Basic version Advanced version AVR-3313 INTEGRATED NETWORK AV RECEIVER DVD Informations Owner’s Manual
n SAFETY PRECAUTIONS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
n CAUTIONS ON INSTALLATION n NOTES ON USE z z z Wall zz For proper heat dispersal, do not install this unit in a confined space, such as a bookcase or similar enclosure. • More than 0.3 m is recommended. • Do not place any other equipment on this unit. Informations DVD z Advanced version • Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack. • Handle the power cord carefully. Hold the plug when unplugging the cord.
Thank you for purchasing this DENON product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference.
Accessories Features t y i o Digital video processor up-scales analog video signals (SD resolution) to 4K This unit is equipped with the 4K video upscaling function, which allows for outputting analogue or SD (standard video quality) video to HDMI at 4K (3840 × 2160 pixels). This enables the unit and a TV connected with a single HDMI cable and any video source to be reproduced precisely with HD level of quality.
Features First select the language when prompted. Then simply follow the instructions displayed on the TV screen to set up the speakers, network, etc. Easy to use, Graphical User Interface HDMI connectors enable connection to various digital AV devices (input: 7, output: 3) The unit is equipped with 7 HDMI input connectors for connecting devices with HDMI connectors, such as a Blu-ray Disc player, game machine, HD digital camcorder, etc.
Basic version Here, we explain the connections and basic operation methods for this unit.
Basic version Connections Important information Make connections before using this unit. To create a home theater that can play back higher quality video and audio by fully utilizing the capabilities of this unit and your video devices, connect this unit to each of your video devices with HDMI cables.
Important information Make Settings as Necessary This unit is equipped with three types of video input connectors (HDMI, Component video and video) and three types of video output connectors (HDMI, Component video and video). This function automatically converts various formats of video signals input to this unit into the formats used to output the video signals from this unit to a monitor.
Important information This unit Video device Input (IN) Output HDMI-compatible TV Output (ZONE2 MONITOR OUT) HDMI signal HDMI connector HDMI connector Input HDMI connector HDMI connector HDMI-incompatible TV Component video signal Component video signal Component video connectors Component video connectors Video signal Video connector Video signal Video connector DVD Component video connectors Video connector Video connector 7 Informations Component video connectors Advanced versi
Connecting an HDMI-compatible device nn Before connecting this unit to TV via HDMI connections (vpage 9) nn Connecting this unit to a TV via HDMI connections (vpage 10) Basic version You can connect up to ten HDMI-compatible devices (7-inputs/3-outputs) to the unit. When a TV is connected to the HDMI ZONE2 OUT connector, you can play back a video or audio from the device connected to the HDMI 1 - 6 IN connector in ZONE2 ( vpage 103).
Connecting an HDMI-compatible device nnAbout ARC (Audio Return Channel) function This function plays TV audio on this unit by sending the TV audio signal to this unit via HDMI cable. If a TV without the ARC function is connected via HDMI connections, video signals of the playback device connected to this unit are transmitted to the TV, but this unit can not play back the audio from the TV. If you want to enjoy surround audio for TV program, a separate audio cable connection is required.
Connecting an HDMI-compatible device NOTE • The audio signal from the HDMI output connector (sampling frequency, number of channels, etc.) may be limited by the HDMI audio specifications of the connected device regarding permissible inputs. • When connecting a TV that does not support the ARC function, an audio cable connection is required in addition to the HDMI cable. In this case, refer to “Connecting a TV” (vpage 15) for the connection method.
Connecting an HDMI-compatible device Connecting this unit to video devices via HDMI connections Cables used for connections Basic version Digital camcorder (Primary) HDMI OUT Audio and video cable (sold separately) HDMI cable • This interface allows transfer of digital video signals and digital audio signals over a single HDMI cable.
Connecting an HDMI-compatible device By making a Denon Link HD connection to a player compatible with the Denon Link HD function, you can enjoy higher quality playback compared with when only the HDMI connector connection is made. For the playback method, see “Playing a Blu-ray Disc player compatible with Denon Link HD” (vpage 37). This unit supports the following HDMI functions: nnAbout 3D function This unit supports input and output of 3D (3 dimensional) video signals of HDMI.
Connecting an HDMI-compatible device Basic version nnDeep Color (vpage 168) When a device supporting Deep Color is connected, use a cable compatible with “High Speed HDMI cable” or “High Speed HDMI cable with Ethernet”. Advanced version nnAuto Lip Sync (vpage 120, 168) nn“x.v.
Connecting an HDMI-incompatible device Connection methods for various devices vpage 16 vpage 17 vpage 18 Changing the source assigned to connectors Video cable (sold separately) This unit can change the source that is assigned to the HDMI IN, DIGITAL AUDIO IN and COMPONENT VIDEO IN connectors.
Connecting an HDMI-incompatible device Input connector setting When making the following connection, you must change the input connector settings. • This section describes how to connect when your TV does not support HDMI connections. For instructions on HDMI connections, see “Connecting an HDMI-compatible device” (vpage 8).
Connecting an HDMI-incompatible device Satellite tuner/Cable TV AUDIO This section describes how to connect when your satellite tuner or cable TV does not support HDMI connections. For instructions on HDMI connections, see “Connecting an HDMI-compatible device” (vpage 8).
Connecting an HDMI-incompatible device Input connector setting When making the following connection, you must change the input connector settings. This section describes how to connect when your DVD player does not support HDMI connections. For instructions on HDMI connections, see “Connecting an HDMI-compatible device” (vpage 8). a DIGITAL AUDIO OPTICAL connector When connecting to connectors marked as 1, change “TV AUDIO” to “DVD”. nnAudio connection For how to change, see “Input Assign” (vpage 125).
Connecting an HDMI-incompatible device Blu-ray Disc player AUDIO This section describes how to connect when your Blu-ray disc player does not support HDMI connections. For instructions on HDMI connections, see “Connecting an HDMI-compatible device” (vpage 8). AUDIO OUT L R VIDEO COAXIAL OUT OPTICAL OUT nnAudio connection The following methods are available for connecting to this unit. Use either of the methods to make a connection.
Connecting an HDMI-incompatible device Digital camcorder This section describes how to connect when your digital camcorder does not support HDMI connections. For instructions on HDMI connections, see “Connecting an HDMI-compatible device” (vpage 8). VIDEO AUDIO VIDEO OUT AUDIO OUT L R GFront panelH nnAudio connection The following methods are available for connecting to this unit. Use either of the methods to make a connection. The numbers prefixed with connectors indicate the recommendation order.
Connecting an HDMI-incompatible device Input connector setting When making the following connection, you must change the input connector settings. • This section describes how to connect when your media player does not support HDMI connections. For instructions on HDMI connections, see “Connecting an HDMI-compatible device” (vpage 8). • When recording analog audio, use the analog connection. • See “REC OUT mode” (vpage 99) for operating instructions.
Connecting an HDMI-incompatible device Connecting an iPod or USB memory device to the iPod/USB port • You can enjoy music stored on an iPod or USB memory device. • For operating instructions see “Playing an iPod” (vpage 39) or “Playing a USB memory device” (vpage 42). Basic version Supported iPod models • iPod classic Cables used for connections To connect an iPod to this unit, use the USB cable supplied with the iPod.
Connecting an HDMI-incompatible device CD player AUDIO You can enjoy CD sound. AUDIO OUT L R nnAudio connection The following methods are available for connecting to this unit. Use either of the methods to make a connection. The numbers prefixed with connectors indicate the recommendation order. The smaller the number is, the higher playback quality is achieved. s L R a or When a multichannel audio (digital bit stream audio) is input, this unit decodes the audio to play back surround sound.
Connecting an HDMI-incompatible device Turntable (MM cartridge) You can enjoy playing records. nnAudio connection The following methods are available for connecting to this unit. Basic version Connecting a record player a AUDIO IN (PHONO) connector This makes an analog audio connection. AUDIO OUT GND L NOTE The SIGNAL GND terminal of this unit is not a safety ground connection. Connect it to reduce noise when noise is excessive.
Connecting an HDMI-incompatible device Direction of broadcasting station • Connect the FM antenna supplied with the unit to enjoy listening to radio broadcasts. • After connecting the antenna and receiving a broadcast signal (vpage 45 “Listening to FM broadcasts”), fix the antenna with tape in a position where the noise level becomes minimal. FM outdoor antenna NOTE • Do not connect two FM antennas simultaneously.
Connecting a external power amplifier Subwoofer (Primary) • When using just one surround back speaker, connect it to the left channel (L) terminal. • Use the volume control on the subwoofer to control subwoofer volume. • If the subwoofer volume sounds low, use the volume control provided on the subwoofer to adjust the volume.
Connecting an external control device RS-232C connector TRIGGER OUT jacks If this unit is installed in a location that is out of range of the signal from the remote control unit, you can still operate the unit and the devices connected to it by using a commercially available IR receiver. You can also use it to remotely control ZONE2, ZONE3 (another room).
Connecting to a home network (LAN) Required system • Playback of network audio such as the Internet radio and music servers • Playback of music from online services • AirPlay • Operations on this unit via the network nnBroadband internet connection nnModem Device that connects to the broadband circuit and conducts communications on the Internet. A type that is integrated with a router is also available. nnRouter Network settings are necessary.
Connecting the power cord Basic version After completing all the connections, insert the power plug into the power outlet. Advanced version To household power outlet (AC 230 V, 50/60 Hz) Power cord (supplied) Informations NOTE • Do not plug in the power cord until all connections have been completed. • Do not bundle power cords together with connection cables. Doing so can result in humming or noise.
Here, we explain “Audyssey® Setup”, which allows you to automatically make the optimal settings for your speakers, and “Network”, which allows you to connect this unit to a home network (LAN). This unit lets you play via your home network (LAN) music files stored on a computer and music content such as that from Internet radio.
Set up speakers (Audyssey® Setup) Prepare the included setup microphone Mount the setup microphone on a tripod or stand and place it in the main listening position. When placing the setup microphone, adjust the height of the sound receptor to the level of the listener’s ear. Sound receptor Setup microphone 2 Set up the subwoofer If using a subwoofer capable of the following adjustments, set up the subwoofer as shown below. For details, see your subwoofer’s manual.
Set up speakers (Audyssey® Setup) 5 • This step automatically checks the speaker configuration and speaker size, and calculates the channel level, distance, and crossover frequency. It also corrects distortion in the listening area. Select “Start” and then press ENTER. When measuring begins, a test tone is output from each speaker. Audyssey Setup Connect the calibration microphone to the SETUP MIC input on the front the AV receiver. • Measurement requires several minutes.
Set up speakers (Audyssey® Setup) • In this step, you will perform measurements at multiple positions (two to eight positions) other than the main listening position. • Just one position can be measured but measuring multiple positions increases the accuracy of the correction of acoustic distortion within the listening area. When measurement of position 8 is completed, a “Measurements finished.” message is displayed.
Set up speakers (Audyssey® Setup) Store ui to select the item you 13 Use want to check, and then press ENTER. Finish 14 Select “Store” and then press ENTER. Save the measurement results. Audyssey Setup Check processing results. To proceed, press “Store”. Audyssey Setup You can set Dynamic Volume function, which automatically adjusts volume level for all content. Speaker Config. Distances Levels Crossovers Audyssey Setup Check processing results. To proceed, press “Store”.
Set up speakers (Audyssey® Setup) NOTE • An error message is displayed if Audyssey® Setup could not be completed due to speaker placement, the measurement environment, etc. If an error message is displayed, check the relevant items and perform the necessary measures. Then perform Audyssey® Setup again. • If the result still differs from the actual connection status after remeasurement or the error message still appears, it is possible that the speakers are not connected properly.
Set up speakers (Audyssey® Setup) This function enables you to check the measurement results and equalizer characteristics after Audyssey® Setup. This unit can be connected to a home network (LAN) to listen to Internet radio or play back music files and still image (JPEG) files stored on a computer. 1 Use ui to select “Parameter Check” and then press ENTER.
Basic version Playback (Basic operation) Important information Setup (vpage 29) nn Listening to internet radio (vpage 56) nn Playing back files stored on a PC and NAS (vpage 59) nn Using online services (vpage 63) nn Convenient functions (vpage 69) nn AirPlay function (vpage 73) NOTE Also refer to the operating instructions of the connected devices when playing them. Turning the power on Press POWER X to turn on power to the unit. The power indicator flashes green and the power turns on.
Important information Use VOLUME df to adjust the volume. • The volume display method varies depending on the “Scale” setting (vpage 116). GAdjustable rangeH 0.0 The following describes the procedure for playing Blu-ray Disc player/ DVD player. 1 Prepare for playback. q Turn on the power of the TV, subwoofer and player. w Change the TV input to the input of this unit. 0.5 – 98.0 nn When the “Scale” setting (vpage 116) is “–79.5dB – 18.0dB” GAdjustable rangeH – – –.– –79.5dB – 18.
Playing a Blu-ray Disc player compatible with Denon Link HD • Set the Blu-ray disc player’s “Denon Link” setting to “On”. For instructions on operation, refer to the Blu-ray disc player’s manual. • When a Blu-ray disc is played with the input mode set to “Auto”, playback is performed in the Denon Link HD mode. • When the input mode is set to “HDMI”, normal HDMI playback is performed. Playing Super Audio CD The following describes the procedure for playing CD player. 1 Prepare for playback.
Playing an iPod Listening to music on an iPod The iPod display modes include “Remote Mode” and “Browse Mode”. By default, “Remote Mode”, where you directly operate iPod itself while seeing the iPod screen, is set. To change to “Browse Mode”, where you perform operations while having the iPod information displayed on the TV screen, see “Setting Browse mode (Operation Mode)” (vpage 40). iPod to the iPod/USB port (vpage 21). Press POWER X to turn on 2 power to the unit.
Playing an iPod In this mode, various lists and screens during playback on iPod are displayed on the TV screen. This section describes the steps up to playing back tracks on iPod in “Browse Mode”. The option menu screen is displayed. The “Operation Mode” screen is displayed. Display mode Remote Mode Browse Mode P P Playable Music file files Video file Active buttons z Remote control unit (This unit) P iPod P P zzOnly the sound is played.
Playing an iPod nnPerforming random playback (Random) 1 Press OPTION while in Browse mode. 2 Use ui to select “Repeat”, then press ENTER. 1 2 Use ui to select “Random”, then press ENTER. The option menu screen is displayed. iPod Press OPTION while in Browse mode. The option menu screen is displayed. 00:06 Previous Next OPTION Option 100% Pause Back Use o p to select repeat playback mode. 3 Previous Next OPTION Option Use o p to select random playback mode.
Playing a USB memory device Important information • Only USB memory devices conforming to mass storage class and MTP (Media Transfer Protocol) standards can be played on this unit. • This unit is compatible with USB memory devices in “FAT16” or “FAT32” format. • This unit is compatible with MP3 files conforming to “MPEG-1 Audio Layer-3” standards. • File types that this unit can play back and specifications are shown below.
Playing a USB memory device the USB memory device to the iPod/USB 1 Connect port (vpage 21). iPod/USB to switch the 2 Press input source to “iPod/USB”. [1/9] Make this setting at “Restorer” (vpage 115) in the menu. You can use the “Restorer” function to restore to a state close to the audio before compression while correcting the bass feel to enjoy a richer playback experience. The default setting is “Mode 3 (Low)”. nnGoing back to the previous screen Press o or BACK.
Playing a USB memory device Operation buttons CH/PAGE df INFO OPTION Function Page search Display of information such as the source name, volume, and sound mode name Text Search / Repeat playback / Random playback / Picture View / Slideshow Cursor operation / Auto search (cue, ui) ENTER (Press and release) ENTER (Press and hold) BACK SETUP 8 9 1 3 2 Advanced version uio p Basic version nnUSB memory device operation buttons Enter Stop DVD Informations Return Setup menu Auto search (cue) Playback /
Listening to FM broadcasts Listening to FM broadcasts How to tune in 1 Press TUNER to switch the input source to “FM”. GTV ScreenH FM STEREO AUTO nn Tuning in by entering the radio frequency (Direct Tune) (vpage 47) Now Playing CH 1 TUNE+/- FM 87.50MHz Tune CH / Preset Advanced version The modes for receiving FM broadcasts consists of “Auto” mode that automatically searches available broadcast stations and “Manual” mode that lets you tune in using buttons to change the frequency.
Listening to FM broadcasts You can change the mode for tuning into FM broadcasts. If you cannot tune in automatically with “Auto” mode, then change the mode to “Manual” and tune in manually. 4 Use o p to select tuning mode, then press ENTER. GTV ScreenH 1 2 Press OPTION. Use ui to select “Tune Mode”, 3 then press ENTER. FM Press TUNER to switch the input source to “FM”. STEREO Now Playing Tune Mode FM 87.
Listening to FM broadcasts You can enter the receiving frequency directly to tune in. The option menu screen is displayed. The direct tuner screen is displayed and “–” in the display flashes. GTV ScreenH FM Option Direct Tune RDS Search STEREO AUTO Now Playing PTY Search FM 87.50MHz TP Search CH 1 Radio Text Tune Mode Auto Preset Memory TUNE+/- Tune CH / Preset OPTION Option GTV ScreenH FM STEREO FM ---.-MHz DIRECT TUNE Input FM ---.
Listening to FM broadcasts nnTuning in to radio stations and presetting them automatically (Auto Preset Memory) 4 Press ENTER. The unit starts to tune in to radio stations automatically and preset them. GTV ScreenH Up to 56 stations can be preset. If “Auto Preset Memory” is performed after performing “Preset Memory”, the “Preset Memory” settings will be overwritten. The option menu screen is displayed. GTV ScreenH FM STEREO Auto Preset Memory FM 87.
Listening to FM broadcasts Your favorite broadcast stations can be preset so that you can tune them in easily. Up to 56 stations can be preset. GTV ScreenH Option RDS Search STEREO Preset Memory 1 2 CH 1 FM 89.10MHz FM98.10MHz 87.50MHz FM 5 FM 90.10MHz 6 7 8 Tune STEREO FM 87.50MHz 3 4 Now Playing FM 90.10MHz FM 90.10MHz Preset CH / OPTION STEREO Preset OPTION AUTO Now Playing CH 1 Use CH/PAGE df or 0 – 9 to select the desired preset channel. GDisplay of this unitH FM 87.
Listening to FM broadcasts You can set the name to the preset broadcast station or change it. Up to eight characters can be input. The screen that lets you edit the preset name is displayed. The screen that lets you edit the preset name is displayed. • Each time o p is pressed, the setting is changed as shown below.
Listening to FM broadcasts You can set in advance, the stations you do not want to be displayed when tuning in, by groups or by stations. The preset skip setting is useful when tuning in, because only your favorite stations are displayed. The option menu screen is displayed. The Preset Skip screen is displayed. GTV ScreenH FM STEREO Preset Skip CH01 1–8 9 – 16 49 – 56 e Press BACK.
Listening to FM broadcasts 1 2 While the Preset Skip screen is displayed, use o p to select a group containing a broadcast station to cancel the skip for. Use ui to select a broadcast station to cancel the skip for. FM Preset Skip Set 1-8 to Skip Preset Group CH 1 TUNE+/- 1 2 3 4 5 6 7 8 Tune STEREO 1-8 AUTO Now Playing FM FM FM FM FM FM FM FM 87.50MHz On FM 87.50MHz 89.10MHz On 98.10MHz On 108.00MHz On 90.10MHz On 90.10MHz On 90.10MHz On 90.
Listening to FM broadcasts Use this function to find RDS stations broadcasting a designated program type (PTY). PTY identifies the type of RDS program.
Listening to FM broadcasts TP identifies programs that carry traffic announcements. This allows you to easily find out the latest traffic conditions in your area before leaving home. Use this function to find RDS stations broadcasting traffic programs (TP stations). TP search begins automatically. GTV ScreenH FM STEREO TP Search CH 1 FM 87.50MHz FM 87.50MHz - PS NAME - CH 1 AUTO Now Playing Search The option menu screen is displayed.
Listening to FM broadcasts RT allows RDS stations to send text messages that appear on the display. “Radio Text” appears on the display when radio text data is received. GTV ScreenH FM Press TUNER to switch the input source to “FM”. CH 1 FM 87.50MHz FM 87.
Listening to internet radio Internet radio refers to radio broadcasts distributed over the Internet. Internet radio stations from around the world can be received. Listening to internet radio Important information 1 Prepare for playback. GPlayable broadcast station typesH Supported file types Internet radio WMA (Windows Media Audio) P MP3 (MPEG-1 Audio Layer-3) P q Check the network environment, then turn on this unit’s power (vpage 27 “Connecting to a home network (LAN)”).
Listening to internet radio Make this setting at “Restorer” (vpage 115) in the menu. You can use the “Restorer” function to restore to a state close to the audio before compression while correcting the bass feel to enjoy a richer playback experience. The default setting is “Mode 3 (Low)”. Operations available through the OPTION button Press the OPTION button to display a menu of functions that can be used on the TV screen. Select the function you want to use from this menu.
Listening to internet radio There are many Internet radio stations in the world, and this unit can tune into these stations. But finding the radio station you want to hear may be difficult, because there are too many stations. If this is the case, then please use vTuner, an Internet radio station search website specifically designed for this unit. You can use your PC to search Internet radio stations and add them as your favorites. This unit can play radio stations added to vTuner.
Playing back files stored on a PC and NAS Basic version This unit can play back music files and playlists (m3u, wpl) stored on a PC and on Network Attached Storage (NAS) that supports DLNA. Important information • The network audio playback function of this unit connects to the server using technologies shown below. • Windows Media Player Network Sharing Service • Windows Media DRM10 • File types that this unit can play back and specifications are shown below.
Playing back files stored on a PC and NAS Here, we apply the settings to share music files stored on a PC and NAS on the network. nnSharing media stored in PC If you are using a media server, be sure to apply this setting first. When using Windows Media Player 12 (Windows 7) NOTE Perform this procedure after changing the control panel display to “Category”.
Playing back files stored on a PC and NAS Use this procedure to play music files, image files or playlists. 1 Prepare for playback. 2 Press NETWORK. Use uio p to select “Media 3 Server”, then press ENTER. Network Favorites Internet Radio Make this setting at “Restorer” (vpage 115) in the menu. You can use the “Restorer” function to restore to a state close to the audio before compression while correcting the bass feel to enjoy a richer playback experience. The default setting is “Mode 3 (Low)”.
Playing back files stored on a PC and NAS nn Searching content with keywords (Text Search) (vpage 69) Operation buttons TV X TV INPUT FAVORITE STATION 1 – 4 FAVORITE STATION 1 – 4 (Press and hold) CH/PAGE df INFO nn Performing random playback (Random) (vpage 70) nn Add to favorites from the Option menu (Favorite Memory) (vpage 71) nn Playing back still images in sequential order (Slideshow) (vpage 72) DVD uio p Add/call up favorites Add to the favorites list Page search Display of information such as
Using online services nnAbout Last.fm (vpage 64) nnAbout Flickr (vpage 67) Last.fm learns what you love... and it’s a great way to discover new music. Your new DENON AV receiver is very clever. You can create a free Last.fm profile when you start using your DENON AV receiver and magically keep track of all the songs you hear. When you sign in at http://www.last.
Using online services Last.fm radio is not available in all countries. Please check http://www.last.fm/hardware for more information. You’ll also need a subscription. Get one today at http://www.last.fm/subscribe. inputting the username and password, select a Last.fm account, press ui to select “I 4 Ifhaveyouahave 6 After “OK”, then press ENTER. Last.fm account”. Then press ENTER or p. 1 Prepare for playback. 2 Press NETWORK. uio p to select “Last.fm”, 3 Use then press ENTER.
Using online services Menu [1/3] Love this track Ban this track Scrobbling (On) nnAdjusting the sound quality (Restorer) Make this setting at “Restorer” (vpage 115) in the menu. You can use the “Restorer” function to restore to a state close to the audio before compression while correcting the bass feel to enjoy a richer playback experience. The default setting is “Mode3 (Low)”. nnSwitching the screen display nnLog out Disassociate this unit from your Last.fm account. the Last.
Using online services Operation buttons CH/PAGE df INFO uio p Basic version nnLast.
Using online services You can view photographs shared by particular users, or all of the photographs shared on Flickr. nnViewing photographs shared by particular users 1 Prepare for playback. 2 Press NETWORK. uio p to select “Flickr”, 3 Use then press ENTER. Favorites Internet Radio . The screen name is added to “Contact”, and the screen name you entered in Step 5 is displayed on the top screen of Flickr.
Using online services to select “All Content”, then press ENTER 1 orUsepui . Flickr [1/2] Add Flickr Contact nnFlickr operation buttons Operation buttons TV X TV INPUT CH/PAGE df INFO All Content uio p OPTION Option to select the folder, and then press ENTER 2 orUsepui . Interestingness Displays photographs that are popular from the number of user comments or number of times they are added as favorites. Search by text Displays the most recently added photographs. Search for photographs by keyword.
Convenient functions nn Searching content with keywords (Text Search) (vpage 69) USB Internet Radio 1 2 Use ui to select “Text Search”, then press ENTER. While content is playing, press OPTION. The keyboard input screen is displayed. USB [1/9] Option D&M1 D&M2 nn Favorites function (vpage 71) D&M3 Music1 Playback starts.
Convenient functions Media Server USB Performing random playback (Random) Media Server USB 1 While content is playing, press OPTION. 2 Use ui to select “Repeat”, then press ENTER. The option menu screen is displayed. The option menu screen is displayed.
Convenient functions Playing back content added in “Favorite Memory” There are two ways to add content to favorites: q Add to favorites from the Option menu w Add to the FAVORITE STATION button 1 uio p to select “Favorites”, 2 Use then press ENTER. nnAdd to favorites from the Option menu (Favorite Memory) Press NETWORK. Network Media Server Internet Radio Favorites Internet Radio The option menu screen is displayed.
Convenient functions 1 Press NETWORK. uio p to select “Favorites”, 2 Use then press ENTER. USB Internet Radio Media Server Playing back still images in sequential order (Slideshow) You can play back still image (JPEG) files stored on a USB memory device or media server and pictures on Flickr website as a slide show. The display time can also be set. 1 Play back a still picture (vpage 67). back a music file or Internet radio station 2 Play 1 Play back an image and press OPTION. (vpage 56, 61).
AirPlay function zzAvailable as a free download from the App Store. nnStreaming music stored in iPhone, iPod touch, or iPad directly to the unit Selecting multiple speakers (devices) iTunes 10, or later, on a Mac or Windows PC 1 Install that is connected to the same network as this unit. Click the AirPlay icon and select “Multiple Turn this unit ON. 1 Speakers” from the list. 2 2 Check the speakers you want to use.
AirPlay function With this unit’s remote control unit, you can perform iTunes song play, pause, and auto search (cue) operations. Devices General Playback Sharing Store Parental Devices is displayed on the menu screen while AirPlay is being operated. • Source input will be switched to “NETWORK” when AirPlay playback is started. • You can stop AirPlay playback by pressing the o or choosing other input source. • To see song and artist names together, press STATUS on the main unit.
This unit allows you to enjoy various kinds of surround and stereo playbacks. Multi-channel audio formats are adopted by many of the contents including Blu-ray disc and DVD as well as digital broadcasting and Internet-delivered movies and music. This unit supports playback of almost all of these multi-channel audio formats. It also supports surround playback of audio formats other than multi-channel audio such as 2-channel stereo audio.
Selecting a listening mode • The following listening modes can be selected using the MOVIE, MUSIC, GAME, and PURE buttons. • Adjust the sound field effect with the menu “Surround Parameter” (vpage 113) to enjoy your favorite sound mode.
Selecting a listening mode Input signal 2-channel z1 z3 STEREO DOLBY PLgx Music z2 DOLBY PLg Music z2 / DOLBY PLg Music A-DSX z4 DTS NEO:6 Music z2 / DTS NEO:6 Music A-DSX z4 DOLBY PLgz Height z2 MULTI CH STEREO ROCK ARENA JAZZ CLUB MATRIX VIRTUAL STEREO DVD Input signal DTS-HD / DTS Express PCM multichannel Multi-channel z3 Listening mode DTS-HD HI RES / DTS-HD HI RES A-DSX z4 DTS-HD MSTR / DTS-HD MSTR A-DSX z4 DTS Express / DTS Express A-DSX z4 DTS-HD + NEO:6 DTS-HD + PLgx Music DTS-HD + PLgz MUL
Selecting a listening mode Input signal 2-channel z1 z3 STEREO DOLBY PLgx Game z2 DOLBY PLg Game z2 / DOLBY PLg Game A-DSX z4 DOLBY PLgz Height z2 MULTI CH STEREO VIDEO GAME VIRTUAL STEREO DVD Input signal All Listening mode Views on the TV screen or display e DIRECT PURE DIRECT z1 2-channel also includes analog input. z2 This mode plays back 2-channel source in 5.1 or 7.1-channel playback. It cannot be selected when headphones are used, or when only front speakers are used.
Selecting a listening mode Dolby listening mode DTS listening mode Listening mode type DOLBY PLgxz1 DOLBY Pro Logic DOLBY PLgzz2 DOLBY TrueHD DOLBY DIGITAL Plus DTS SURROUND DTS ES DSCRT6.1z DTS ES MTRX6.1z DTS 96/24 DTS-HD DTS Express zz This can be selected when “Speaker Config.” – “Surr. Back” is not set to “None”. PCM multi-channel listening mode Listening mode type MULTI CH IN Description This mode can be selected when playing multi-channel PCM sources .
Selecting a listening mode Listening mode type Audyssey DSX (A-DSX)z STEREO listening mode Description Listening mode type STEREO This mode creates playback for the new channels (front wide or front height) in 5.1-channel systems. By adding front wide or front high channels, the surround sound effects sound more three dimensional and realistic.
Advanced version Here, we explain functions and operations that let you make better use of this unit.
Procedure for speaker settings Speaker installation Speaker connection (vpage 84) Speaker installation • Determine the speaker system depending on the number of speakers you are using and install each speaker and subwoofer in the room. Here, we explain how to install the speakers using a typical example. • The speaker impedance should be from 6 to 16 Ω. This unit is compatible with Audyssey DSX® (vpage 168) and Dolby Pro Logic gz (vpage 168), which offers an even wider and deeper surround sensation.
Speaker installation When 5.1ch speakers are installed FL When using Audyssey DSX®, install front wide speakers or front height speakers. When using Dolby Pro Logic gz, install front height speakers. FL FR SW FR SW Basic version When 7.1-channel speakers are installed When 6.
Speaker connection Connecting the speaker cables Carefully check the left (L) and right (R) channels and + (red) and – (black) polarities on the speakers being connected to this unit, and be sure to interconnect the channels and polarities correctly. off about 10 mm of sheathing from the tip of the speaker 1 Peel cable, then either twist the core wire tightly or terminate it. 2 Turn the speaker terminal counterclockwise to loosen it.
Speaker connection Basic version Connecting 7.1-channel speakers using surround back, front height, and front wide speakers Advanced version The illustration on the right shows a connection example for performing 7.1-channel playback using the surround back, front height or front wide speakers.
Speaker connection Basic version Connecting 6.1-channel speakers using one surround back speaker If using only one surround back speaker, connect to the “L” side of the SURROUND BACK terminal. For speaker settings in this case, see “When 6.1ch speakers are installed” (vpage 83). To perform 6.1-channel playback using the surround back speaker, set “Assign Mode” to “Main Only” in steps 3 to 5 for “Set up “Amp Assign”” (vpage 92). Also use the “Speaker Config.” setting (vpage 131) to set “Surr.
Speaker connection Basic version Connecting 5.1-channel speakers To perform 5.1-channel playback, set “Assign Mode” to “Main Only” in steps 3 to 5 for “Set up “Amp Assign”” (vpage 92). Cables used for connections Audio cable (sold separately) Advanced version Speaker cable Subwoofer cable NOTE • For speaker cable connections, see page 84. • For speaker impedance , see page 84.
Speaker connection Basic version Connecting front A/B speakers You can connect a second set of speakers to this unit and use them for playback. In this case, set “Assign Mode” to “Front B” in steps 3 to 5 for “Set up “Amp Assign”” (vpage 92). Cables used for connections Audio cable (sold separately) Advanced version Speaker cable Subwoofer cable For multichannel playback, connect center, surround, surround back, and front speakers and a subwoofer.
Speaker connection Basic version Connecting 2.1-channel speakers Cables used for connections Audio cable (sold separately) Speaker cable Advanced version Subwoofer cable NOTE • For speaker cable connections, see page 84. • For speaker impedance , see page 84. nnFor connecting two subwoofers Two subwoofers can be connected to this unit. The same signal is output from each subwoofer terminal.
Speaker connection Basic version Connecting front speakers with a bi-amp connection • You cannot use surround back speakers in a bi-amp connection. Use front speakers that support a bi-amp connection and connect the speakers to the FRONT speaker terminals and the SURROUND BACK speaker terminals. In this case, set “Assign Mode” to “Bi-AMP” in steps 3 to 5 for “Set up “Amp Assign”” (vpage 92).
Speaker connection Multi channel playback (Sound mode) Advanced version You can connect the other front speakers for 2-channel playback using the DIRECT mode or STEREO mode. The speakers used exclusively for 5.1-channel playback and the speakers used exclusively for 2-channel playback are automatically switched for playback in accordance with the surround mode.
Set up speakers around items indicate the settings. First install and connect the speakers to this unit. Before Audyssey® Setup measurement, the settings shown below can be made. • Changing the amplifier assignment (Amp Assign) The signal output from the SURROUND BACK speaker terminal of this unit can be switched to match your speaker environment (vpage 92 “Set up “Amp Assign””).
Set up speakers speakers, and then press ENTER. 7 Set up “Channel Select” Use ui to select “Channel Select”, and then press ENTER. 8 Use ui to select a channel, and then press ENTER. Subwoofer Select for no subwoofers to be used. In this case, go to step 10. Surround Back Select the number of surround back speakers to be used. In this case, go to step 11. • “Surround Back” can be set when “Assign Mode” is set to “Main Only”. Front Height Select for no front height speakers to be used.
Set up speakers NOTE After performing Audyssey® Setup, do not change the speaker connections or subwoofer volume. In event of a change, perform Audyssey® Setup again. Basic version 10 Use o p to set whether or not a subwoofer channel is measured, and then press ENTER. Measure Set for measuring a subwoofer. Set for no measuring of a subwoofer. Advanced version Skip o p to set whether or not a surround back 11 Use channel is measured, and then press ENTER.
HDMI control function Setup (vpage 29) Playback (Basic operation) (vpage 36) Selecting a listening mode (Sound Mode) (vpage 75) nnOperations possible by HDMI control • To use this unit to play the audio of a TV that does not support the ARC function, connect the TV with an optical-digital or analog connection (vpage 9). • To use the pass-through function, connect an HDMI connection device that is compatible with HDMI control.
HDMI control function 96 Informations DVD • When “HDMI Control” is set to “On”, it consumes more standby power. • The HDMI control function controls operations of a TV that is compatible with the HDMI control function. Make sure that the TV and HDMI are connected when you perform HDMI control. • Some functions may not operate depending on the connected TV or player. Check the owner’s manual of each device for details beforehand.
Sleep timer function MAIN to switch the zone 1 Press mode to the MAIN ZONE. • The sleep timer setting is canceled if this unit’s power is set to standby. • The sleep timer function can be set separately for the different zones (vpage 105 “Sleep timer function”). NOTE 2 Press SLEEP and display the time you want to set. indicator on the display lights. Advanced version The sleep timer function cannot turn off the power of devices connected to this unit.
Quick select function Press QUICK SELECT. The Quick Select settings for the button you pressed are called up. nnChanging the settings 1 Set the items below to the settings you want to save. q w e r Input sourcez (vpage 36) Volume (vpage 37) Sound Mode (vpage 75) Audyssey (Audyssey MultEQ® XT, Audyssey Dynamic EQ®, Audyssey Dynamic Volume®) (vpage 116) The current settings will be memorized. zz The number for the QUICK SELECT button you pressed is displayed.
REC OUT mode Press ZONE2 / REC SOURCE until “RECOUT 1 SOURCE” is displayed. Advanced version NOTE Press ZONE2 / REC SOURCE to choose the input source to be recorded. ZONE2 CBL/SAT RECOUT DVD ZONE2 DVD ···· ···· ZONE2 SOURCE RECOUT CBL/SAT • Recordings you make are for your personal enjoyment and should not be used for other purposes without permission of the copyright holder. • Input sources for which “Hide” is selected at “Hide Sources” (vpage 127) cannot be selected.
Web control function • This unit and the PC need to be connected to the network properly (vpage 27 “Connecting to a home network (LAN)”) in order to use the web control function. • Depending on the settings of your security-related software, you may not be able to access this unit from your PC. If this is the case, then change the settings of the security-related software. File For example, if the IP address of this unit is “192.168.100.19”, enter “http://192.168.100.19/”. File http://192.168.100.
Web control function t GExample 2H Setup menu screen GExample 1H MAIN ZONE control screen y ZONE CONTROL NETWORK iPod/USB FM DENON AVR-3313 Q1 MAIN ZONE u SPEAKERS GAME AUX-1 AUX-2 MEDIA PLAYER TV AUDIO FM CD PHONO Internet Radio iPod/USB 3 2 Q5 USER ACCOUNT GENERAL ON OFF Auto Lip Sync AVR TV HDMI Audio Out Auto(Dual) Video Output ON OFF HDMI Control ***** Standby Source ***** Control Monitor Power Off Control ***** FIRMWARE SAVE LOAD Q4 Q8 i/p Scaler Resolution Aspect Ratio STE
Various memory functions This function sets the settings (input mode, sound mode, HDMI output mode, MultEQ® XT, Dynamic EQ, audio delay etc.) last selected for the individual input sources. Basic version Personal memory plus function The surround parameters, tone settings and the volumes of the different speakers are stored for the individual sound modes. Advanced version Last function memory This function stores the settings which were made before going into the standby mode.
• You can operate this unit so as to enjoy audio in a room (ZONE2, ZONE3) other than the MAIN ZONE (room where the unit is located). • You can simultaneously play back the same source in both the MAIN ZONE, ZONE2 and ZONE3. You can also play back separate sources in the MAIN ZONE, ZONE2 and ZONE3. • When a TV is connected to the HDMI ZONE2 OUT connector, you can play back a video or audio from the device connected to the HDMI 1 - 6 IN connector in ZONE2 (HDMI ZONE2 function).
Audio output Video output Video Connection nnAudio connections (ZONE2, ZONE3) The audio signals of this unit’s ZONE2 and ZONE3 audio output terminals are output to the ZONE2 and ZONE3 amplifiers and played on these amplifiers. ZONE2 The video signals of this unit’s ZONE2 video output connector are played by the ZONE2 TV.
Sleep timer function Playback Adjusting the volume Use VOLUME df to adjust the volume. ZONE2 or ZONE3 lights. 2 Press POWER X to turn on the ZONE2 or ZONE3 power. 3 Press the input source select button to select the input source to be played. GAdjustable rangeH 0 – 40 – 98 (When the “Scale” (vpage 116) setting is “0 – 98”) –79dB – –40dB – 18dB GAdjustable rangeH – – – (When the “Scale” (vpage 116) setting is “–79.5dB – 18.
Basic version How to make detailed settings Menu map For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page. By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences.
Menu map Detailed items General Description Page 140 140 140 141 141 Advanced version 141 141 141 141 142 Informations Sets the language for display the menu on the TV screen. ZONE2 Setup Makes settings for audio playback in a ZONE2 system. ZONE3 Setup Makes settings for audio playback in a ZONE3 system. Zone Rename Change the display title of each zone to one you prefer. Quick Select Names Change the “Quick Select” display title to one you prefer.
Examples of menu screen displays GExample 2H Audyssey® Setup screen (with illustration) GExample 1H Menu selection screen (Top menu) Setup Menu i Audio q e Video o Inputs w Speakers Network General Amp Assign Channel Select Setup Assistant Q1 q Currently selected setup icon w List of GUI menu setup icons e Currently selected setup item r List of GUI menu setup items Start Q0 i Currently selected setup icon o Operation guidance text Channel Select Q0 Illustration Q1 Selected setup item Infor
Examples of menu and front display Menu display Top menu display Front display Description q Press SETUP to display the menu screen. w TV screen: Displays the selected line. Display: Displays the selected item. • Use ui to move to the item you want to set. Setup Menu w Audio Video Inputs Speakers w Network *SETUP MENU Audio Basic version Below we describe typical examples of displays on the TV screen and on the set’s display window.
Inputting characters Keyboard screen the screen for inputting 1 Display characters (vpage 106 “Menu Select a character on the TV screen to input characters. nnDisplay of a keyboard input screen map”). Inputs/Source Rename q w J K L M 0 1 2 3 4 5 6 7 8 9 ! “ A B C D E e I N O P Q R S T U V W X Y ( ) * + $ % & r F G H a/A ‘ SPACE t , INSERT y u ; < = > DELETE i Z # OK o Allows you to change the names of the source inputs a character to be changed.
Inputting characters 2 nnDisplay of a 10 Key input screen • The types of characters that can be input are as shown below. Inputs/Source Rename Set Defaults CBL/SAT q 1 w DVD Blu-ray Blu-ray GAME GAME MEDIA PLAYER MEDIA PLAYER TV AUDIO TV AUDIO AUX1 AUX1 Changes the display name for this source q Cursor w Character input section Using the number buttons the keyboard screen is 1 When displayed, press 0 – 9. The 10 key input screen is displayed.
Make audio-related settings. Items that can be set with the “Audio” procedure Menu operation Surround Parameter (vpage 113) 1 Press MAIN to switch the zone mode to the MAIN ZONE. 2 Press SETUP. 3 Use ui to select the menu to be set or operated. 4 Press ENTER or p to enter the setting. Tone (vpage 115) MAIN lights. Subwoofer Level (vpage 115) Restorer (vpage 115) Audio Delay (vpage 116) • To return to the previous item, press o or BACK. • Exiting the Menu, press SETUP while the menu is displayed.
Audio Default settings are underlined. You can adjust the surround audio sound field effects to match your preferences. The items (parameters) that can be adjusted depend on the signal being input and the currently set sound mode. For details on the adjustable parameters, see “Sound modes and surround parameters” (vpage 160). NOTE • Some setting items cannot be set while playback is stopped. Make the settings during playback. • When the sound mode is “PURE DIRECT”, you cannot set the surround parameters.
Audio Setting items Setting details Speaker Select Surround Back : Sound is output from the surround back speakers. Make settings for the Height : Sound is output from the front height speakers. speakers outputting sound Wide : Sound is output from the front wide speakers. when playing back in original NOTE surround mode. Only speakers that are set to something other than “None” in “Speaker Config.” (vpage 130) can be selected. Set Defaults Yes : Reset to the defaults.
Audio Default settings are underlined. Adjust the tonal quality of the sound. Setting items Subwoofer Level Sets the subwoofer on/off and its output level. Setting details Setting items Tone Control On : Allow tone adjustment (bass, treble). Set the tone control function Off : Playback without tone adjustment. to “On” and “Off”. “Tone Control” can be set when “Dynamic EQ” (vpage 117) is set to “Off”. Subwoofer Turn subwoofer output on and off. Treble Adjust treble.
Audio Default settings are underlined. Audyssey Set Audyssey MultEQ® XT, Audyssey Dynamic EQ® and Audyssey Dynamic Volume®. These can be selected after Audyssey® Setup has been performed. For additional information on Audyssey technology, please see page 168. While viewing video, manually adjust the time to delay audio output. Setting details 0ms – 200ms NOTE Volume Default settings are underlined. Set the MAIN ZONE (room where the unit is located) volume setting.
Audio Dynamic EQ Solve the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. Works with MultEQ® XT. Setting items Audyssey DSX® Provides more immersive surround sound by adding the new channels. On : Use Dynamic EQ. Off : Do not use Dynamic EQ. is displayed when set to “On”. NOTE When the menu “Dynamic EQ” setting is “On”, it is not possible to do “Tone Control” (vpage 115) adjustment.
Audio Default settings are underlined. Use the graphic equalizer to adjust the tone of each speaker. “Graphic EQ” can be set when “MultEQ® XT” setting (vpage 116) is “Graphic EQ”. Setting items Curve Copy Copy “Audyssey Flat” (vpage 116) curve from MultEQ® XT. q Select the speaker. w Select the adjustment frequency band. 63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz • Select the speakers you want to adjust when “Left/Right” or “Each” is selected. e Adjust the level. –20.0dB – +6.
Make video-related settings. Items that can be set with the “Video” procedure NOTE When HDMI ZONE2 function is used, these settings are not available. Picture Adjust (vpage 120) Menu operation HDMI Setup (vpage 120) MAIN lights. Output Settings (vpage 121) The menu is displayed on the TV screen. Component Video Out (vpage 122) Volume Display (vpage 123) Info Display (vpage 123) Advanced version 1 2 Press SETUP. 3 Use ui to select the menu to be set or operated.
Video Default settings are underlined. Setting items Make settings for HDMI video/audio output. Setting details Setting items Auto Lip Sync Make automatic compensation for timing shift in audio and video output. HDMI Audio Out Select HDMI audio output device. –6 – +6 (0) 0 – +12 –6 – +6 (0) Video Output Make settings for HDMI monitor output. –6 – +6 (0) Off / Low / Medium / High 0 – +12 • “Picture Adjust” can not be set when component video and video signals are output.
Video Setting details Output Settings Makes screen-related settings. zz “Blu-ray”, “GAME”, “AUX2”, “TV AUDIO” or “CD” can be set when “HDMI” or “COMP” (vpage 126) has been assigned. “Output Settings” can not be set when 4K signals are input. Setting items Video Mode Make settings for video processing. NOTE • When “HDMI Control” is set to “On”, it consumes more standby power. If you are not using this unit for an extended period, it is recommended that you unplug the power cord from the power outlet.
Video i/p Scaler Convert the input source resolution to the resolution set. CBL/SAT DVD z Blu-ray GAME z AUX1 z AUX2 MEDIA PLAYER Resolution Set the output resolution. You can set “Resolution” separately for HDMI output of the analog video input and HDMI input. TV AUDIO z Analog : Use i/p scaler function for analog video signal. Analog & HDMI : Use i/p scaler function for analog and HDMI video signal. HDMI : Use i/p scaler function for HDMI video signal. Off : Do not use i/p scaler function.
Video Default settings are underlined. Sets where to display the master volume level. Setting items Volume TV Format Set the video signal format to be output for the TV you are using. Setting details Setting items Bottom : Display at the bottom. Top : Display at the top. Off : Turn display off. Format Default settings are underlined. Displays status of operation temporarily when the sound mode is changed, or input source is switched. You can set whether or not to show each of these status displays.
Perform settings related to input source playback. • You do not have to change the settings to use the unit. Make settings when needed. Items that can be set with the “Inputs” procedure Menu operation Input Assign (vpage 125) 1 Press MAIN to switch the zone mode to the MAIN ZONE. 2 Press SETUP. 3 Use ui to select the menu to be set or operated. 4 Press ENTER or p to enter the setting. Basic version Inputs Source Rename (vpage 126) MAIN lights.
Inputs This unit has certain input sources such as “CBL/SAT” assigned to audio and video connectors by default. By making the default connections, you can simply press an input source select button to play back audio or video from the connected device with ease. When making connections other than the default settings, you must change settings in this section.
Inputs Setting details DIGITAL Set this to change the digital input connectors assigned to the input sources. COAX 1 / COAX 2 / OPT 1 / OPT 2 : Assign a digital input connector to the selected input source. D.LINK : Assign the digital input connector when the Denon Link connection is established to a player compatible with the Denon Link HD function (vpage 12). None : Do not assign a digital input connector to the selected input source.
Inputs Default settings are underlined. Remove from the display input sources that are not used. Input Select Set the audio input mode and decode mode of each input source. The input modes available for selection may vary depending on the input source. Setting details Setting items CBL/SAT / DVD / Blu-ray / GAME / AUX1 / AUX2 / MEDIA PLAYER / iPod/USB / CD / FM / NETWORK / TV AUDIO / PHONO : Select input source that is not used. • Show : Use this source. • Hide : Do not use this source.
Inputs Default settings are underlined. Video of another input source is played back combined with the playing audio. Setting details Default : Play the picture and sound of the input source. Blu-ray / DVD / TV AUDIO / CBL/SAT / GAME / MEDIA PLAYER / AUX1 / AUX2 / CD : Select video input source to view. The video of the selected input source is played along with the audio currently being played. This can be set for individual input sources.
Set when changing Audyssey® Setup settings. • If you change the speaker settings after performing Audyssey® Setup, it will not be possible to set Audyssey MultEQ® XT, Audyssey Dynamic EQ® and Audyssey Dynamic Volume® (vpage 116). • Can be used without changing the settings. Please set if necessary. Items that can be set with the “Speakers” procedure Menu operation Manual Setup (vpage 130) 1 2 Press SETUP. 3 Use ui to select the menu to be set or operated. 4 Press ENTER or p to enter the setting.
Speakers Perform when setting the speakers manually or when changing settings made in Audyssey® Setup. • If you change the speaker settings after performing Audyssey® Setup, it will not be possible to select Audyssey MultEQ® XT, Audyssey Dynamic EQ® and Audyssey Dynamic Volume® (vpage 116). • “Manual Setup” can be used without changing the settings. Please set if necessary. Setting items Amp Assign Select power amplifier usage method to match your speaker system.
Speakers Speaker Config. (Continued) Setting details Setting items Surr. Back : Set the presence, size and number of surround back speakers. • Large : Use a large speaker that can adequately play back low frequencies. • Small : Use a small speaker that has inadequate playback capacity for low frequencies. • None : Select when the surround back speakers are not connected. Bass Set subwoofer and LFE signal range playback. • “Subwoofer Mode” can be set when “Speaker Config.
Speakers Distances Set distance from listening position to speakers. Measure beforehand the distance from the listening position to each speaker. Setting details Setting items Unit : Set the unit of distance. • Meters / Feet Step : Set the minimum variable width of the distance. • 0.1m / 0.01m • 1ft / 0.1ft Set Defaults : The “Distances” settings are returned to the default settings. • Yes : Reset to the defaults. • No : Do not reset to the defaults. Levels Test Tone Start : Output test tone.
Speakers Crossovers Set the maximum frequency of the bass signal output from each channel to the subwoofer. Set the Crossover Frequency to suit the bass reproduction capability of the speaker being used. Crossover : Set the crossover frequency. • 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz / Individual : Set the crossover frequency for all speakers. See the speaker manual for information concerning speaker crossover frequency.
Speakers 2ch Playback (Continued) Setting details Basic version Setting items SW Mode : Select low range signals to be reproduced by subwoofer. • LFE : When the “2ch Playback” – “Front” setting is set to “Large”, the LFE signal alone is output from the subwoofer. Also, when the “2ch Playback” – “Front” setting is set to “Small”, the front channel low range signal is added to the LFE signal output from the subwoofer.
To use this unit by connecting it to a home network (LAN), you must configure network settings. If you set up your home network (LAN) via DHCP, set “DHCP” to “On” (use the default setting). This allows this unit to use your home network (LAN). If you assign an IP address for each device, you must use the “IP Address” setting to assign an IP address to this unit and enter the information about your home network (LAN) such as the gateway address and subnet mask.
Network Friendly Name Display network information. The Friendly Name is the name of this unit displayed on the network. You can change the Friendly Name according to your preferences. Setting details Setting items Friendly Name / DHCP=On or Off / IP Address / MAC Address Edit Name Edits Friendly Name. MAC Address is required to make a vTuner account. Default settings are underlined. Set the network function on/off during standby.
Network Default settings are underlined. Make settings for wired LAN. Only set “Settings” when connecting to a network without a DHCP function. Network e Network/Settings DHCP IP Control IP Address 192.168.000.001 Friendly Name Subnet Mask 255.255.255.000 Default Gateway 255.255.255.000 Primary DNS 000.000.000.000 Secondary DNS 000.000.000.
Network nn Proxy settings Make this setting when connecting to the Internet via a proxy server. Make the proxy settings only when you connect to the Internet via a proxy server that is on your internal network or provided by your provider, etc. Setting details Show : Display Last.fm item on the menu. Hide : Do not display Last.fm item on the menu. IP Control IP Address 192.168.000.001 Friendly Name Subnet Mask 255.255.255.000 Default Gateway 255.255.255.000 Primary DNS 000.000.000.
Make various other settings. Items that can be set with the “General” procedure Menu operation 1 2 Press SETUP. 3 Use ui to select the menu to be set or operated. 4 Press ENTER or p to enter the setting. Language (vpage 140) • To return to the previous item, press o or BACK. • Exiting the Menu, press SETUP while the menu is displayed. The menu display disappears. Auto Standby (vpage 141) Press MAIN to switch the zone mode to the MAIN ZONE. MAIN lights.
General Default settings are underlined. Set the language for display on the menu screen. Setting details English / Deutsch / Français / Italiano / Español / Nederlands / Svenska Rch Level Adjust the right channel output level. Channel Set the signal output from multi-zone. Volume Limit Make a setting for maximum volume. Power On Volume Define the volume setting that is active when the power is turned on. When HDMI ZONE2 function is used, these settings are not available.
General Auto Standby Change the display title of each zone to one you prefer. When you do not perform any operation on this unit with no audio or video input for a specified time, this unit automatically enters the standby mode. Before it enters the standby mode, “Auto Standby” is displayed on the display of this unit and the menu screen. Setting details MAIN ZONE / ZONE2 / ZONE3 • Up to 10 characters can be input. • For character input, see page 110. Default settings are underlined.
General Show information about receiver settings, input signals, etc. NOTE Examples of screen display This item is not compatible with the HDMI ZONE2 function. Items Setting details • Status display screen When the input source is switched. Sound Mode : The currently set surround mode. Input Signal : The input signal type. Format : The number of input signal channels (presence of front, surround, LFE). Sample Rate : The input signal’s sampling frequency.
General Default settings are underlined. Set whether or not to check for firmware update, update the firmware, and display update and upgrade notifications. Setting items Update Update the firmware of the receiver. In cases where it is not possible to connect to the network after doing a firmware update, connect to the network again using “Network” (vpage 135). Update : The notification message is displayed for about 20 seconds when the power is turned on.
General Add New Feature Display new features that can be downloaded to this unit and perform an upgrade. NOTE Upgrade Package : Display the items to be upgraded. Upgrade Status : Display a list of the additional functions provided by the upgrade. Upgrade : Execute the upgrade process. When the upgrade starts, the power indicator becomes red and the menu screen is shut down. During the upgrade, the amount of upgrade time which has elapsed is displayed.
By registering preset codes for external devices to the provided remote control, you can operate your TV and playback devices (such as Blu-ray Disc player and DVD player) with the remote control. Registering preset codes When preset codes are registered in the included remote control unit, it can then be used to operate any devices you have, such as DVD players or TVs made by different manufacturers.
Registering preset codes By default, the input source select buttons on the remote control perform only the input source select operation. To operate an external device with this remote control, set the preset code in “List of preset codes” (vpage 180) for the device you want to register to each input source select button. For how to set preset codes to buttons, see “Registering preset codes” (vpage 145).
Registering preset codes Button Default preset mode AVR Basic version Preset codes that can be registered to TV buttons Available change to preset TV group To perform menu operations of this unit, press AVR to have the remote control enter the AVR operation mode. Advanced version • When you press TV AUDIO that has a preset code registered to it, the “TV” indication on the remote control lights.
Operating external devices • The operation mode of the remote control unit is switched as shown in the table. When the FAVORITE STATION is pressed, the AVR-operation mode starts automatically.
Operating devices the input source select 1 Press button to which the preset code for the device you want to operate has been registered (vpage 148). • For details, refer to the device’s operating instructions.
Operating devices 6 7 3 2 0 – 9, +10 zzThis may power some devices on.
To prevent accidental misuse, you can set the zone for which the remote control unit is used. Press and hold any of the MAIN, 2 or 3 buttons and SETUP at the same time for three seconds or longer. The operation mode indicator flashes twice. MAIN When only using “MAIN ZONE” 2 When using “MAIN ZONE” / “ZONE2” 3 When using “MAIN ZONE” / “ZONE2” / “ZONE3” (Default) and hold MENU for at least 1 Press 3 seconds. The operation mode indicator flashes twice. 2 Press 9, 8 and 1, in that order.
Informations Here, we list various information related to this unit. Please refer to this information as needed.
Basic version Part names and functions Front panel For buttons not explained here, see the page indicated in parentheses ( ). i u t y r Advanced version Informations q w q Power operation button (X)···················································· (36) Turns power to this unit on and off (standby).
Front panel Basic version With the door open For buttons not explained here, see the page indicated in parentheses ( ). Q8 Q7 Q6 Q5 Q4 Q3 Q2 Q1 Q0 o Advanced version q When the headphones are plugged into this jack, audio will no longer be output from the connected speakers or from the PRE OUT connectors. NOTE To prevent hearing loss, do not raise the volume level excessively when using headphones.
Display Q1 Q0 o i u yt r w u MULTI ZONE indicators The input source name, sound mode, setting values and other information are displayed here. w Front speaker indicator Q1 Decoder indicator This lights up when ZONE2, ZONE3 (separate room) power is turned on (vpage 105). i Monitor output indicator This lights according to the setting of the front A and B speakers. Lights when audio signals are being output from the speakers.
Rear panel Q5 Q4 Q3 Q2 Q1 Q0 i o Basic version See the page indicated in parentheses ( ).
Remote control unit q Q4 q ZONE SELECT buttons Q5 w Operation mode indicators·············· (145, 151) e Device operation buttons (MAIN, 2, 3)·········································· (30, 105) (DEVICE X / MENU)·························· (145, 149) w Q6 Q7 r (1 – 4)···························································· (71) y Channel/page search buttons (CH/PAGE df) ·································· (41, 44, 55, 58, 62, 66, 68) u MUTE button (:)······························ (37, 105) i
Remote control unit Operating range of the remote control unit q Slide the rear lid in the direction of the arrow and remove it. Point the remote control unit at the remote sensor when operating it. w Load the two batteries properly as indicated by the marks in the battery compartment. Basic version Inserting the batteries R6/AA Approx. 7 m 30° e Put the rear cover back on. NOTE NOTE DVD 158 Informations • Insert the specified batteries in the remote control unit.
nn Trademark information (vpage 159) nn Surround (vpage 160) nn Relationship between video signals and monitor output (vpage 166) nn Explanation of terms (vpage 168) Trademark information This product uses the following technologies (Random order): Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued & pending.
Surround Basic version This unit is equipped with a digital signal processing circuit that lets you play program sources in the sound mode to achieve the same sense of presence as in a movie theater. Sound modes and surround parameters This table shows the speakers that can be used in each sound mode and the surround parameters adjustable in each sound mode. Symbols in the table S This indicates the audio output channels or surround parameters that can be set. D This indicates the audio output channels.
Surround Sound Mode (vpage 75) DIRECT/PURE DIRECT (2channel)z1 DIRECT/PURE DIRECT (Multi-channel)z1 DSD DIRECT (2 channel)z1 DSD DIRECT (Multi-channel)z1 S S S S S S S DVD Room Size (vpage 114) S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S Informations DOLBY DIGITAL DOLBY DIGITAL Plus DOLBY TrueHD DTS SURROUND DTS 96/24 DTS-HD DTS Express MULTI CH STEREO ROCK ARENA JAZZ CLUB MONO MOVIE VIDEO GAME MATRIX VIRTUAL S S S S S S S S S S S S S Effect Level (vpage 114) S S S
Surround Center Image (vpage 113) DIRECT/PURE DIRECT (2channel)z1 DIRECT/PURE DIRECT (Multi-channel)z1 DSD DIRECT (2 channel)z1 DSD DIRECT (Multi-channel)z1 z1 Subwoofer (vpage 115) Tone z19 (vpage 115) Sz5 Audyssey (vpage 116) MultEQ® XT z20 (vpage 116) Dynamic EQ z21 (vpage 117) Dynamic Volume z21 (vpage 117) Audyssey DSX® z20 (vpage 117) Restorer z22 (vpage 115) S S S S S S S S S S S S S S S S S S S Sz23 S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S
Surround Basic version nnTypes of input signals, and corresponding sound modes This table shows the input signal that can be played in each sound mode. Check the audio signal of the input source then select the sound mode. Symbols in the table F This indicates the default sound mode. S This indicates the selectable sound mode. Input signal types and formats PCM NOTE Sound Mode (vpage 75) PCM (2ch) DTS-HD Master Audio DTS EXPRESS DTS ES DSCRT (With Flag) DTS ES MTRX (With Flag) DOLBY DTS (5.
Surround NOTE Sound Mode (vpage 75) PCM (2ch) DTS-HD High Resolution Audio DTS EXPRESS DTS ES DSCRT (With Flag) DTS ES MTRX (With Flag) DOLBY DTS (5.1ch) DTS 96/24 DOLBY TrueHD DOLBY DIGITAL EX (With Flag) DOLBY DIGITAL EX (With no Flag) DOLBY DIGITAL (5.
Surround NOTE Sound Mode (vpage 75) MULTI CH IN MULTI CH IN MULTI CH IN + PLgx CINEMA MULTI CH IN + PLgx MUSIC MULTI CH IN + PLgz MULTI CH IN + Dolby EX MULTI CH IN 7.1 Audyssey DSX® DIRECT DIRECT PURE DIRECT PURE DIRECT DSP SIMULATION MULTI CH STEREO ROCK ARENA JAZZ CLUB MONO MOVIE VIDEO GAME MATRIX VIRTUAL STEREO STEREO ANALOG DTS-HD Master Audio DTS-HD High Resolution Audio DTS EXPRESS DTS ES DSCRT (With Flag) DTS ES MTRX (With Flag) DOLBY DTS (5.
Relationship between video signals and monitor output Video Conversion Output connector HDMI COMPONENT VIDEO HDMI On A A A A On A A S S
Relationship between video signals and monitor output When “Video Conversion” (vpage 121) is set to “On”, “i/p Scaler” (vpage 122) is set to “Analog”, “Analog & HDMI” or “HDMI” are set, the resolution of the input video signal can be converted to a different resolution for output (vpage 6 “Converting input video signals for output (Video conversion function)”). The relationship between the resolution of the convertible video signal and HDMI output resolution is shown in the table below.
Explanation of terms 168 Dolby Pro Logic g Dolby Pro Logic g is a matrix decoding technology developed by Dolby Laboratories. Regular music such as that on CDs is encoded into 5 channels to achieve an excellent surround effect. The surround channel signals are converted into stereo and full band signals (with a frequency response of 20 Hz to 20 kHz or greater) to create a “three-dimensional” sound image offering a rich sense of presence for all stereo sources.
Explanation of terms F FLAC FLAC stands for Free lossless Audio Codec, and is a lossless free audio file format. Lossless means that the audio is compressed without any loss in quality. The FLAC license is as shown below. Copyright (C) 2000,2001,2002,2003,2004,2005,200 6,2007,2008,2009 Josh Coalson 169 I iTunes iTunes is the name of the multimedia player provided by Apple Inc. It enables management and playback of multimedia contents including music and movies.
Explanation of terms DVD Z ZONE2 This unit can operate in a room other than the room where this unit is placed (MAIN ZONE) (ZONE2 playback). The room for ZONE2 playback is called ZONE2. ZONE3 This unit can operate in a room other than the room where this unit is placed (MAIN ZONE) (ZONE3 playback). The room for ZONE3 playback is called ZONE3. 170 Informations V vTuner This is a free online content server for Internet radio. Note that usage fees are included in upgrade costs.
If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase.
Symptom Cause/Solution Page When the HDMI ZONE2 function is used, no video or audio is output to TV in ZONE2. • Make sure that the power is on for ZONE2. • Check the input source for ZONE2. • Check the output settings (resolution/audio format) for the input device. 105 105 – When playing back the input device just to use the HDMI ZONE2 function, the TV used for MAIN ZONE is turned on. • “HDMI Control” in the menu is set to “On”.
Symptom Page • Check the subwoofer connections. “Restorer” cannot be selected. 85,86,87,88, 89, 90, 91 • Turn on the subwoofer’s power. – • Set “Speaker Config.” – “Subwoofer” on the menu to “Yes”. 130 • If “Front” and “Center” for “Speaker Config.” are set to “Large”, 130, 131 and “Subwoofer Mode” is set to “LFE”, no sound may be output from the subwoofers, depending on the input signal or selected sound mode. • Set “Decode Mode” on the menu to “Auto” or “DTS”.
GiPod / USB memory device / Internet radio / Media server / Last.fm / FlickrH Symptom Cause/Solution Page iPod cannot be played. • Some iPods do not support being used connected directly to the iPod/USB port. 21 The file names are not displayed properly (“...”, etc.). • Characters that cannot be displayed are used. This is not a malfunction. On this unit, characters that cannot be displayed are replaced with a “.” (period).
GRemote control unitH GAirPlayH Symptom 27 No sound. • The volume in iTunes or on the iPhone/iPod touch/iPad is set to the minimum setting. Adjust the volume to the optimum level. • This unit is not selected in the screen that is displayed when iTunes or the iPhone/iPod touch/iPad is started. Start iTunes or in switch on the iPhone/iPod touch/iPad, click the AirPlay icon the displayed screen, and select this unit. • AirPlay playback has not started.
Resetting the microprocessor X Basic version Perform this procedure if the display is abnormal or if operations cannot be performed. When the microprocessor is reset, all the settings are reset to their default values. INFO Advanced version BACK Informations 1 Turn off the power using X. 2 Press X while simultaneously pressing INFO and BACK. the display starts flashing at intervals of about 1 second, release the two 3 Once buttons.
nn Audio section nn Video section • Power amplifier Rated output: Dynamic power: 200 mV/47 kΩ 10 Hz – 100 kHz — +1, –3 dB (DIRECT mode) 102 dB (IHF–A weighted, DIRECT mode) 0.005 % (20 Hz – 20 kHz) (DIRECT mode) 1.2 V Rated output — 2 V (at 0 dB playback) Total harmonic distortion — 0.008 % (1 kHz, at 0 dB) S/N ratio — 102 dB Dynamic range — 100 dB Digital input: Format — Digital audio interface • Phono equalizer (PHONO input — MEDIA PLAYER OUT) Input sensitivity: 2.
Index vvC Bass·················································· 115, 131, 140 Bi-amp································································· 90 Brightness························································· 120 Browse mode················································ 39, 40 DVD 178 vvE Edit Name························································· 136 Effect Level······················································· 114 Enhancer···················································
vvL vvO vvQ On-screen Info·················································· 123 Operation Mode·················································· 40 Output Settings················································· 121 vvP Panorama·························································· 113 Parameter Check················································· 35 Picture Adjust···················································· 120 Picture View························································ 72 Play
List of preset codes D Denon B C 73347 CBL/SAT group (0zzzz) CBL M N O P R S T V W Z 00858 01376, 01877 01068 01376, 01877 01376, 01877 01376, 01877 01877, 00858, 02378 02015 01376, 01877 01376, 01877 01877 01976 01376, 01877 02174 01877 01376, 01877 01376, 00858, 02378 01060, 01068 01068 01060 01376, 01877, 01060, 01068 02174 01877 02174 01376 01877 01877, 01060, 02015, 02174 01877, 00858 01376 02015 01376, 01877 01068 02174 01376, 01877 02378 01877 01060, 01068 01376 01877 02015 DVD F I K M P S
V X Z N O P S T V Com Hem Foxtel Humax Kathrein Pace TechniSat D E F Amstrad Bell ExpressVu British Sky Broadcasting BskyB DirecTV Dish Network Dishpro Echostar Edision Expressvu Foxtel A B 01175 00775 01175 01175 01377, 00099 00775 00775 00775 01631 00775 01356 C DVD D E F G H I TV 01176 01356 01176 01561 01356 01195 SAT/PVR Combination A B 01631 01377, 01176, 01427, 01808 01334 00775 01561 01334 01631 01356 01334 01195 01175, 01356 00099 01377, 01175 01175 01631 01175, 01334 01631 01
M P S U V W BD/DVD group (3zzzz) 11037 11037 11423 11037 11037 11037 12170 11454, 10556 12051 11037 10818 12778 11864 11037 11037 10625 11524 11037 11037 11037 A B C D E 10625 10556 10556 10556 10556 10625 10556 10818 10556 10625 F G H VCR/PVR group (2zzzz) VCR D H P T DirecTV Humax Panasonic Philips TiVo 20739 20739 21378 20739 20739 I J K L M PVR D H P T DirecTV Humax Philips TiVo Philips 20739 20739 20739 20739 N O DVD 30539 30675 30675 30675 30539 30539 31571 30571 30503 Pioneer
Dimensions Basic version 236.8 378.8 54.8 340.0 167.0 18.5 152.0 47.0 15.0 60.0 47.0 Weight : 12.0 kg DVD 183 Informations 434.0 Advanced version 338.6 47.0 21.
V00 www.denon.com D&M Holdings Inc.
