User's Guide


Getting Started Settings Playback Remote ControlMulti-zone Information Troubleshooting Specifications
Connecting Devices
Connections
R
L
R
L
R
L
R
L
R
L
R
L
46#
800'&3
$&/5&3 463306/%
#"$,
3-
463306/%
3-
'30/5
3-
"6%*0
Component with Multi-channel Output connectors
The video signal can be connected in the same way as a Blu-ray Disc
player / DVD player (vpage 16 “Blu-ray Disc Player / DVD Player”).
When a device is connected to the SBL/SBR terminal of the external
input terminals (EXT. IN), set “Amp Assign” (vpage 34) to
“Normal”.
Blu-ray Disc player / DVD player /
External decoder
To play analog signals input from the external input (EXT. IN)
terminal, set “Input Mode” (vpage 49) to “EXT. IN”.
“EXT. IN” can also be selected with [INPUT MODE] on the main
remote control unit.
Set as Necessary
Connections to Other Devices
Video Camera / Game Console
Select the terminal to use and connect the device.
R
L
R
L
47*%&0
065
"6%*07*%&0
7*%&0
065 065
015*$"-"6%*0
3-
065
Video camera / Game console
Set this to change the input signal to which the input source is
assigned.
“Input Assign” (vpage 45)
Set as Necessary
USB Port
When you connect a USB memory device to the USB port, you can
enjoy music, etc., stored on the USB memory device.
NOTE
Do not use an extension cable when connecting a USB memory
device. This may cause radio interference with other devices.
USB memory
device