Operating instructions

44
Basic Operation Basic Operation
Press the ON SCREEN button (in the AMP mode)
repeatedly until the “Tuner Preset Stations” screen
appears on the OSD.
1
Use the “Auto tuning” or “Manual tuning”
operation to tune in the station to be preset in the
memory.
Press the MEMORY button.
3
Press the CHANNEL button or NUMBER (1 to 8)
button to select the desired preset channel.
5
• To preset other channels, repeat steps 3 to 6.
A total of 56 broadcast stations can be preset — 8 stations
(channels 1 to 8) in each of blocks A to G.
Preset memory Checking the preset stations
Recalling preset stations
2
Press the TUNER button on
the remote control unit to
select the TUNER mode.
(Remote control unit)
4
Press the MEMORY BLOCK (A to G) button.
The memory block can also be selected by pressing the
SHIFT button.
6
Press the MEMORY button again.
• Store the station in the preset memory.
The preset (broadcast) stations can be checked on the on screen
display.
2 Recalling preset stations from the remote
control unit
1
2
Select the MEMORY BLOCK (A to G).
Watching the display, press the CHANNEL
button or NUMBER (1 to 8) button to select the
desired preset channel.
2 Recalling preset stations from the main unit’s
panel
1
2
Press the TUNING PRESET button.
Turn the FUNCTION knob and select the desired
preset channel.