automatic speaker setup. This is part of normal operation. If there is background noise in room, these test signals will increase in volume. • Do not stand between the speakers and setup microphone or allow obstacles in the path while the measurements are being made.
s Audyssey Auto Setup Preparations around items indicate the default setting. ui to select “Auto Setup Start”, then press 1 Press ENTER. “Measure” 2 Select and then press ENTER. then press ENTER. press ENTER. : The surround back channel audio signals are output. ZONE2 : The ZONE2 audio signals are output. ZONE3 : The ZONE3 audio signals are output. ZONE2/3-MONO : The ZONE2 / ZONE3 monaural audio signals are output. :T he bi-amp audio signals are output.
Getting Started Make the Optimal Speaker Settings, and Correct the Room Acoustics (Audyssey™ Auto Setup) STEP3 Measurement the setup 5 Move microphone to ui to select 8 Use the item you want Connections the 2nd position, use ui to select “Measure”, then press ENTER. Setting Playback Multi-zone Perform Step 5 repeatedly for the 3rd, 4th, 5th, and 6th measurements. NOTE Speaker Config. Check Distance Check Channel Level Check Crossover Freq.
Error messages (examples) Error Messages • Not all speakers could be detected. • The front L speaker was not properly detected. Measures • Connect the included setup microphone to the SETUP MIC jack of the AVR-3310CI. • Check the speaker connections. Connections An error message is displayed if it was not possible to complete Audyssey Auto Setup due to speaker placement, the measurement environment, etc.
Getting Started Make the Optimal Speaker Settings, and Correct the Room Acoustics (Audyssey™ Auto Setup) Making Detailed Settings (Manual Setup) Check the Measuring Results and Equalizer Type after Audyssey Auto Setup (Parameter Check) For details on how to select, set and cancel settings for each menu, see “GUI Menu Operation” (vpage 26). This is displayed after Audyssey Auto Setup procedure is completed. Connections i to select “Parameter Check”, and then 1 Press press ENTER or p.
Making the Speaker Settings (Speaker Setup) Default settings are underlined. Setting items Speaker Configuration (Continued) Setting items Amp Assign Setting contents hen the “Amp Assign” setting (vpage 34) is other than “Front W Height”, you cannot make the “Front Height” setting. Subwoofer : Set the presence of a subwoofer. • Yes : Use a subwoofer. • No : Select when a subwoofer is not connected. hen “Front” is set to “Small”, “Subwoofer” can automatically set W to “Yes”.
Getting Started Making Detailed Settings (Manual Setup) Setting items Bass Setting Setting contents Connections Subwoofer Mode : Select low range signals to be reproduced by Settings for subwoofer and subwoofer. • LFE : The low range signal of the channel set to “Small” speaker size is LFE signal range playback. added to the LFE signal output from the subwoofer. • LFE+Main : The low range signal of all channels is added to the LFE signal output from the subwoofer.
Setting items Front Speaker Setup Setting contents Default settings are underlined. Make settings for HDMI video/audio output. Setting items RGB Range Setting contents :Displaying the menu Cancel the menu :Moves the cursor (Up/Down/Left/Right) Specifications Main remote control operation buttons ON : Switched. The power of the AVR- OFF : Not switched. 3310CI and external device turn off together. • This can be set when “HDMI Control” is set to “ON”.
Getting Started Making Detailed Settings (Manual Setup) Making the Audio Settings (Audio Setup) Default settings are underlined. Setting items 2ch Direct/Stereo Setting contents Connections Crossover : Outputs at below set frequency, each speaker’s bass signal output from the subwoofer. • 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz (Continued) Make settings for audio playback. Setting items EXT.
Setting items EQ Customize (Continued) Setting contents Audyssey Flat : Set when not using the “Audyssey Flat” equalizer. • Used : Use. • Not Used : Do not use.
Getting Started Making Detailed Settings (Manual Setup) Setting items Network Connecting (Continued) Setting contents Proxy settings : Make this setting when connecting to the Internet via a proxy server. Setting items Network Connecting Connections Setting w Set to “ON” when using the web control function. q Playback PC Language : Select computer environment language.
Setting items Other (Continued) Setting contents Network Information Display network information. Troubleshooting Specifications • When you press ENTER during display of the notification message, the “Check for Update” screen is displayed. (Refer to page 44 for more information on “Firmware Update”) • Press RETURN to erase the notification message. Upgrade Notification : Display a notification message on the AVR3310CI’s GUI screen when downloadable firmware is released with “Add New Feature”.
Getting Started Making Detailed Settings (Manual Setup) Making the Multi-zone Settings (Zone Setup) Default settings are underlined. Connections Set the audio to playback with multi-zone (ZONE2, ZONE3). Setting items Bass Setting contents –10dB ~ +10dB (0dB) Setting Adjust low frequency range (bass). Treble –10dB ~ +10dB (0dB) Playback Adjust high frequency range (treble). HPF Multi-zone Remote Control Information Troubleshooting OFF : The low range is not attenuated.
Setting items Source Delete Setting contents Setting items GUI (Continued) NOTE Make GUI related settings. hen the master volume display is hard to see when superimposed W on movie subtitles, set to “Top”. Tuner : Set the tuner screen display time when the input source is “SIRIUS” or “HD Radio”. • Always : Show display continuously. • 30s : Show display for 30 seconds after operation. • 10s : Show display for 10 seconds after operation. • OFF : Turn display off.
Getting Started Making Detailed Settings (Manual Setup) Setting items Zone Rename Setting contents Connections 1. Use ui to select the zone name (MAIN ZONE, ZONE2 or ZONE3) you Change the display title of want to change, then press p or ENTER. each zone to one you prefer. 2. Use o p to set the cursor to the character you want to change. 3. Use ui to change the character, then press ENTER. • Up to 10 characters can be input.
Setting items Firmware Update Notes concerning use of “Firmware Update” and “Add New Feature” Setting contents Display Upgrade : Execute the upgrade process. When updating starts, the power indicator becomes red and the GUI screen is shut down. The amount of update time which has elapsed is displayed. When updating is complete the power indicator becomes green and normal status is resumed.
Getting Started Making the Input Settings (Input Setup) For details on how to select, set and cancel settings for each menu, see “GUI Menu Operation” (vpage 26). Connections Settings Make the settings related to the currently selected input source. Before displaying the menu screen, press [SOURCE SELECT] to switch to the input source to be set. The items that can be set differ according to the selected input source. The set can be used without changing these settings. Make these settings as necessary.
n Input Assignments Menu Operations 1 Press MENU. ENTER, then use o p to select 4 Press the input terminal to be assigned. Use the ui to select “Input Setup”, the press ENTER or p. Setting contents TV SAT/CBL VCR DVR V.AUX input sources The DVD HDP Set this to change the HDMI are assigned to the HDMI input terminals as shown below. input terminals assigned to HDMI 1 / HDMI 2 / HDMI 3 / HDMI 4 / HDMI 5 the input sources. None : Do not assign an HDMI input terminal to the selected input source.
Getting Started Making the Input Settings (Input Setup) Setting items Digital (Continued) Setting contents b Upon purchase, the settings of the different input sources are as shown below. Connections Settings Playback Input source CD DVD HDP TV SAT/CBL VCR Default setting Coax 3 Coax 1 None Opt 1 Coax 2 None Input source DVR V.
Making the Video Settings (Video) Default settings are underlined. Setting contents SOURCE : Play the picture and sound of the input source. Change video input to your DVD / HDP / TV / SAT/CBL / VCR / DVR / V.AUX : Select video input source to view. This can be set for individual input sources. preferred input source. Resolution Video Convert Progressive Mode Select optimum progressive mode for video material. This can be set when the input source is DVD VCR DVR V.AUX .
Getting Started Making the Input Settings (Input Setup) Changing the Input Mode and Decoding Mode (Input Mode) Changing the Input Source’s Display Name (Rename) Default settings are underlined. Connections Setting contents Settings Auto : Automatically detect input signal and perform playback. Set the audio input modes for HDMI : Play only signals from HDMI input. the different input sources. Digital : Play only signals from digital input. Analog : Play only signals from analog input. EXT.
Setting the iPod with iPod Dock Playback Mode (Playback Mode) Making the Settings to Play Still Pictures (Still Picture) Default settings are underlined. This can be set for the input source for which “iPod dock” is assigned at “Input Assign” (vpage 47). This can be set when the input source is NET/USB . Setting contents Setting items Rhapsody . Automatically Presetting Radio Stations (Auto Preset) Setting items Setting contents Start Start the process.
Getting Started Making the Input Settings (Input Setup) Setting SIRIUS Radio Reception Restrictions (Parental Lock) Giving Names to Preset Stations (Preset Name) Connections Setting items A1 ~ G8 Default settings are underlined. Setting contents Select the preset channel. This can be set when the input source is HD Radio . Settings 1. Press p or ENTER. 2. Use o p to set the cursor to the character you want to change. 3. Use ui to change the character, then press ENTER.
Symbols used to indicate buttons in this manual BUTTON
Getting Started Playing Components Symbols used to indicate buttons in this manual Connections Button located on both the main unit and the remote control unit Button only on the main unit Button only on the remote control unit Settings ENTER BUTTON
Viewing Videos on an iPod® in the Browse Mode “Remote iPod” is displayed on the AVR-3310CI’s display. “TV Out” at the iPod’s “Slide show Settings” or “Video Settings” must be set to “On” in order to display the iPod’s photo data or videos on the monitor. For details, see the iPod’s operating instructions. To subscribe to XM, U.S. customers should visit xmradio.com or call 1-800-XMRADIO (1-800-967-2346); Canadian customers should visit xmradio.ca or call XM Listener Care at 1-877-GETXMSR (1-877-4389677).
Getting Started Tuning in Radio Stations – SIRIUS Satellite Radio Symbols used to indicate buttons in this manual Connections Button located on both the main unit and the remote control unit Button only on the main unit Button only on the remote control unit Settings
Presetting Radio Channels (Preset Memory) Your favorite broadcast channels can be preset so that you can tune them in easily. Up to 56 channels can be preset. Searching Categories 1 Press o p. Listening to Preset Channels Press [CHANNEL] to select the desired preset channel, then press ENTER. 1 2 Press ENTER for at least 3 seconds. 3 Enter the 4-digit lock code using uio p. “Enter Lock Code” is displayed. When you enter the correct code, the corresponding channel is locked. 4 Press ENTER.
Getting Started Tuning in Radio Stations – HD Radio Symbols used to indicate buttons in this manual Connections Button located on both the main unit and the remote control unit Button only on the main unit Button only on the remote control unit Settings
Check the HD Radio Reception Information 1 Press [SHIFT] to select the memory block (A to G). [CHANNEL] to select the desired preset 2 Press station. Press while an HD Radio broadcast is being received. • Internet radio refers to radio broadcasts distributed over the Internet. Internet radio stations from around the world can be tuned in. The AVR-3310CI is equipped with the following Internet radio functions: • Stations can be selected by genre and region.
Getting Started Playing Network Audio, USB Memory Devices Media Player Connections This function lets you play music files and playlists (m3u, wpl) stored on a computer (media server) connected to the AVR-3310CI via a network. With the AVR-3310CI’s network audio playback function, connection to the server is possible using one of the technologies below.
Symbols used to indicate buttons in this manual 1 q Check the network environment, then turn on the AVR3310CI’s power (vpage 23 “Connecting to a Home Network (LAN)”). w If settings are required, make the “Network Connecting” (vpage 38). e Set [DEVICE SELECT 1] to “MAIN/TV” [DEVICE SELECT 2] to “MAIN”. The station list is displayed. Playback starts once buffering reaches “100%”. Front [NET/USB] [1] Rear 5 Adjust the items below.
Getting Started Playing Network Audio, USB Memory Devices Symbols used to indicate buttons in this manual Connections Button located on both the main unit and the remote control unit Button only on the main unit Button only on the remote control unit Settings uio p ENTER BUTTON
Playing Files Stored on a Computer Use this procedure to play music files, image files or playlists. Use ui to select the server including the file to be played, then press ENTER or p. Press ui to select the file, then press ENTER, p or [1]. Playback starts once buffering reaches “100%”. Adjust the items below.
Getting Started Playing Network Audio, USB Memory Devices, Listening to Napster Symbols used to indicate buttons in this manual Connections Button located on both the main unit and the remote control unit Button only on the main unit Button only on the remote control unit Settings uio p ENTER BUTTON
Enter a Character Search For the Track You Want to Listen to [1/7] Napster p while the track you wish to register is 1 Press playing. 2 Select “Add to my library”, then press ENTER or p. Connections 1 Press [SEARCH]. Registering Tracks in My Napster Library The track is entered in the Library. Napster Playlists Staff Picks Genres The search display appears. After selecting, the information is displayed. Multi-zone ui to select the search item, then press 2 Use ENTER.
Getting Started Listening to Rhapsody Symbols used to indicate buttons in this manual Connections Button located on both the main unit and the remote control unit Button only on the main unit Button only on the remote control unit Settings ENTER BUTTON
Select the Search Mode e Search From the Rhapsody Internet Radio Station [1/4] Rhapsody Search Rhapsody Channels My Library r e w Press p during playback to display the Track Menu. Jamp to artist Jamp to album Similar artist Similar albums The search display appears. b You can search by artist name, album name, track name or keyword. Use ui to select “Add to My Library”, then press ENTER or p. The track is entered in the Library.
Getting Started Symbols used to indicate buttons in this manual Connections Button located on both the main unit and the remote control unit Button only on the main unit Button only on the remote control unit ENTER BUTTON
To Cue to the Beginning of a Track Press [RANDOM]. ON : Enable random playback. OFF : Disable random playback. Connections During playback, either press [8] (to search for previous tracks) or [9] (to search for subsequent tracks), or press ui. Playing in Random Order b GUI menu “Random” (vpage 50) can be set in the same way. : Repeat all songs. One : Repeat the current song. OFF : Disable repeat playback. Selecting Tracks During playback, either press u (previous track) or i (next track).
Getting Started Selecting the Surround Mode (Surround Mode) Symbols used to indicate buttons in this manual Connections Button located on both the main unit and the remote control unit Button only on the main unit Button only on the remote control unit BUTTON
w Playing in a DENON Original Surround Mode pressing DSP : This mode is for enjoying the atmosphere of a live concert in an arena. JAZZ CLUB : This mode is for enjoying the atmosphere of a live concert in a jazz club. VIDEO GAME : This mode is suited for achieving surround sound with video games. MATRIX : This mode lets you add a sense of expansion to stereo music sources.
Getting Started Adjusting the Sound and Picture Quality (Audio/Video Adjust) For details on how to select, set and cancel settings for each menu, see “GUI Menu Operation” (vpage 26). Setting items Adjusting the Sound (Audio Adjust) Connections Default settings are underlined. Surround Parameters (Continued) Settings The sound being played in the surround mode can be adjusted to your liking.
Setting items Surround Parameters (Continued) Setting contents Setting items Surround Parameters Front Height : Set the front height channel. • ON : Use the front height channel. • OFF : Do not use the front height channel. (Continued) This can be set when “Tone Control” (vpage 72) is set to “ON”.
Getting Started Adjusting the Sound and Picture Quality (Audio/Video Adjust) Setting items Audyssey Settings Set MultEQ, Dynamic EQ and Dynamic Volume. Connections NOTE Setting contents Settings MultEQ : Corrects both time and frequency response problems in the listening area. • Audyssey : Optimize the frequency response of all speakers. • Audyssey Byp.L/R : Optimize frequency response of speakers except front L and R speakers.
Setting items Audyssey Settings (Continued) Setting contents ” is displayed when set to “ON”. Use the graphic equalizer q Select the speaker tone adjustment method. to adjust the tone of each All : Adjust the tone of all speakers together. speaker. L/R : Adjust the tone of left and right speakers together. Each : Adjust the tone of each speaker. w Select the speaker. e Select the adjustment frequency band.
Getting Started Adjusting the Sound and Picture Quality (Audio/Video Adjust) Setting items RESTORER (Continued) Connections Settings Playback Audio Delay Setting contents Adjusting the Picture Quality (Picture Adjust) About the RESTORER function • Such compressed audio formats as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear.
Setting items Setting items Setting contents Setting contents Shows information preset channels. This can be checked when the input source is set to NET/USB HD Radio . SIRIUS Playback Preset Channel about A / B / C / D / E / F / G • A1 ~ A8 / B1 ~ B8 / C1 ~ C8 / D1 ~ D8 / E1 ~ E8 / F1 ~ F8 / G1 ~ G8 Multi-zone Remote Control Information Dialogue normalization function This is automatically activated when playing Dolby Digital sources.
Getting Started Other Operations and Convenient Functions Symbols used to indicate buttons in this manual Connections Button located on both the main unit and the remote control unit Button only on the main unit Button only on the remote control unit Settings
HDMI Control Function When you set “Output audio from amp” in the TV audio output setup operation, you can switch the amp power on. n You can switch AVR-3310CI input source through linkage to TV input switching. ok. you turn the TV’s power to standby, check 5 When that the power of the AVR-3310CI and player also Remote Control Information n When playing the player, the AVR-3310CI input function switches to the function of that player.
Getting Started Convenient Functions Symbols used to indicate buttons in this manual Connections Button located on both the main unit and the remote control unit Button only on the main unit Button only on the remote control unit BUTTON
Saving Frequently Used Settings (Quick Select Function) Saving the Settings Starting the Party Mode as the Organizer “Enter Party Mode?” is displayed. b An error message is displayed when you are not connected to a network. The current settings will be memorized. Volume –40dB –40dB –40dB Calling the Settings Out The “ ”, “ ” or “ ” indicator lights on the display. The “ ” indicator on the display lights.
Getting Started Convenient Functions Operating a Wireless LAN-Compatible Mobile Terminal to Play Music and Videos Playing Contents on a Mobile Terminal Device Wireless LANcompatible router AVR-3310CI Connections • Perform this procedure using a wireless LAN-compatible mobile terminal conforming to the DLNA (Digital Living Network Alliance) standard.
Operating the AVR-3310CI with a Browser (Web Control Function) the top menu is displayed, click on the menu 4 When 5 Operate. you want to operate. GExample 1H Main zone control screen You can operate the AVR-3310CI using a browser. Connections z2 z6 Settings “ON” the “Network Standby” setting 1 Switch (vpage 39). the AVR-3310CI’s IP address with “Network 2 Check Information” (vpage 40). z3 Playback z5 z7 z4 For example, if the IP address of AVR-3310CI is “192.168.100.33”, enter “http://192.168.
Getting Started Convenient Functions GExample 2H Setup menu screen z10 GExample 4H PDA menu screen GExample 6H Dedicated iPod Touch screen b When accessed from the iPod Touch browser, an optimized operation screen is displayed. z12 Connections z13 z18 z18: Select to operate each zone. Settings z11 NOTE You cannot change setup menu operations and zone name on the PDA menu screen.
This function allows you to play sound in rooms other than the main zone where multi-channel sound is played. Video Connection Audio Connections (ZONE2, ZONE3) The audio signals of the AVR-3310CI’s ZONE2 and ZONE3 audio output terminals are output to the ZONE2 and ZONE3 amplifiers and played on these amplifiers.
Getting Started Symbols used to indicate buttons in this manual Connections Button located on both the main unit and the remote control unit Button only on the main unit Button only on the remote control unit BUTTON
It is also possible to save three settings for multi-zone. q Input Source (vpage 85) w Volume Level (vpage 85) 2 [ZONE OFF] The current settings will be memorized. [MAIN ON] 1 Switch [DEVIDE SELECT 1]. MAIN/TV DEVICE [0 ~ 9] : To register a TV : To operate a Blu-ray disc player, DVD player, Digital video recorder, video deck, satellite receiver, cable TV or CD player [DEVIDE SELECT 2] to the component to be 2 Set registered.
Getting Started Operating the Main Remote Control Unit Operating Components Connections 1 iPod Switch [DEVIDE SELECT 1].
SIRIUS (SAT TU) NET/USB Front Front DEVICE SELECT Channel selection SEARCH Rear TUNING df RETURN Front 6 7 CH + – TV INPUT VOLUME df Front MUTE MENU uio p ENTER SETUP RETURN Power on / Standby Playz Pausez Stopz Manual search z (fast-reverse / fast-forward) Switch channels (+, –)z Switching the input d : TV Volume (+) f : TV Volume (–) TV mute Calling out the menus Cursor operation Enter setting Setup Return Remote Control Information Front ON/SOURCE 1 3 2 Play/Pause Stop Preset channel selec
Getting Started Operating the Main Remote Control Unit Blu-ray disc Player / DVD Player Digital Video Recorder (DVR) / Video Deck (VCR) Front Front Connections DEVICE SELECT Settings POWER OFF ON/SOURCE 1 2 3 Playback SKIP + Multi-zone 6 7 Remote Control Information Front 8 9 MENU uio p ENTER SETUP RETURN SOURCE SELECT / TOP MENU Satellite receiver/Cable TV Front DEVICE SELECT Power off Power on or Power on / Standby Play Stop Pause BD Player DVD Player – ON/SOURCE 1 2 3 6 7 CH + – MENU ui
CD Player Assigning buttons that are Not Used to Operate Other Devices (Punch Through Function) Front Rear Front Number input / Track selection Default setting (Preset code) DENON (111) Special Remarks q [3] [6], [7] [8], [9] TV SAT/CBL : Assigning TV buttons to operate other devices : Assigning satellite receiver or cable TV buttons to operate other devices [BAND] and [DYNAMIC VOLUME] at the same 3 Press time. Rear The indicator starts flashing.
Getting Started Operating the Sub Remote Control Unit Connections Settings Playback • The sub remote control unit is equipped with frequently used buttons, so it can be used for simple remote control unit operations. • The sub remote control unit can also be used for multi-zone, so you can use it to control the AVR-3310CI from other rooms. • The operations listed below can be performed with the sub remote control unit.
Switching Zones Use this procedure to select the zone to be operated by the sub remote control unit. Setting the Zone for Which the Sub Remote Control Unit is Used (ZONE SELECT LOCK Mode) The currently selected multi-zone indicator lights. We recommend always using the sub remote control unit for the same room. When this is done, the unit can be set so that the zone does not switch when buttons are operated.
Getting Started Other Information Explanation of Terms Connections The AVR-3310CI is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater. Settings Dolby Digital Dolby Pro Logic gx Dolby Pro Logic gx is a further improved version of the Dolby Pro Logic g matrix decoding technology. Audio signals recorded in 2-channels are decoded to achieve a natural sound with up to 7.1-channels.
DTS 96/24 DTS Express is an audio format supporting low bit rates (max. 5.1channels, 24 to 256 kbps). Audyssey MultEQ® Windows Media Player Ver.11 Audyssey MultEQ is a room equalization solution that calibrates any audio system so that it can achieve optimum performance for every listener in a large listening area.
Getting Started Surround Surround Modes and Parameters Signals and adjustability in the different modes Connections Surround Mode Channel output Front L/R Center Surround L/R Parameter (default values are shown in parentheses) Surround Back L/R Subwoofer Front Height L/R D. COMP DRC z1 LFE z2 AFDM z3 z1 Surround Back Cinema EQ.
Signals and adjustability in the different modes Parameter (default values are shown in parentheses) Surround Mode EXT. IN only Center Width Center Image Subwoofer Att.
Getting Started Surround Differences in Surround Mode Names Depending on the Input Signals Input signals Button DTS-HD DTS Connections ANALOG LINEAR PCM / WAV WMA (Windows Media Audio) / MP3 / MPEG-4 AAC / FLAC DTS-HD Master Audio A A A F A A A DTS-HD HI RES A A A A F A A Surround Mode Note DTS-HD High DTS Resolution EXPRESS Audio DOLBY DTS ES DTS ES DSCRT MTRX (With Flag) (With Flag) DOLBY DIGITAL DOLBY DOLBY DIGITAL TrueHD Plus DOLBY DIGITAL EX (With Flag) DOLBY DOLBY DIGI
Input signals Button DTS-HD Surround Mode Note ANALOG DTS-HD High Resolution Audio DTS EXPRESS DOLBY DTS ES DTS ES DSCRT MTRX (With Flag) (With Flag) DTS (5.1ch) DTS 96/24 DOLBY TrueHD DOLBY DIGITAL DOLBY DOLBY DOLBY DOLBY DIGITAL EX DIGITAL DIGITAL EX DIGITAL (With no Plus (With Flag) (5.
Getting Started Relationship Between Video Signals and Monitor Output Video Convert HDMI Connections Settings Playback Multi-zone A ON ON ON ON ON ON ON ON z1 ON ON ON ON z1 ON ON ON ON z1 ON ON ON A A A A A A A A A A A A A A A A A A S S S S S S S S A A A A A A A S S S S S S S S ON ON ON Remote Control Information ON ON ON ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF Troubleshooting Specifications ON/OFF Input Signals COMPONENT S-VIDEO A S S S S S S S S S S S S S S S A A A (1
Symptom Cause / Countermeasure Page 103 Power does not turn on, or turns off directly after it was turned on. • Check that the power plugs are securely inserted into the AVR3310CI’s AC inlet and the wall power outlet. 24 “DOLBY DIGITAL” indicator does not appear on display. • Set the dimmer function to a setting other than “OFF”. • Cancel the PURE DIRECT mode. The display turns off when in the Pure Direct mode. 43 70 • Check the Blu-ray Disc player / DVD player’s audio output setting.
Getting Started GAudioH GVideoH Symptom Cause / Countermeasure No sound is produced • When playing monaural audio sources, select a surround mode from center speaker. other than “STANDARD” (Dolby/DTS Surround). Connections No sound is produced • Set the surround mode to a mode for surround playback. from surround speakers. Settings Playback No sound is produced • Check that the surround back speaker’s power amplifier from surround back assignment is set to “Normal”. speaker.
Page 21 – – – 59 23 58, 59 – 40 58, 59 59 40 – – – 40 102 Specifications – – Troubleshooting 60, 61 – Remote Control Information – – Multi-zone 58, 59 – Playback – – – 40 – Settings – Page – Connections Symptom Cause / Countermeasure When a USB memory • The set cannot recognize a USB memory device. Check the device is connected, connection. “USB” is not • A USB memory device not conforming to mass storage class or displayed on the GUI MTP standards is connected.
Getting Started GSIRIUS Satellite RadioH Connections Settings Symptom “CHECK SIRIUS TUNER” is displayed. ”ANTENNA ERROR” is displayed. ”NO SIGNAL” is displayed. ”INVALID CHANNEL” is displayed. ”ACQUIRING SIGNAL” is displayed. Playback Multi-zone ”Call SIRIUS”z is displayed. ”SUBSCRIPTION UPDATED” is displayed. ”Enter Lock Code [ ]” is displayed. Cause / Countermeasure • The SiriusConnect Home Tuner unit is not connected. Check that the connections are correct. • The antenna is not connected.
Receiving Range: Usable Sensitivity: S/N (IHF-A): Total harmonic Distortion (at 1 kHz): [FM] (note: µV at 75 Ω/ohms, 0 dBf = 1 x 10-15 W) 87.5 MHz ~ 107.9 MHz 1.5 µV (14.8 dBf) MONO 78 dB STEREO 68 dB HD 85 dB MONO 0.1 % STEREO 0.2 % HD 0.02 % [AM] 530 kHz ~ 1710 kHz 20 µV 85 dB Settings n HD Radio section • Power amplifier Front: Rated output: 130 W + 130 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.) 170 W + 170 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.
List of preset codes / Liste de codes préréglés Contec Contec/Cony Craig Crosley Crown CTX DEVICE SELECT : TV Television A B C 3M Addison Admiral Advent Adventura Aiko Akai Albatron Alleron America Action Ampro Amtron Anam Anam National AOC Apex Apex Digital Audiovox Aventura Axion Bang & Olufsen Barco Baur Belcor Bell & Howell Benq Blue Sky Bradford Brillian Brockwood Broksonic byd:sign Candle Carnivale Carver CCE Celebrity Celera Changhong Ching Tai Chun Yun Chung Hsin Citizen Clarion Coby 100 163
Telefunken TMK Toshiba U V W Y Z Totevision Trutech Tuntex TVS US Logic Vector Research Vidikron Vidtech Viewsonic Viking Viore Vizio Wards Westinghouse White Westinghouse Yamaha Yapshe Zenith 019 012 003, 004, 005, 006, 030, 051, 156, 177 153 091 158, 163 050, 141 090 137, 151 155 012, 030, 036 061, 076, 142 041 115 061, 093, 094, 095, 126, 144 010, 012, 030, 033, 036, 039, 137, 151, 155 061, 065, 140 T W RCA Sylvania F M P T G C D G H I L M O P R S Akai Apex Axion Coby Cytron DiamondVision Dis
I J L M N P R S T iBUYPOWER JVC Linksys Media Center PC Microsoft Mind Niveus Media Northgate Panasonic Philips Proscan RCA ReplayTV Samsung Sonic Blue Sony Stack Systemax Tagar Systems Tivo U V Z Toshiba Touch UltimateTV Viewsonic Voodoo ZT Group 035 063, 076 035 035 035 035 035 035 070 063, 065, 066, 067, 068, 072 077 063, 065, 072, 077 069 065, 067, 072 069 035, 064, 074, 078 035 035 035 063, 064, 065, 068, 073, 074, 078 035, 075 035 077 035 035 035 D E F G H Video Cassette Recorder A B C A
Philips R Pioneer Primestar Proscan Proton RadioShack RCA S T U V Z Realistic Samsung Sharp Sony Star Choice STS Tivax Tivo Toshiba UltimateTV Uniden US Digital Viewsat Voom Zenith 100 073 111 107 060, 067, 068, 070, 072, 073, 090 060 082 056, 057 118 117 056, 057, 058, 070, 076, 086, 087, 088, 089, 092 080 060, 062, 069, 070, 071, 094 098 059, 066, 116 117 085 109 060, 070 063 116 073, 081 118 101 117 064, 096 F G H J Jerrold L M B C D E ABC Adelphia Americast Antronix Archer AT&T Bell South C
www.denon.com Denon Brand Company, D&M Holdings Inc.