Operation Manual
Getting Started Connections Settings Remote ControlMulti-zone Information Troubleshooting Specifications
Playing Components
4
Press [SEARCH] and hold it down for a 2 seconds or
more to select the display mode.
There are two modes for display the contents recorded on the
iPod.
Browse mode
:
This is the mode for displaying the iPod information on the GUI
screen to operate the iPod. In this mode, you cannot perform
operations directly on the iPod itself.
z With the AVR-3310CI’s display, only English letters and
numbers and certain symbols can be displayed. Any characters
that cannot be displayed are replaced with “. (period)”.
Remote mode
:
This is the mode for performing operations directly on the iPod
itself while watching the screen displayed on the iPod. In this
mode, the GUI screen is not displayed.
z “Remote iPod” appears on the main unit’s display.
Display mode
Browse mode
Remote mode
Playable
files
Audio file
S S
Picture file
A
S
z2
Video file
S
z1
S
z2
Active
buttons
Remote
control unit
(AVR-3310CI)
S S
iPod
®
A S
z1 : When using an ASD-11R DENON control dock for iPod.
z2 : Video may not be output, depending on the combination of
ASD-1R or ASD-11R DENON control dock for iPod and iPod.
b
�
5
Use ui to select the item, then press ENTER or p
to select the le to be played.
6
Press [1], ENTER or p.
Playback starts.
7
Adjust the items below.
Adjusting the master volume (vpage 67)
Selecting the surround mode (vpage 69)
Adjusting the Sound and Picture Quality
(vpage 71)
n
n
n
Use the RESTORER mode to expand the low and high frequency
components of compressed audio files and achieve a richer sound
(vpage 74). The default setting is “Mode 3”.
The title name, artist name and album name can be checked by
pressing <STATUS> during playback.
The time (default : 30 sec) for which the GUI menus are displayed
can be set at “GUI” – “iPod” (vpage 42). Press uio p to
return to the original screen.
Press [OFF] or <ON/STANDBY> and set the AVR-3310CI’s power to
the standby mode before disconnecting the iPod. Also switch the
input source to one to which the menu “iPod” is not assigned before
disconnecting the iPod.
•
•
•
•
NOTE
Depending on the type of iPod and the software version, some
functions may not operate.
DENON will accept no responsibility whatsoever for any loss of iPod
data.
•
•
To stop (vpage 67)
Stopping playback temporarily (vpage 67)
Fast-forwarding or fast-reversing (vpage 67)
To cue to the beginning of a track (vpage 68)
Playing repeatedly (vpage 68)
Shuffling playback (vpage 68)
Searching pages (vpage 68)
n
n
n
n
n
n
n
uio p
<STATUS>
ENTER
<ON/STANDBY>
[SEARCH]
[OFF]
[1]
uio p
ENTER
[iPod]
Button located on both the main unit
and the remote control unit
BUTTON
Button only on the main unit
<BUTTON>
Button only on the remote control unit
[BUTTON]
Symbols used to indicate buttons in this manual
Playback
[iPod]
Front Rear