Operation Manual

ManualsBrandsDenon ManualsAudioAVR-3808A



ENGLISH

Getting Started Connections Setup Playback Information Troubleshooting

Speciﬁcations

Remote Control

Amp Assign / Multi-Zone Connections and

Operations

The AVR-3808 is compatible with the following types of playback:

• Multi-zone playback (ZONE2 & ZONE3)

• Bi-amp playback (front speaker)

NOTE

• For bi-amp playback, use speakers compatible with that type of connection.

• When conducting bi-amp playback, remove the short-circuiting boards (or wires) from the speaker

terminals.

Multi-Zone Settings with the Amp Assign Function

The amp assign function lets you assign the ampliﬁers for the different channels built into the AVR-3808 to

the speaker outputs for the different zones.

Select the desired playback environment from among “Setting 1” to “Setting 4”, then set the corresponding

“Amp Assign” mode at GUI menu “Manual Setup” – “Option Setup” – “Amp Assign” (vpage 34).

Connect the speakers as described at “Speaker connections”.

“Setting 3” is possible to switch the Amp Assign mode between the 5.1-channel mode and 2-channel

mode without changing the speaker connections.

SBL SBR

SW C FR

Main zone

7.1ch

Setting 1 :

F 7.1-channel playback

Both A and B can be installed for SR and SL.

7.1CH

(Default)

Amp Assign mode:

Speaker terminal

Amp Assign mode

FRONT

CENTER

SURR-A SURR-B

SURR. BACK /

AMP ASSIGN

R L R L R L R L

7.1CH FR FL C SR-A SL-A SR-B SL-B SBR SBL

n Speaker connections