Operation Manual

0
Getting Started Connections Settings Playback Remote ControlMulti-zone Information Specifications
Symptom Cause / Countermeasure Page
“CHECK SIRIUS
TUNER” is displayed.
• The SiriusConnect Home Tuner unit is not connected. Check that
the connections are correct.
19
”ANTENNA ERROR”
is displayed.
• The antenna is not connected. Check that the connections are
correct.
19
”NO SIGNAL” is
displayed.
• The signal cannot be received. Reposition the antenna. –
”INVALID CHANNEL”
is displayed.
• Channel is not present. Select another channel. –
”ACQUIRING
SIGNAL” is displayed.
• The signal cannot be received. Reposition your SiriusConnect
Home Tuner and Home Dock antenna.
• Displays while SiriusConnect Home Tuner is connected. Reposition
your SiriusConnect Home Tuner and Home Dock antenna.
–
–
”Call SIRIUS”
z
is
displayed.
• Channels are not subscribed to. If you subscribe to the channel,
you can receive the channel.
–
”SUBSCRIPTION
UPDATED” is
displayed.
• While updating contract information. –
”Enter Lock Code
[ ]” is displayed.
• Selected channels are locked. Please insert pass word (4 digits)
into “[ ]”.
–
z: After scroll displays “Call 888-539-
....
” twice, displays “Call SIRIUS”.
GSIRIUS Satellite RadioH
Restoring All the Settings to as They were at the
Time of Purchase (Resetting the Microprocessor)
Perform this procedure if the display is abnormal or if operations cannot be performed.
When the microprocessor is reset, all the settings are reset to their default values.
1
Turn off the power using <POWER>.
2
Press <POWER> while simultaneously pressing <STANDARD> and <DSP
SIMULATION>.
3
Once the display starts ashing at intervals of about 1 second, release the two
buttons.
If in step 3 the display does not flash at intervals of about 1 second, start over from step 1.
Troubleshooting