Operation Manual

22
ENGLISH
Connecting Other Sources Connecting Other Sources
ENGLISH
For instructions on operations using the MULTI ZONE functions ( page 60 ~ 62).
Connecting the MULTI ZONE terminals
•If another power amplifier or pre-main (integrated) amplifier is connected, the ZONE2 (or ZONE3)
pre-out (variable or fixed level) terminals can be used to play a different program source in ZONE2
(or ZONE3) the same time ( page 60).
• The ZONE2 video out is only for the ZONE2.
ZONE2 (or ZONE3) pre-out connections
NOTE:
• For the AUDIO output, use high quality pin-plug cables and wire in such a way that there is no
humming or noise.
• For instructions on installation and operation of separately sold devices, refer to the devices’
operating instructions.
Monitor TV
(ZONE2)
S VIDEO
IN
VIDEO
IN
AUX OUT
Power amplifier
(ZONE2 or ZONE3)
R
L
IN
H
G
R
L
R
L
A
+
+
INFRARED
SENSOR
INFRARED RETRANSMITTER
INPUT OUTPUT
Extension terminal
for future use.
• When the surround back’s power amplifier is assigned to the ZONE2 or ZONE3 output channel
at “Power Amp Assign” in the “System Setup Menu”, the surround back speaker terminals can
be used as the ZONE2 or ZONE3 speaker out terminals ( page 61).
• The connections diagram below is an example for when the surround back speaker is assigned
to the ZONE2 stereo 2 channel.
In this case, surround back speaker out can not be used for MAIN ZONE.
ZONE2 / ZONE3 speaker out connections
ZONE2
><><
><
><><><><
><><
IN
(
R
) (
L
) (
L
) (
R
)
(
L
) (
R
)
(
L
) (
R
)
Connection
terminal for
subwoofer
with built-in
amplifier
(subwoofer),
etc.
Surround speaker
systems (B)
Front speaker
systems
Surround speaker
systems (A)
Subwoofer
ZONE2 Front speaker
systems
Center speaker