Operation Manual

0
Getting Started Connections Settings Playback Remote ControlMulti-zone Information Troubleshooting Specifications
Selecting the Surround Mode (Surround Mode)
The desired mode according to the program source and viewing
situation can be selected from among 7 DENON original surround
modes.
1
Playing the source (vpage 52).
2
Select the surround mode by pressing DSP
SIMULATION.
5CH/7CH STEREO
ROCK ARENA
JAZZ CLUB
MONO MOVIE
VIDEO GAME
MATRIX
VIRTUAL
: This mode is for enjoying stereo sound from all
speakers.
: This mode is for enjoying the atmosphere of a
live concert in an arena.
: This mode is for enjoying the atmosphere of a
live concert in a jazz club.
: This mode is for playing monaural movie sources
with surround sound.
: This mode is suited for achieving surround sound
with video games.
: This mode lets you add a sense of expansion to
stereo music sources.
: This mode is for enjoying surround effects using
only the front speakers or headphones.
z : When playing sources recorded in monaural in the “MONO
MOVIE” mode, the sound will be off balance with a single channel
(left or right), so input to both channels.
z
Depending on the program source being played, it may not be possible
to achieve a satisfactory surround effect. In this case, try other modes
to achieve a sound field suited to your tastes.
e Direct Playback
In this mode the signals bypass the tone control circuitry for high
quality sound.
The sound is output to the same channels as the input signal.
Input signal
The indication contents of the
display
Analog signal /
PCM (2ch) /
Dolby Digital source /
DTS source /
Other 2-channel digital
signals
DIRECT
PCM (multi ch)
MULTI CH DIRECT
MULTI CH DIRECT + Dolby EX
MULTI CH DIRECT + PL
g
x CINEMA
MULTI CH DIRECT + PL
g
x MUSIC
MULTI CH DIRECT + PL
g
z HEIGHT
MULTI CH DIRECT 7.1
For details, see page 98.
1
Playing the source (vpage 52).
2
Press DIRECT/STEREO to select the “DIRECT”.
Displaying the Currently Playing Surround Mode
w Playing in a DENON Original
Surround Mode
This is the mode for playing in stereo. The tone can be adjusted.
Sound is output from the front left and right speakers and subwoofer.
This is the mode that recreates the original sound most faithfully,
providing extremely high quality sound.
1
Playing the source (vpage 52).
2
Press DIRECT/STEREO to select the “STEREO”.
1
Playing the source (vpage 52).
2
Press PURE DIRECT.
r Stereo Playback
t Playing the Pure Direct Mode
To cancel, press PURE DIRECT again.
During playback in PURE DIRECT mode, the surround parameters
are the same as in DIRECT mode.
Video signals are only output when HDMI signals are played in the
PURE DIRECT mode.
•
•
•
NOTE
When in the PURE DIRECT mode, the GUI menu display is not
displayed and the display on the main unit is turned off.
Playback
NOTE
When the input signal is DOLBY TrueHD, DOLBY DIGITAL Plus,DTS-
HD or DTS EXPRESS, you cannot select DENON original surround
mode.