User's Guide


Getting Started Connections Playback Remote ControlMulti-zone Information Troubleshooting Specifications
Making Detailed Settings (Manual Setup)
Setting items Setting contents
Bass
Adjust low frequency range
(bass).
–10dB ~ +10dB (0dB)
Treble
Adjust high frequency range
(treble).
–10dB ~ +10dB (0dB)
HPF
Make settings for cutting
the low range to reduce
distortion in the bass.
OFF : The low range is not attenuated.
ON : The low range is attenuated.
Level Lch
Adjust the left channel
output level.
–12dB ~ +12dB (0dB)
The “Level Lch” can be set when “Channel“ (vpage 41) is set to
“Stereo“.
Level Rch
Adjust the right channel
output level.
–12dB ~ +12dB (0dB)
The “Level Rch” can be set when “Channel“ (vpage 41) is set to
“Stereo“.
Channel
Set the signal output from
multi-zone.
Stereo : Select stereo output.
Mono : Select mono output.
When “Amp Assign” (vpage 34) is set to “ZONE2/3-MONO”, the
“Channel” setting is automatically set to “Mono”.
Volume Display
Set how volume is
displayed.
Relative : Display - - - dB (Min), in the range –80 dB ~ 18 dB.
Absolute : Display in the range 0 (Min) ~ 99.
The “Volume Display” setting is applied also to the “Volume Level”,
“Volume Limit” and “Power On Level” display method.
The “Volume Display” setting applies to all zones.
•
•
Volume Level
Set the volume output level.
Variable : Volume adjustment enabled by main unit and remote
controller.
–40dB (41) : Fix volume at –40 dB. Set when adjusting volume by external
amp.
0dB (81) : Fix volume at 0 dB. Set when adjusting volume by external
amp.
When “Amp Assign” (vpage 34) is set to “ZONE2”, “ZONE3” or
“ZONE2/3-MONO”, the “Volume Level” setting is automatically set
to “Variable”.
Set the audio to playback with multi-zone (ZONE2, ZONE3).
Making the Multi-zone Settings (Zone Setup)
Default settings are underlined.
Setting
Setting items Setting contents
Volume Limit
Make a setting for maximum
volume.
OFF : Do not set a maximum volume.
–20dB (61) / –10dB (71) / 0dB (81)
Can be set when the multi-zone “Volume Level” setting (vpage 41)
is “Variable”.
Power On Level
Define the volume setting
that is active when the
power is turned on.
Last : Use the memorized setting from the last session.
– – – (0) : Always use the muting on condition when power is turned on.
–80dB ~ 18dB (1 ~ 99) : The volume is adjusted to the set level.
Can be set when the multi-zone “Volume Level” setting (vpage 41)
is “Variable”.
Mute Level
Set the amount of attenuation
when muting is on.
Full : The sound is muted entirely.
–40dB : The sound is attenuated by 40 dB down.
–20dB : The sound is attenuated by 20 dB down.
Setting items Setting contents
Volume Control
Set the MAIN ZONE volume
setting.
Volume Display : Set how volume is displayed.
Relative : Display - - - dB (Min), in the range –80 dB ~ 18 dB.
Absolute : Display in the range 0 (Min) ~ 99.
The “Volume Display” setting is applied also to the “Volume Limit” and
“Power On Level” display method.
The “Volume Display” setting applies to all zones.
•
•
•
•
Volume Limit : Make a setting for maximum volume
OFF : Do not set a maximum volume.
–20dB (61) / –10dB (71) / 0dB (81)
•
•
Power On Level : Define the volume setting that is active when the
power is turned on.
Last : Use the memorized setting from the last session.
– – – (0) : Always use the muting on condition when power is turned
on.
–80dB ~ 18dB (1 ~ 99) : The volume is adjusted to the set level.
•
•
•
Mute Level : Set the amount of attenuation when muting is on.
Full : The sound is muted entirely.
–40dB : The sound is attenuated by 40 dB down.
–20dB : The sound is attenuated by 20 dB down.
•
•
•
OPTION
Making Other Settings (Option Setup)
Default settings are underlined.
Main remote control
operation buttons
:Displaying the menu
Cancel the menu
:Moves the cursor
(Up/Down/Left/Right)
:Confirm the setting :Return to previous menu