Operation Manual


Getting Started Connections Playback Remote ControlMulti-zone Information Troubleshooting Specifications
GUI Menu Operation
Use the device selection buttons on the main remote control unit to set the device to be operated
beforehand.
When using with an iPod connected directly to the AVR-3310CI’s USB pot, select “USB” for the input
source.
Input sources that are not going to be used can be set ahead of time. Make this setting at “Source
Delete” (vpage 42).
To turn off the source selection menu without selecting an input source, press [SOURCE SELECT]
again.
•
•
•
•
1
Set [DEVICE SELECT 1] to “MAIN/TV” and
[DEVICE SELECT 2] to “MAIN”.
2
Press [SOURCE SELECT].
Display the “Source Select” menu.
q Input Source : The name of the highlighted input source is displayed.
w Recently used sources : The recently used input sources (up to 5) are displayed.
e Icons for the input sources in the different categories are displayed.
Video :
Player :
Tuner :
Network :
(SAT/CBL), (TV), (VCR), (DVR), (V.AUX)
(HDP), (DVD), (CD), (PHONO)
(HD Radio), (SIRIUS)
(Favorites), (Internet Radio), (Media Server), (USB), (Napster),
(Rhapsody)
3
Use uio p to select the input source icon, then press ENTER.
The input source is set and the source selection menu is turned off.
The currently selected input source
is highlighted.
“ ” is displayed when using
a control dock for iPod.
Selecting the Input Source
There are three ways to select the input source, as described below.
q Selecting the input source using the Source Select menu (GUI menu)
w Selecting the input source using the [INPUT SOURCE SELECT] (Main remote control unit)
e Selecting the input source using the <SOURCE SELECT> (Main unit)
q Using the Input Setup Menu
The input source can also be selected using the source selection menu.
q
w
e
w Operating on the Main Remote Control Unit
1
Set [DEVICE SELECT 1] to “MAIN/TV” and [DEVICE
SELECT 2] to “MAIN”.
2
Press [INPUT SOURCE SELECT].
The desired input source can be
selected directly.
Turn <SOURCE SELECT>.
b If “ZONE2/3/ Rec Select”, “Video Select” or “Tuning Preset”
mode is selected for the input source, press <SOURCE>
before turning the <SOURCE SELECT>.
e Operating on the Main Unit
Setting
Front
Front
Front
Front Rear