Operation Manual


Getting Started Connections Settings Playback Remote ControlMulti-zone Information Troubleshooting Specifications
Tuning in Radio Stations – HD Radio
Playback
If the desired station cannot be tuned in with auto tuning, tune it in
manually.
When tuning in stations manually, press and hold [TUNING] to
change frequencies continuously.
The time (default : 30 sec) for which the GUI menu is displayed can
be set “GUI” – “Tuner” (vpage 42). Press uio p to return to
the original screen.
•
•
•
Selecting Audio Programs
HD Radio includes up to 9 audio programs (HD1 to HD8 and Analog).
The different audio programs also have data programs.
Press ui to select the audio program.
If the station you are listening to has multiple audio programs, “HD1”
is indicated on the display. If it only has one audio program, “HD”
is indicated.
Presetting Radio Stations (Preset Memory)
Your favorite broadcast stations can be preset so that you can tune
them in easily. Up to 56 stations can be preset.
1
Tune in the broadcast station you want to preset.
2
Press [MEMORY].
3
Press [SHIFT] to select the block in which the channel
is to be preset, then press [CHANNEL] to select the
preset number.
4
Press [MEMORY] again to complete the setting.
To preset other stations, repeat steps 1 to 4.
Multicasts can also be preset.
Stations can be preset automatically at “Auto Preset” (vpage
50).
•
•
•
NOTE
Preset stations are erased by overwriting them.
Listening to HD Radio Stations
1
Set [DEVICE SELECT 1] to “MAIN/TV” and [DEVICE
SELECT 2] to “MAIN”.
2
Press [SOURCE SELECT] to display the GUI Source
Select menu, then select “ ” (vpage 27).
3
Press [BAND] to select “FM” or “AM”.
4
Tune in the desired broadcast station.
q To tune in automatically (Auto Tuning)
Press [MODE] to select “HD-AUTO” or “AUTO”, then use
[TUNING] to select the station you want to hear.
The “ ” indicator lights on the display when an HD Radio
station is tuned in.
When “HD-AUTO” (tuning mode) is selected, only HD Radio
stations are tuned in.
If “AUTO” (tuning mode) is selected, both HD Radio and analog
stations are tuned in.
w To tune in manually (Manual Tuning)
Press [MODE] to select “MANUAL”, then use [TUNING].
•
•
•
5
Adjust the items below.
Adjusting the master volume (vpage 67)
Selecting the surround mode (vpage 69)
Adjusting the Sound and Picture Quality
(vpage 71)
n
n
n
uio p
<STATUS>
<TUNING PRESET>
<SOURCE SELECT>
[DEVICE
SELECT 1]
[DEVICE
SELECT 2]
[SOURCE
SELECT]
[SHIFT]
[MEMORY]
[DTU]
[TUNING]
[CHANNEL]
uiop
Button located on both the main unit
and the remote control unit BUTTON
Button only on the main unit <BUTTON>
Button only on the remote control unit [BUTTON]
Symbols used to indicate buttons in this manual
[TUNING]
[MODE]
[DTU]
[BAND]
Front Rear