AV SURROUND RECEIVER AVR-3310CI Owner’s Manual GAdditional functions editionH The AVR-3310CI owner’s manual is organized in the following two volumes. • GThe original versionH • GAdditional functions editionH·············This version Le manuel d’utilisation de l’AVR-3310CI est organisé en deux volumes, comme suit. • GLa version originaleH • GÉdition des fonctions supplémentairesH··········· La présente version This version contains descriptions of additional and changed functions only.
ENGLISH n Additional functions n Contents • Addition of Audyssey DSX™ (Dynamic Surround Expansion™) Getting Started Part Names and Functions····························································2 Remote Control Unit······································································2 Audyssey Dynamic Surround Expansion™ (DSX) Realistic reproduction of sound relies on the ability of audio systems to match human hearing performance.
ENGLISH Getting Started Getting Started Part Names and Functions Connections Remote Control Unit Main Remote Control Unit (RC-1118) q SPEAKERS button····························································································· (12, 15) Front Height Function when the button is pressed STANDARD Audyssey DSX ON/OFF (vpage 15) DSP SIMULATION Front Height ON/OFF (vpage 12) DIRECT/STEREO No function STANDARD Audyssey DSX ON/OFF (vpage 15) DSP SIMULATION Front Wide ON/OFF (vpage 12)
ENGLISH Getting Started Connections Installing / Setting the Speakers Connections Audyssey DSX™ is a function to reproduce sound with deeper and more spacious surround space. To use Audyssey DSX, install front wide or front height speakers. Settings a Determine the Speaker Layout Installing All the Speakers n When 7.
ENGLISH Speaker Connections s Set the “Amp Assign” Mode According to the Speaker Layout Front speakers A Center speaker Surround speakers Front Height Speakers (L) w (L) (R) q w q w q w (R) qw (L) w q (R) q w q */ Playback Front Height Example of speaker installation (Number of channels played) Settings SURR.
ENGLISH Getting Started Settings GUI Menu Map indicates functions modified by upgrading. Connections Pressing MENU displays the GUI menu. From this menu, you can move to various setting screens. Setting items Settings Audio / Video Adjust Adjust various audio and video parameters. Information Show information about receiver settings, input signals, etc. Detailed items Playback Information Unavailable Functions After Upgrading Adjust various audio parameters.
ENGLISH n Audyssey Auto Setup Flow When upgrading, contents of “Amp Assign” are modified.
ENGLISH Getting Started Make the Optimal Speaker Settings, and Correct the Room Acoustics (Audyssey™ Auto Setup) NOTE Connections Settings Playback Information • Loud test sounds may be played during Audyssey MultEQ® automatic speaker setup. This is part of normal operation. If there is background noise in room, these test signals will increase in volume. • Do not stand between the speakers and setup microphone or allow obstacles in the path while the measurements are being made.
ENGLISH For details on how to select, set and cancel settings for each menu, see “GUI Menu Operation” (vpage 26 of GThe original versionH Operating Instructions). Setting contents NOTE Perform when setting the speakers manually or when changing settings made in Audyssey Auto Setup. Sets the signal output to the speaker connected to the SURR. BACK/AMP ASSIGN terminals. Setting contents Normal : The surround back channel audio signals are output. ZONE2 : The ZONE2 audio signals are output.
ENGLISH Getting Started Making Detailed Settings (Manual Setup) Setting items Speaker Configuration (Continued) Setting contents Connections Surround Back : Set the presence, size and number of surround back speakers. • Large : Use of a large speaker that can adequately playback low frequencies. • Small : Use of a small speaker that has inadequate playback capacity for low frequencies. • None : Select when the surround back speakers are not connected.
ENGLISH Setting items Channel Level Setting contents Setting items Front Speaker Setup Set the front speakers to use for every surround mode. • –12.0dB ~ +12.0dB (0.0dB) : Adjust the volume. MULTI CH : The front speakers used in modes other than the direct, stereo and pure direct play modes (2 channel) are set in advance. • A : Front speaker A is used. • B : Front speaker B is used. • A+B : Both front speakers A and B are used.
ENGLISH Getting Started Playback Adjusting the Sound and Picture Quality (Audio/Video Adjust) Connections For details on how to select, set and cancel settings for each menu, see “GUI Menu Operation” (vpage 26 of GThe original versionH Operating Instructions). Settings When upgrading, contents of “Audio Adjust” are modified. For setting “Audio Adjust”, make settings by referring to this manual but not GThe original versionH Operating Instructions.
ENGLISH Setting items Surround Parameters (Continued) Setting contents Setting items Surround Parameters (Continued) • “Front Wide” is not displayed with the settings listed below. • When the ”Amp Assign” setting (vpage 8) is set to something other than “Front Wide” • When the “Speaker Configuration” – “Front Wide” setting (vpage 9) is set to “None”. • “Front Wide” can be set by pressing [SPEAKERS] in DENON original surround mode (DSP SIMULATION) (vpage 2).
ENGLISH Getting Started Adjusting the Sound and Picture Quality (Audio/Video Adjust) Setting items Surround Parameters (Continued) Connections Settings Playback Information Unavailable Functions After Upgrading Tone Adjust the tonal quality of the sound. Setting contents Setting items Audyssey Settings • This can also be set by pressing STANDARD. • If the source being played contains a surround back signal, the decoder type is automatically selected by the AFDM function.
ENGLISH Setting items Audyssey Settings (Continued) Setting contents Setting items Audyssey Settings (Continued) Dynamic EQ / Volume : OFF “OFF” “OFF” About Dynamic EQ Audyssey Dynamic EQ® solves the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. Audyssey Dynamic EQ works in tandem with Audyssey MultEQ® to provide well-balanced sound for every listener at any volume level. • “ ” is displayed when set to “ON”.
ENGLISH Getting Started Adjusting the Sound and Picture Quality (Audio/Video Adjust) Setting items Audyssey Settings Setting contents Setting items DSX Soundstage Operation on the main remote control unit (Continued) Dynamic EQ / Volume : ON Dynamic EQ : ON / Volume : OFF Connections “Green” “Green” Adjust Audyssey DSX™ setting and sound stage parameters. “Red” Setting contents Audyssey DSX : Provides more immersive surround sound by adding the new channels.
ENGLISH Setting items Manual EQ Setting items RESTORER Audio Delay 0ms ~ 200ms While viewing video, manually adjust the time to delay audio output. “Base Curve Copy” is displayed after Audyssey Auto Setup procedure has been performed. Unavailable Functions After Upgrading Default : Reset the settings to the default values. • Yes : Reset. • No : Do not Reset. OFF : Do not use RESTORER. RESTORER Mode 1 (RESTORER 64) : Optimized mode for compressed sources with This function restores very weak highs.
ENGLISH Getting Started Other Information Connections Surround Modes and Parameters Surround Signals and adjustability in the different modes Surround Mode Channel output Settings Front L/R Center Surround L/R Surround Back L/R Parameter (default values are shown in parentheses) Subwoofer Front Wide L/R Front Height L/R D. COMP z1 DRC LFE z2 AFDM z3 z1 Surround Back Cinema EQ.
ENGLISH Signals and adjustability in the different modes Parameter (default values are shown in parentheses) Surround Mode Delay Time Subwoofer Front Height Front Wide PRO LOGIC g/gx MUSIC mode only NEO:6 MUSIC mode only EXT. IN only Dimension Center Width Center Image Subwoofer Att.
ENGLISH Getting Started Unavailable Functions After Upgrading When upgrading, the RS-232C connector cannot be used for the DENON RF remote controller. Connections Connecting Devices Making Detailed Settings (Manual Setup) External Controller vpage 22 of GThe original versionH Operating Instructions Settings n RS-232C connector When you connect an external control device, you can control the AVR-3310CI with the external control device. Perform the operation below beforehand.
ENGLISH n Audio section • Power amplifier Rated output: Standard video connectors Input / output level and impedance: Frequency response: S-Video connectors Input / output level and impedance: Frequency response: • Color component video connector Input / output level and impedance: Frequency response: n HD Radio section Receiving Range: Usable Sensitivity: S/N (IHF-A): Total harmonic Distortion (at 1 kHz): 1 Vp-p, 75 Ω/ohms 5 Hz ~ 10 MHz — +0, –3 dB (when video convert set to
www.denon.com D&M Holdings Inc.