Graphical User Interface Use this manual in combination with the operating guide displayed on the GUI screen. GUI Menu Operation (vpage 23) GUI Menu Map (vpage 24) AV SURROUND RECEIVER AVR-3808CI Owner’s Manual AVR3808CIEU.
SAFETY INSTRUCTIONS n SAFETY PRECAUTIONS 1. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
FCC INFORMATION (For US customers) n NOTE ON USE / OBSERVATIONS RELATIVES A L’UTILISATION 1. COMPLIANCE INFORMATION Product Name: AV Surround Receiver Model Number: AVR-3808CI This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation.
Contents Getting Started Accessories·······················································································2 Cautions on Handling······································································3 Cautions on Installation··································································3 About the Remote Control Unit·····················································3 Inserting the Batteries·····································································3 Operating Range of the Re
Thank you for purchasing this DENON product. To ensure proper operation, please read these owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference. Setup Accessories Playback Check that the following parts are supplied with the product. q Owner’s manual....................................................................... 1 w Warranty (for North America model only)................................. 1 e Service station list........................
Getting Started Cautions on Handling About the Remote Control Unit • Before turning the power switch on Check once again that all connections are correct and that there are no problems with the connection cables. Connections • Power is supplied to some of the circuitry even when the unit is set to the standby mode. When traveling or leaving home for long periods of time, be sure to unplug the power cord from the power outlet.
For buttons not explained here, see the page indicated in parentheses ( ).
Getting Started Rear Panel Q5 Q6 Q4 Q3 Q2 Q1 Q0 o Connections Setup Playback Remote Control Q7 Q8 Q9 Q8 Q7 W0 Multi-Zone Information Troubleshooting q w e r q RS-232C connector······································ (21) w REMOTE CONTROL jacks··························· (21) e TRIGGER OUT jacks···································· (21) r FM/AM antenna terminals (TUNER ANTENNA)····································· (19) t DOCK CONTROL jack·································· (13) y Speaker t
n Main remote control unit (RC-1068) Q5 r Q8 Q9 W0 W1 W2 W3 Q1 W4 Q2 W5 W6 Q4 W7 ENTER button········································ (23, 56) W4 Return button (RTN)···································· (23) W5 Master volume control buttons (VOL)······· (46) W6 Muting button (MUTE)·························· (46, 71) W7 Main remote control unit setup button (ZONE ON / ZONE OFF)······························ (71) Q4 Master volume control buttons (VOLUME)·············································
Getting Started Preparations Connections Connections Setup Connections for all compatible audio and video signal formats are described in these operating instructions. Please select the types of connections suited for the equipment you are connecting. With some types of connections, certain settings must be made on the AVR-3808CI. For details, refer to the instructions for the respective connection items below. Cables Used for Connections Select the cables according to the equipment being connected.
GFlow of video signals inside the AVR-3808CIH Component video connectors S-Video connector S-Video connector Video connector Video connector Video inputs Video outputs Monitor Information Component video connectors Multi-Zone HDMI connector Remote Control HDMI connector Playback High picture quality playback NOTE • HDMI signals cannot be converted into analog signals. • 1080p component input video signals cannot be output to anything other than component video connectors.
Getting Started Speaker Connections Speaker Connections Example: 5.1-channels (Surround A+B) and ZONE2 use Speaker Installation Front speakers Center speaker Subwoofer Connections The illustration below shows a basic example of installation of the amplifier combined with 8 speakers and a monitor.
Carefully check the left (L) and right (R) channels and + (red) and – (black) polarities on the speakers being connected to the AVR-3808CI, and be sure to interconnect the channels and polarities correctly. Insert the speaker cable’s core wire to the hilt into the speaker terminal. Remote Control Turn the speaker terminal counterclockwise to loosen it. Playback 2 3 4 Setup Peel off about 0.
Getting Started Connecting Equipment with HDMI connectors NOTE With HDMI connections, the video and audio signals can be transferred with a single cable. Monitor )%.* 065 )%.* */ Connections DVD player b The AVR-3808CI is equipped for HDMI version 1.3a. This version is compatible with other versions, allowing connection to all components equipped with an HDMI connector. b The AVR-3808CI is compatible with 30- and 36-bit Deep Color.
Connecting the Playback Components • Connect the cables to be used (vpage 8 “Video Conversion Function”). • With HDMI connections, the video and audio signals can be transferred with a single cable. • To output the audio signals to the monitor with HDMI connections, set GUI menu “Manual Setup” – “HDMI Setup” – “Audio” to “TV” (vpage 30). 7*%&0 )%.* */ 7*%&0 */ 4 7*%&0 */ $0.
Getting Started Record Player CD Player Turntable (MM cartridge) iPod® Connect the cables to be used. CD player "6%*0 $0"9*"065 Connections "6%*0 065 3 Use a DENON Control Dock for iPod (ASD-1R, sold separately) to connect the iPod to the AVR-3808CI. For instructions on the Control Dock for iPod settings, refer to the Control Dock for iPod’s operating instructions.
Satellite Receiver Connect the cables to be used. Connect the cables to be used. TV tuner DBS / BS tuner 7*%&0 4 7*%&0 065 $0.10/&/5 7*%&0 065 : 1# 13 "6%*0 "6%*0 065 3 $0"9*"065 7*%&0 7*%&0 065 4 7*%&0 065 $0.
Getting Started Connecting the Recording Components Carefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnect correctly. Video Cassette Recorder Connect the cables to be used. Video cassette recorder 7*%&0 Connections Digital Video Recorder "6%*0 4 7*%&0 */ 065 7*%&0 065 */ "6%*0 */ - Connect the cables to be used.
Make analog connections if you wish to record analog audio signals, or digital connections if you wish to record digital audio signals, depending on the types of connectors on the components being used. CD recorder / MD recorder / Tape deck Multi-channel playback is possible with DVD-Audio discs, Super Audio CDs, etc. 015*$"*/ - 065 Connections "6%*0 Carefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnect correctly.
Getting Started Video Camera / Game Console Video camera / Game console 7*%&0 4 7*%&0 065 "6%*0 7*%&0 065 Connections "6%*0 065 3 015*$"065 Component with Multi-channel Output connectors DVD player / Super Audio CD player / External decoder '30/5 - R L R Setup L L Playback L 3 R R $&/5&3 Power amplifier "6%*0 46# 800'&3 '30/5 - "6%*0 46# 800'&3 External Power Amplifier 463306/% - L L 3 R R 3 $&/5&3 463306/% - 3 463306/% #"$, - 3 463306/% #"$, - L L 3 L R L R L R
n Front panel XM connector n Rear panel USB memory device USB memory device Connections Setup Playback • The AVR-3808CI is an XM Ready® receiver. You can receive XM® Satellite Radio by connecting to the XM Mini-Tuner and Home Dock (includes home antenna, sold separately) and subscribing to the XM service. • Plug the XM Mini-Tuner and Home Dock into the XM connector on the rear panel. • Position the Home Dock antenna near a south-facing window to receive the best signal.
Getting Started Antenna terminals An F-type FM antenna cable plug can be connected directly. Direction of broadcasting station Connections AM loop antenna (supplied) FM antenna Setup 75 Ω/ohms Coaxial cable Playback Remote Control FM indoor antenna (supplied) Multi-Zone Information Ground AM outdoor antenna Connection of AM antennas AM loop antenna assembly Troubleshooting Connect to the AM antenna terminals. Remove the vinyl tie and take out the connection line. a.
Computer Modem n Router To LAN port LAN port/ Ethernet connector n Computer Information Troubleshooting A computer with the following specifications is required to use a music server: • OS Windows® XP Service Pack2, Windows Vista • Software (Prepare one of the following.) · .NET Framework 1.1 and Windows Media Connect (Windows XP) · Windows Media Player ver.11 · DLNA-compatible server software • Internet browser Microsoft Internet Explorer 5.
Getting Started Multi Zone External Controller ZONE2 or ZONE3 Pre-out Connections Connections • If another power amplifier or pre-main (integrated) amplifier is connected, the ZONE2 or ZONE3 pre-out (variable or fixed level) connectors can be used to play a different program source in ZONE2 or ZONE3 the same time (vpage 68 ~ 71). • When using an S-Video cable or a video cable for connection between the AVR-3808CI and an input device, connect to the video connectors.
Getting Started Connecting the Power Cord Wait until all connections have been completed before connecting the power cord. Connections Power cord (included) To household power outlet (AC 120 V, 60 Hz) Setup Connection to the AC outlets Playback • These outlets supply power to external audio devices. • The power supplied from these outlets turns on and off together with the set’s power switch. • Audio equipment with a total power consumption of 120 W (1 A) can be connected.
Getting Started Examples of GUI Screen Displays GUI Menu Operations Connections With the AVR-3808CI, settings and operations for most functions can be performed by operating while looking at the GUI menus displayed on the monitor screen. Some typical examples are described below. Example: Browse Menu (Top Menu) n Icon Switch the selected item SOURCE SELECT Setup The GUI cannot be superimposed when xvYCC signals and component 1080p signal, computer’s resolution (e.g.VGA) are input.
Information (vpage 44, 45) Source Select (vpage 36 ~ 40) (vpage 41 ~ 44) Surround Mode (vpage 40, 41) n XM • Play • Preset Skip • Antenna Aiming • Input Mode • Rename • Other · Video Select · Source Level Auto Setup (vpage 25 ~ 27) n Auto Setup • STEP1: Speaker Detect • STEP2: Measurements • STEP3: Calculation • STEP4: Check • STEP5: Store n Option • Room EQ • Direct Mode • Mic Select n Parameter • Speaker Configuration Check • Distance Check • Channel Level Check • Crossover Check • EQ Check • Res
Getting Started Preparations 1 MIC Connect the included setup microphone to the SETUP jack on the main unit. Auto Setup The auto setup screen appears automatically. Connections Setup Playback Remote Control • This procedure lets you measure the acoustic properties of your speakers and listening room and make the optimum settings automatically.
Optimize settings for speakers in use. The speaker system to be measured can be selected ahead of time here. [Selectable items] F Menu tree F 7.1 (B) 7.1 5.1 a Auto Setup s Option “Amp Assign” is initially set to “ZONE2”, so “7.1 (B)” and “7.1” cannot be selected. To use “7.1 (B)” or “7.1”, change the “Amp Assign” setting (vpage 68 ~ 70). d Parameter The settings are performed automatically. Amp Assign Advanced setting : changes power amplifier assignment.
Getting Started Error Messages s Option If the auto setup procedure could not be completed due to speaker installation, the measuring environment, etc., an error message is displayed. If this happens, check the relevant items, be sure to take the necessary measures, then perform the auto setup procedure over again. Select settings for room EQ, mic, etc.
Subwoofer [Selectable items] Manual Setup Select low range signal to be reproduced by subwoofer. Yes No Small • This can be set when GUI menu “Speaker Configuration” – “Subwoofer” is set to “Yes”. • Play music or a movie source and select the mode offering the strongest bass. • Select “LFE+Main” if you want the bass signals to always be produced from the subwoofer. None Surround B Select surround speakers B use and size.
Getting Started Default f Channel Level Adjust channel levels to obtain equal volume from all speakers. Connections Mode Auto Manual Setup Select surround speaker from which test tone is output. Playback A B A+B Remote Control Start Output test tone. [Variable range] –12dB ~ g Crossover Frequency [Selectable items] [Selectable items] Surround [Selectable items] Select surround speakers to use for each surround mode.
Make settings for HDMI video/audio output. d Progressive Mode k Audio Select optimum progressive mode for video material. Select HDMI audio output device. [Selectable items] F Menu tree F Auto Video1 Video2 [Selectable items] Amp Getting Started HDMI Setup TV HDMI Setup This can be set when “i/p Scaler” is set to anything other than “OFF”. a i/p Scaler d Progressive Mode This sets the aspect ratio when outputting 480i/576i or 480p/576p input signals from the HDMI output connector.
Getting Started s 2ch Direct/Stereo d Downmix Option g Manual EQ Make speaker settings for 2-channel mode playback. Set dynamic range for downmix playback of Dolby Digital sources. Adjust tonal quality for each speaker using graphic equalizer. Setting Connections [Selectable items] To change the settings, select “Custom”. z Basic [Selectable items] Setup • Set this to “ON” if the sound from the front speakers seems distorted.
s Other Make settings for LAN. Make setting for amp power save mode and computer language environment. Turn on the AVR-3808CI’s power. Connections Power Saving Make setting for power saving when not connected to network. [Selectable items] To enter the IP address manually OFF Character Setup To acquire the IP address automatically using the DHCP function ON Set the character code type of the MP3 ID3-Tag played by USB.
Getting Started Rch Level Zone Setup Make settings for audio playback in a multizone system. F Menu tree F Option Setup Adjust the right channel output level. [Variable range] –12dB ~ 0dB ~ +12dB F Menu tree F Connections Channel Manual Setup Make various other settings. Manual Setup Option Setup Switch between stereo and mono output.
f GUI Set the main zone volume setting. Make GUI related settings. Text information display. [Selectable items] Screensaver Make a setting for maximum volume. Make screensaver settings. Use the screensaver to prevent burn-in on the monitor screen. When set to “ON”, the screensaver is activated if there is no activity for about 3 minutes.
Getting Started Connections h Trigger Out 1 k Remote ID A1 Setup Lock Select the conditions to turn on the trigger out 1 with respect to the zone, input source, surround mode, HDMI monitor, etc. For details about the trigger out function, see page 21. Set remote control ID. Match the ID setting of the remote control unit and the receiver. Protect settings from inadvertent change.
Update the firmware of the receiver. [Selectable items] Source Select Manual Setup q Press and hold the STATUS and RETURN buttons for at least 3 seconds. “Video Format” appears on the display. w Use the ui button to set “GUI Language”. e Use the o p button to make the setting. r Press the ENTER, MENU or RETURN button to complete the setting. F Menu tree F Source Select TUNER PHONO CD DVD HDP TV/CBL SAT VCR DVR V.
Getting Started f Preset Name Source Select To operate the AVR-3808CI using the main remote control unit, set the remote control unit to the AMP mode (vpage 59 “Remote Control Unit Operations”). Assign name to a preset memory. Names containing up to 8 characters can be input.
Press the INPUT MODE button on the main unit or the INPUT button on the main remote control unit. HDMI EXT. IN Digital Analog Set the decode mode for this source. CD DVD HDP DVR [Selectable items] Auto TV/CBL SAT VCR V.AUX PCM DTS Video Select Repeat Switch video input source while listening to audio signal. Make settings for repeat mode. [Selectable items] [Input source] DVD HDP TV/CBL SAT VCR DVR V.
Getting Started l Assign Assign input sources to input connectors. Digital iPod dock Select digital input connector to assign to this source. Assign Control Dock for iPod to this source. [Input source] HDMI VCR Connections Select HDMI connector to assign to this source. DVD HDP [Input source] Setup [Selectable items] Playback Input source Default setting TV/CBL DVR V.AUX 1 3 2 CD DVD HDP SAT VCR [Selectable items] DVR TV/CBL SAT [Input source] V.
Select the “Cinema”, “Music”, “Game” and “Pro Logic” modes at GUI menu “Parameter” – “Audio” – “Surround Parameters” – “Mode” (vpage 41). Adjust the XM radio reception sensitivity. [Input source] XM Surround Modes Standard Playback Terrestrial This is the standard mode for enjoying surround sound according to the program source. Indicate terrestrial signal strength.
Getting Started DSP Simulation Playback Connections The desired mode according to the program source and viewing situation can be selected from among 10 DENON original surround modes. The surround parameters can be adjusted (vpage 77, 78) to achieve an even more realistic, powerful sound field. [Selectable items] Setup 7CH STEREO Playback Remote Control Multi-Zone Information : This mode is for enjoying stereo sound from all speakers.
Soften the treble understanding. range of movie [Selectable items] ON OFF soundtracks for better AFDM Shift sound image center to front or rear, to adjust playback balance. Auto-select surround mode by source. This function only works for software containing a special identification signal. If the software being played is recorded in Dolby Digital EX or DTS-ES, it is played in 6.1-channels. If not, it is played in 5.1-channels.
Getting Started Subwoofer Att. Attenuate subwoofer level when using EXT. IN mode. [Selectable items] ON OFF Connections Set this to “ON” if the subwoofer channel level seems too high when playing Super Audio CDs. Subwoofer Setup Sets whether or not to output subwoofer signals when in the DIRECT or STEREO mode. Playback [Selectable items] Remote Control Resets the settings to the default values. ON OFF d Room EQ f RESTORER Select room equalizer for current environment.
g Night Mode [Selectable items] OFF Low Middle Adjust the picture quality. High Low Parameter Picture Adjust Middle s Brightness Shows information about current settings. f Hue Information Status Delay audio. This sets the delay time for audio signals. q Press the AUDIO DELAY button on the main unit or the A. DL button on the main remote control unit. w Use the o p button to set. 0 ~ 6 a MAIN ZONE s Brightness Shows information about settings for main zone.
Getting Started Audio Input Signal HDMI Information Quick Select Shows information about audio input signals. Shows information about HDMI input/output signals and monitor. Shows information about quick select settings. F Menu tree F F Menu tree F F Menu tree F Connections Information Information Audio Input Signal Information HDMI Information [Items to be checked] Quick Select a Signal Information 1 s Monitor 2 Setup 3 Surround Mode : The currently set surround mode is displayed.
SOURCE SELECT MASTER VOLME Playback Turning the Power On The power indicator flashes green and the power turns on. To operate the AVR-3808CI using the main remote control unit, set the remote control unit to the AMP mode (vpage 59 “Remote Control Unit Operations”). MASTER VOLUME SOURCE SELECT NOTE Power continues to be supplied to some of the circuitry even when the power is in the standby mode.
Getting Started Listening to FM/AM Broadcasts Presetting Radio Stations (Preset Memory) Basic Operation Your favorite broadcast stations can be preset so that you can tune them in easily. Up to 56 stations can be preset. Connections 1 Either turn or press [TUNER] (AMP mode) to select “TUNER”.
Operation on the Main Unit Operation on the Main Remote Control Unit Press [A ~ G] to select the memory block. Auto tuner presets 520 / 600 / 1000 / 1400 / 1500 / 1710 kHz, 90.1 / 90.1 MHz C1 ~ C8 90.1 MHz D1 ~ D8 90.1 MHz E1 ~ E8 90.1 MHz F1 ~ F8 90.1 MHz G1 ~ G8 90.1 MHz Once you have installed the XM Mini-Tuner Dock, inserted the XM Mini-Tuner, connected the XM Dock to your XM Ready® home audio system, and installed the antenna, you are ready to subscribe and begin receiving XM programming.
Getting Started uiop Checking the XM Signal Strength and Radio ID Connections 1 2 Setup Playback [ ENTER TU] [ iPod] Remote Control (DEVICE2 mode) Multi-Zone Information [8], [9], [6], [7], [1], [2] [ENTER] [uiop] [SEARCH] [CHANNEL +/–] [f] ENTER uiop [SEARCH] [SAT TU] (AMP mode) Either turn or press [SAT TU] (AMP mode) to select “XM”. Press until “SIGNAL” appears on the display.
iPod® Playback q Set the iPod in the DENON Control Dock for iPod. (vSee the Control Dock for iPod’s operating instructions.) w Assign the Control Dock for iPod’s input. Either turn or press [iPod] (AMP mode) to select the input source assigned in step 1-w above. Press ENTER. Playback starts. Stopping playback temporarily During playback, press ENTER or [1]. Press again to resume playback.
Getting Started Playing Network Audio or USB Memory Devices This procedure can be used to play Internet radio stations or music files stored on a computer or USB memory device. Connections n About the Internet radio function Setup Playback Remote Control Multi-Zone • Internet radio refers to radio broadcasts distributed over the Internet. Internet radio stations from around the world can be tuned in.
1 uiop Make the necessary preparations. 3 NET/DTU] (DEVICE1 mode) To operate using the main remote control unit, set the remote control unit to the NET/DTU (DEVICE 1) mode. (vpage 59 “Remote Control Unit Operations”) uiop [SEARCH] Playback starts. Stopping playback temporarily To stop During the play or pause mode, press and hold ENTER. [NET/USB] (AMP mode) Searching up or down pages Press [SEARCH], then press o (down) or p (up). To cancel, press ui or [SEARCH].
Recently Played Internet Radio Stations Getting Started uiop Recently played internet radio stations can be selected from “Recently Played” in top menu. Connections 1 2 Use ui to select “Recently Played”, then press ENTER or p. Use ui to select the item you want to play, then press ENTER or p. Setup NOTE ENTER Up to 20 stations stored in “Recently Played”.
Use this procedure to play music files or playlists. 2 ENTERui Use to select the search item or folder, then press or p. 1 Use ui to select the file, then press ENTER or p. Playback starts once buffering reaches “100%”. During playback, either press u (previous track) or i (next track). • Set the USB port to be used. : “Source Select” – “NET/USB” – “Playback Mode” – “USB Select” (vpage 39) Press [RANDOM] on the sub remote control unit.
Getting Started Surround mode INPUT MODE Operating the AVR-3808CI Browser (Web control) Using a This function lets you operate the AVR-3808CI using Internet Explorer. Connections Setup Playback uiop CH SELECT 1 Check the AVR-3808CI’s IP address. 2 Input the AVR-3808CI’s IP address in Internet Explorer. : “Manual Setup” – “Network Setup” – “Network Information” (vpage 32) The AVR-3808CI can be operated in the same way as with regular Internet browsing.
You can listen to one program source while recording a different program source. Press . “ZONE2 SOURCE” is shown on the display. ZONE2 SOURCE ···· ZONE2 XM RECOUT NET/USB ···· RECOUT SOURCE For operating instructions, refer to the respective equipment’s operating instructions. To record FM or AM broadcasts, select the broadcast (vpage 47). For operating instructions, refer to the respective equipment’s operating instructions.
Getting Started Connections Setup Playback QUICK SELECT Remote Control Multi-Zone QUICK SELECT Quick Select Function Personal Memory Plus Function With this function, the currently playing input source, input mode, surround mode, room EQ settings and volume can be stored in the memory. This function sets the settings (input mode, surround mode, etc.) last selected for the individual input sources.
Remote Lock Mode The buttons on the main unit can be locked if not using them. This setting can be made so that the remote control unit cannot operate the AVR-3808CI, for example when not using it, etc. Locking Operation of All the Main Unit Buttons Turn off the power using . Press while simultaneously pressing and . while simultaneously pressing . “Remote Lock” appears on the display. To cancel, perform the same operation as above.
Getting Started Operating DENON Audio Components Remote Control Unit Operations 1 Connections Setup Playback Remote Control [ AMP] The indicator for the component to be operated flashes. : AMP / ZONE2 / ZONE3 / ZONE4z / SYSTEM CALL Main Remote Control Unit • On the main remote control unit, the display switches according to the device being operated and the mode. • In modes other than iPod, the mode switches between “DEVICE1” and “DEVICE2” each time the [MODE SELECTOR] is pressed.
Getting Started Functions of Buttons by Component EL Display EL Display DEVICE 2 iPod DEVICE 1 CD Recorder VCR TAPE iPod Playback Auto search (cue) Manual search (fast-reverse/ fast-forward) CD (Default setting) Playback Auto search (cue) Manual search (fast-reverse/ fast-forward) Playback Auto search (cue) Manual search (fast-reverse/ fast-forward) Playback Auto search (cue) Manual search (fast-reverse/ fast-forward) Playback Auto search (cue) Manual search (fast-reverse/ fast-forward) Playbac
Getting Started EL Display EL Display Connections [1], [8 9], [6 7], [3], [2], [SOURCE ON], [SOURCE OFF] Setup [MENU] Playback [SETUP] [ENTER] [uiop] [DISPLAY] Remote Control [CH +/–] [0 ~ 9, +10] [TV/VCR] Multi-Zone Buttons Information Troubleshooting [A ~ G], [d f], [BAND], [MODE], [MEMO] [ENTER] [uiop] [SEARCH] [CH +/–] [0 ~ 9] Buttons MENU u i o p ENTER SETUP DISPLAY CH + / – 0 ~ 9, +10 TV/VCR Special Remarks TV Satellite Receiver / Cable TV DEVICE 1 DEVICE 2 SAT SAT DEVICE 1 TV (HITA
TUNER AMP (MAIN) Remote ID NET/DTU DEVICE1 (Net Audio / USB) DEVICE1 (Analog TUNER) DEVICE2 (XM) iPod 52863 52864 72815 62865 81001 2 82001 52795 52812 72816 62837 3 83001 52800 52813 72817 62838 4 84001 52805 52814 72818 62839 Point the main remote control units directly at each other and press and hold the button on the other device’s remote control unit that you want to learn.
Getting Started Signal transmission indicator Registering [ Connections AMP] [MODE SELECTOR] [SYSTEM CALL] Setup Playback [POWER ON] [8], [9], [6], [7], [1], [3], [2] Remote Control [CHANNEL +/–] [NUMBER] Multi-Zone [RC SETUP] Information System Call Function Troubleshooting This function lets you register a series of operations at a single button.
The display’s brightness can be adjusted in 5 steps. (Default: Step 3) Press [CHANNEL +] or [CHANNEL –]. The display gets one step brighter when [+] is pressed. The display gets one step darker when [–] is pressed. GResetting button by buttonH Press and hold in [RC SETUP] for at least 3 seconds. The signal transmission indicator flashes twice. The signal transmission indicator flashes twice. Press the button you want to reset twice.
Getting Started Sub Remote Control Unit Operations Connections Setup Playback Remote Control • The sub remote control unit is equipped with frequently used buttons, so it can be used for simple remote control unit operations. • The sub remote control unit can also be used for multizone, so you can use it to control the AVR-3808CI from other rooms. • The operations listed below can be performed with the sub remote control unit.
– File operations – Stop Play/pause 1-track/All-track repeat play (USB) 1-track random play (USB) b2 Stop Play/pause 1-track/All-track repeat play 1-track/album shuffle play b2 b3 b3 b4 b4 Information Track search Multi-Zone Track search Remote Control RETURN 8 9, TUNING d f 2 1/3 REPEAT RANDOM USB ALL MUSIC * (Music server only) FAVORITES * Page forward screen / Character search Adjustment of volume (b1) Muting (b1) Selected zone menu File operations – File operations – Page forward screen
Getting Started Multi-zone indicator [ZONE SELECT] [ADVANCED SETUP] [ZONE OFF] Connections Setup Playback [MENU] We recommend always using the sub remote control unit for the same room. When this is done, the unit can be set so that the zone does not switch when buttons are operated. Remote Control 1 2 Use the tip of a pen to press [ADVANCED SETUP]. 3 Use the tip of a pen to press [ADVANCED SETUP]. All the multi-zone indicators light. Select the multi-zone to be set.
Amp Assign / Multi Zone Connections and Operations A A B B Stereo Z2L + Z2R Z2 + Mono + + Z3L Amp Assign mode: Z3R ZONE2 (Default) Z3L Z3R ZONE3 Stereo Z3 + ZONE MONO Mono • “STEREO” or “MONO” depends on the setting at GUI menu “Manual Setup” – “Zone Setup” – “Channel” (vpage 33). • Both A and B can be installed for SR and SL.
Getting Started Setting 2 : F 7.1-channel Setting 3 : With this setting it is possible to switch between the following two playback modes. playback F 5.1-channel playback F 2-channel playback Switching·················Surround Mode switching Main zone FL SW C FR Connections Main zone FL SW 7.1ch SL Main zone Setup A B B SBR Playback Remote Control Speaker terminal Amp Assign mode C FR Surround Mode 5.1ch SL Both A and B can be installed for SR and SL.
F Making bi-amp connections for the FL and FR channels in the main zone and conducting 5.1-channel playback (switching with other modes not possible) FL SW A 5.1ch FL/FR Bi-Amp B FR Connectors for audio output Audio signals Connectors for video output ZONE2 ZONE2 PRE OUT Stereo ZONE2 VIDEO OUT ZONE3 ZONE3 PRE OUT Stereo – Amp Assign mode: SR Bi-Amp A Main zone (7.
Getting Started Multi-Zone Operations Turning the Power On and Off Connections GOperation on the main unitH Press , for the zone to be operated. When the power turns on, the multi-zone indicator lights on the display. GOperation on the main remote control unitH Setup q Press [AMP] and select the zone mode to be operated. w Press [Z2 ON] (ZONE2 mode), [OFF] or [ON] (ZONE3 mode).
We recommend installing the speakers for the surround “L” and “R” channels a bit forward. Path of the surround sound from the speakers to the listening position We recommend using 2 speakers. When using dipolar speakers in particular, be sure to use 2 speakers. Other Information About Speaker Installation Surround back speakers 48 $ '3 Below we introduce examples of speaker layouts. Refer to these to arrange your speakers according to their type and how you want to use them.
Getting Started G2H When not using surround back speakers Front speakers Center speaker Dolby TrueHD is a high definition audio technology developed by Dolby Laboratories, using lossless coding technology to faithfully reproduce the sound of the studio master. This format is compatible with a maximum sampling frequency of 96 kHz and up to 7.1-channels, so it is used for applications particularly prioritizing sound quality.
DTS 96/24 is a digital audio format enabling high sound quality playback in 5.1-channels with a sampling frequency of 96 kHz and 24 bit quantization on DVD-Video. Information HDCD® is an encoding/decoding technology that greatly reduces the distortion that occurs upon digital recording while maintaining compatibility with the conventional CD format, thus expanding the dynamic range and achieving a high resolution.
Getting Started HDMI (High-Definition Multimedia Interface) Connections Setup HDMI is a digital interface standard for next generation TVs based on DVI (Digital Visual Interface) standards and optimized for use in consumer equipment. Non-compressed digital video and multi-channel audio signals are transmitted with a single connection.
Surround Mode Mode Room Size Effect Level Delay Time Subwoofer PRO LOGIC g/gx MUSIC mode only Panorama Dimension Center Width NEO:6 MUSIC mode only EXT. IN only Tone Night Mode Room EQ RESTORER Center Image Subwoofer Att.
Getting Started Differences in Surround Mode Names Depending on the Input Signals Input signals Button Connections Surround Mode Note WMA (Windows LINEAR Media Audio) ANALOG PCM / / MP3 / WAV MPEG-4 AAC / FLAC DTS DTS ES DSCRT (With Flag) DOLBY DIGITAL DTS ES MTRX (With Flag) DTS (5.1ch) DTS 96/24 DOLBY DIGITAL EX (With Flag) DVD-AUDIO DOLBY DOLBY DOLBY DOLBY DVDDIGITAL EX DIGITAL DIGITAL DIGITAL Audio (With no (5.
Surround Mode Note DTS DOLBY DIGITAL DTS ES DSCRT (With Flag) DTS ES MTRX (With Flag) DTS (5.1ch) DTS 96/24 DOLBY DIGITAL EX (With Flag) DVD-AUDIO DOLBY DOLBY DOLBY DOLBY DIGITAL EX DIGITAL DIGITAL DIGITAL (With no (5.
Getting Started About Networks Windows Media Player ver.11 Connections This is a media player distributed free of charge by Microsoft Corporation. It can be used to play playlists created with Windows Media Player ver. 11 as well as files in such formats as WMA, DRM WMA, MP3 and WAV. Setup Playback vTuner Remote Control This is a free online contents server for Internet radio. Note that usage fees are included in upgrade costs. For inquiries about this service, visit the vTuner site below.
n Main zone Video Convert b b b b b b b b b b b b b b Monitor output COMPONENT S-VIDEO VIDEOz1 S-VIDEOz1 S-VIDEOz1 COMPONENT COMPONENTz1 COMPONENTz1 COMPONENT COMPONENTz1 COMPONENTz1 COMPONENT COMPONENTz1 COMPONENTz1 COMPONENT COMPONENTz1 COMPONENTz1 VIDEOz1 z4 S-VIDEOz1 S-VIDEOz1 A A COMPONENTz1 VIDEOz1 z4 A COMPONENTz1 S-VIDEOz1 S-VIDEO COMPONENTz1 S-VIDEOz1 S-VIDEO COMPONENTz1 VIDEOz1 z4 S-VIDEOz1 S-VIDEOz1 A A COMPONENTz1 VIDEO z4 VIDEO COMPONENTz1 S-VIDEO S-VIDEO COMPONENTz1 S-VIDEO S-VIDEO COMPON
Getting Started Video Convert SIGNAL IN MONITOR OUT (Normally) MONITOR OUT (when GUI menu displayed) COMPONENT S-VIDEO VIDEO HDMI COMPONENT S-VIDEO VIDEO HDMI COMPONENT S-VIDEO VIDEO A A A A A A A A S S S S A A A S A A A S (VIDEO) S S S S A A S A A A S (S-VIDEO) A S S S S A A S S A A S (S-VIDEO) S (VIDEO) S S S S A S A A A S (COMPONENT) A A S S S S A S A S A S (COMPONENT) A S (VIDEO) S S S S A S S A A S (COMPONENT)
Troubleshooting Page 22 10 – GRemote Control UnitH 9 46 • Insert the batteries in the proper direction, following the polarity marks in the battery compartment. • Move the set to a place in which the remote control sensor will not be exposed to strong light. 3 • Release the remote lock mode. 58 3 3 Troubleshooting 39 Page 3 3 Information 46 46 39 Countermeasure • Replace with new batteries. • Operate within the specified range. • Remove the obstacle.
Getting Started GAudioH Connections Setup Symptom No sound is produced from center speaker. No sound is produced from surround speakers. No sound is produced from surround back speaker. Playback Remote Control No sound is produced from subwoofer. Cause Countermeasure • Monaural source (monitor, AM • The mode is set to something station, etc.) being played in other than “STANDARD”. STANDARD mode. • The surround mode is set to • Set to a surround playback “STEREO”, “DIRECT” or “PURE mode. DIRECT”.
Symptom iPod cannot be played. Cause Countermeasure 39 13 – GNET/USBH 39 – – – 51 – 32 51 51 – – – – 32 – – – Troubleshooting 51 52 Information – – Multi-Zone The file names are not displayed properly (“...”, etc.). • Files are stored in a noncompatible format. • You are attempting to play a file that is copyright protected. • Characters that cannot be displayed are used. – 51 Remote Control • USB memory device is divided into multiple partitions.
Getting Started GXM Satellite RadioH Connections Setup Playback Symptom ”CHECK ANTENNA” is displayed in the XM mode. ”NO SIGNAL” is displayed in the XM mode. ”OFF AIR” is displayed in the XM mode. Receiving only XM channels 0 and 1. Cause Countermeasure • AVR-3808CI’s XM connector and • Check that the connections are the XM Mini-Tuner and Home correct. Dock is not properly connected. • The signal cannot be received. • Reposition your XM Mini-Tuner and Home Dock antenna.
Getting Started Specifications Y (brightness) signal — 1 Vp-p, 75 Ω/ohms PB / CB signal — 0.7 Vp-p, 75 Ω/ohms PR / CR signal — 0.7 Vp-p, 75 Ω/ohms 5 Hz ~ 100 MHz — +0, –3 dB (when video convert set to “OFF”) [FM] (note: µV at 75 Ω/ohms, 0 dBf = 1 x 10-15 W) 87.5 MHz ~ 107.9 MHz 1.0 µV (11.2 dBf) MONO 1.6 µV (15.3 dBf) STEREO 23 µV (38.5 dBf) MONO 77 dB STEREO 72 dB MONO 0.15 % STEREO 0.
List of preset codes / Liste de codes préréglés Denon Amp D Denon 81001, 82001, 83001, 84001 G Denon Tuner D Denon (Analog) Denon (XM Radio) 52863, 52795, 52800, 52805 52864, 52812, 52813, 52814 Denon Digital Tuner D Denon (NET/USB) 62865, 62837, 62838, 62839 I J Denon iPod D Denon 72815, 72816, 72817, 72818 Cable A B C D E F A-Mark ABC Accuphase Acorn Action Active ADB Aichi Denshi Americast Amstrad Archer Auna Austar BCC Bell South Bestlink Birmingham Cable Communications British Teleco
U V W Tascam Teac Technics Techwood Thomson Thorens Thule Audio Tokai Universum Victor Wadia Wards Y Yamaha Yorx 40393, 40420 40490, 40393, 40420 40029, 40303 40303 40053 40157 40157 40420 40157, 40053 40072 40393 40000, 40032, 40157, 40053, 40087, 40179 40490, 40868, 40032, 40036 40000 CD Recorder D J R S T Denon JVC RCA Sony Teac Thomson C D F G H I J K L M O Aiwa Akai Arcam Audiolab Carver Denon Fisher Garrard Genexxa GoldStar Grundig Harman/Kardon Inkel JVC Kenwood LG Luxman Magnavox Marantz M
F G H Eurocrypt EuroLine Europa Europhon Eurosky Eurostar Eutelsat Expressvu Fenner Ferguson Finlandia Finlux Flair Mate FMD Force Fortec Star 00455 01251 00863 00299 00262, 00299 00818 00713 00775, 01775 00713 00455, 01291, 01743 00455 00455 00713 01251, 01413, 01457 01101 01083 00455, 00497, 00795, 00879, Foxtel 01162, 01176, 01356 Fracapro Planet 00871 Fracarro 00125, 00871 France Telecom 00871 Freesat 00882 FTE 00863 FTEmaximal 00713, 00863 00173, 00262, 00299, 00394, Fuba 01214, 01251, 01801 Fugion
Satstation Schaub Lorenz Schneider T 01083 01214 00710, 01206, 01251 00394, 00504, 00863, 01075, Schwaiger 01083, 01111, 01317, 01334, 01412, 01457 SCS 00299 Sedea Electronique 00125, 01206, 01283, 01626 SEG 01075, 01087, 01251, 01626 Seleco 00871 Septimo 01375 Serd 01412 Serino 00610 Servimat 01611 ServiSat 00713, 01251 Sharp 01517 Siemens 00173, 01334, 01429 Silva 00299 Skantin 00713 SKR 00713 00856, 00099, 00847, 00887, SKY 01014, 01175, 01662, 01693, 01847, 01848, 01850 SKY Italia 00853, 01693, 01847,
Alba Albatron Alfide All-Tel Alleron Allorgan Allstar Ambassador America Action American High Amplivision Amstrad Amtron Anam Anam National Andersson Anglo Anhua Anitech Ansonic AOC Aolinpike Apex Digital AR Arc En Ciel Arcam Ardem Aristocrat Aristona ART Arthur Martin ASA Asberg Asora Astra Asuka ATD Atlantic Atori Auchan Audinac Audiosonic Audioton AVR3808CIEU.
Elcit Electroband Electrograph F 10163 10000 11755 10154, 10000, 10463, 10150, Electrohome 10178, 10030, 10073 Elekta 10009, 10264 Elfunk 11037, 11208 ELG 10037 Elin 10009, 10037, 10361, 10548 Elite 10037, 10218 Elta 10009, 10264 Emerald 10178 10047, 10017, 10154, 10451, 10236, 10463, 10180, 10150, 10178, 10171, 11944, 11911, Emerson 11909, 10714, 10668, 10623, 10486, 10036, 10371, 10370, 10361, 10037, 10195, 10170, 10070, 10073 Envision 10030, 10813 Enzer 10860 Erae 11371 Erres 10037 ESA 10812, 10171, 11
JVC K Kaige Kaisui Kambrook Kamp Kangli Kangyi Kapsch Karcher Kathrein Kawa Kawasho KB Aristocrat KDS KEC Kendo Kennedy Kennex Kenwood Khind KIC Kiota Kioto Kiton KLH KLL Kloss Kneissel Kolin Kolster Kongque Konichi Konig Konka Kontakt Korpel Korting Kosmos Koyoda Kreisen KTV Kuaile Kulun Kunlun AVR3808CIEU.
Panasonic Panavision Panda Pathe Cinema Pathe Marconi Pausa Paxonic PCE Penney Perdio Perfekt Petters Philco Philharmonic Philips Phocus Phoenix Phonola Pilot Pioneer Pionier Plantron Playsonic Polaroid Poppy Portland Powerpoint Prandoni-Prince Precision Premier President Prima Princeton Prinston Prinz Prism 10054, 10000, 10156, 10250, 10051, 10236, 10030, 11947, 11946, 11941, 11480, 11310, 11291, 11271, 10853, 10650, 10548, 10508, 10367, 10361, 10226, 10208, 10163, 10108, 10037, 10035 10037 10051, 1070
Strato Strong Studio Experience Stylandia Sunkai Sunstar Sunwatt Sunwood Superla Superscan Supersonic SuperTech Supra Supreme Susumu Sutron SV2000 SVA Svasa Swisstec Sydney Sylvania Symphonic Synco T Syntax Sysline T+A Tacico Tai Yi Taishan Tandberg Tandy Targa Tashiko Tatung TCL TCM Teac Tec Tech Line Techica Technica AVR3808CIEU.
E F G H J K L M N P R S T U V Elfunk Ferguson Finlux Goodmans Hitachi JDV Jensen KLH Lenco Logik Luker Luxor Matsui Maxim Medion Mirror Naiko Narita Panasonic Philips Powerpoint Prima RCA Roadstar Saivod Samsung Schneider SEG Sova Stevison Sylvania Teac Technica Telefunken Thomson Transonic United Vestel 11037 11037 11556 10587, 11037, 11900 11960 11982 11933 11962 10587 11037 11982 11037 11037 11982 11900 11900 11982 11982 11941 11454, 10556, 11961 10698 11933 11948, 11958 11900 11982 11903 11982 11
GE GEC Gemini General General Technic Genexxa Go Video GoldStar Goodmans GPX Gradiente Graetz Granada Grandin Grundig H Haaz Hanimex Hanseatic Haojie Harley Davidson Harman/Kardon Headquarter Hewlett Packard HI-Q Hinari Hisawa Hischito Hitachi Hoeher Hornyphon Howard Computers HP Hughes Network Systems Humax Hush Hypson I Hytek iBUYPOWER Imperial Ingersol Interbuy Interfunk Internal 11 AVR3808CIEU.
Schaub Lorenz Schneider Scott Sears Seaway SEG SEI Sei-Sinudyne Seleco Semp Sentra Sharp Shinco Shintom Shivaki Shogun Siemens Siera Signature Silva Silver SilverCrest Singer Sinudyne Smaragd Sonic Blue Sonographe Sonolor Sontec Sonwa Sony Soundmaster Soundwave Stack 9 Standard Stern STS Sunkai Sunstar Suntronic Supra Susumu SV2000 SVA 20000, 20104, 20041, 20106, 20315, 20348 20037, 20081, 20240, 20000, 20042, 20278, 20348, 20352, 20642, 21137 20184, 20045, 20121, 20043 20060, 20035, 20162, 20037, 20048, 2
T U W Z Sears SEG Sharp Shivaki Siemens Sinudyne Sony Supra Sylvania Symphonic Tatung Teac Technics Technosonic Telefunken Thomas Thomson Toshiba United White Westinghouse Zenith 20037, 20000, 21237 20637 20037, 20048, 20807 20037 20081 20352 20032, 20000, 21232 20348 20081, 21781 20000 20352 20037, 20000, 20637, 20642 20081 20352 20278 20000 20278 20352, 20432, 20845, 21145 20742 Sharp Apex Digital 20278, 20637 20000, 20479, 20637, 21479 TV/VCR/DVD Combination S Amitech Amoi Amphion Media Works Ams
Jaton JBL JDB JDV Jeken Jepssen JMB JNC JSI K L M 30665 30702 30730 31367 30699 31250 30695 30672, 31271 31423 30503, 30539, 30558, 30623, JVC 30867, 31164, 31597, 31860 jWin 31051 Kansas Technologies 31233, 31530 Karcher 30783 Kawasaki 30790 Kendo 30672, 30699, 30713, 30831 Kennex 30713, 30770, 30898 Kenwood 30490, 30534 Kiiro 30770 Kiss 30665, 30841, 31523 KLH 30815, 30717, 30790, 31020 Kloss 30533 Koda 31230 Konka 31192 Koss 30651, 31061, 31423 Kreisen 31421 KXD 31321, 31923 Lasonic 30627, 30798, 307
T Sylvania Symphonic Synn Tandberg Tangent Targa Tatung Tchibo TCL TCM Teac Tec Technica Technics Technika Technisson Technosonic Techwood Tedelex Telefunken Teletech Tensai Tevion Theta Digital Thomson Tivo Tokai Tom-Tec Top Suxess Toshiba U TRANS-continents Transonic Tredex TruVision Tsinghua Tongfang TSM Umax Unimax United Universum V Uptek upXus Urban Concepts US Logic Venturer 15 AVR3808CIEU.
DVD preset codes / Codes préréglés DVD DENON Model No. / Modéle numéro 32134 (default / défaut) DVD-555 DVD-755 DVD-900 DVD-910 DVD-955 DVD-1000 DVD-1200 DVD-1500 DVD-1710 DVD-1910 DVD-1930CI DVD-2200 DVD-2800 DVD-2800g DVD-2900 DVD-2910 DVD-2930CI DVD-3800 DVD-3910 DVD-3930CI DVD-5900 DVD-5910 DVD-9000 DVM-715 DVM-1800 DVM-1805 DVM-1815 DVM-2815 DVM-4800 30490 DVD-800 DVD-1600 DVD-2000 DVD-2500 DVD-3000 DVD-3300 [ ]z: Preset codes set upon shipment from the factory.
AVR3808CIEU.
AVR3808CIEU.
TOKYO, JAPAN www.denon.com AVR3808CIEU.indd 108 Denon Brand Company, D&M Holdings Inc.
