User's Guide


Getting Started Settings Playback Remote ControlMulti-zone Information Troubleshooting Specifications
Connecting Devices
Connecting the Recording Components
Connections
(/%
"6%*0
065
R
L
Turntable
(MM cartridge)
Record Player
The AVR-3310CI is compatible with record players with an MM
cartridge. When you connect to a record player with an MC
cartridge, use a commercially available MC head amp or a step-up
transformer.
When you increase the volume without connecting the record player,
there may be “booming” noise from the speakers.
•
•
NOTE
The SIGNAL GND terminal of the AVR-3310CI is not a safety ground
connection. Connect it to reduce noise when noise is excessive.
Note that depending on the record player, connecting the ground line
may have the reverse effect of increasing noise. In this case, it is not
necessary to connect the ground line.
Video Cassette Recorder
Select the terminal to use and connect the device.
R
L
R
L
R
L
R
L
3-
065
"6%*0 7*%&0
"6%*0
3-
*/
"6%*0
"6%*0
065
7*%&0
47*%&0
065
7*%&0
*/
7*%&0
47*%&0
*/
Video cassette recorder
NOTE
To record video signals through the AVR-3310CI, use the same type
of video cable for connection between the AVR-3310CI and the player
as the cable used for connection between the AVR-3310CI and the
recorder.
Set this to change the input signal to which the input source is
assigned.
“Input Assign” (vpage 45)
Set as Necessary
For instructions on HDMI connections, see “Connecting Devices
Equipped with HDMI Terminals” on page 14.
R
L
R
L
"6%*0
"6%*0
3-
065
$0"9*"-
065
CD player
CD Player
Select the terminal to use and connect the device.
Set this to change the input signal to which the input source is
assigned.
“Input Assign” (vpage 45)
Set as Necessary