Operation Manual

44
Basic Operation Basic Operation
ENGLISH
ENGLISH
Playing the iPod
®
iPod
Connecting the iPod
Music stored on an iPod can be played when the iPod is connected to the AVR-4306’s iPod connector. The iPod can be controlled
using the buttons on the main unit and the remote control unit.
iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.
• Connect the iPod cable (sold separately) directly to the iPod.
(To connect via an iPod Dock, see “Setting the iPod Assign”
( page 68)).
• Some of the functions may not operate, depending on the type
of iPod and the software version.
1
Connect the AVR-4306 and iPod using the iPod
cable.
(Main unit)
(Remote control unit
in the AMP mode)
If the screens above are not displayed, the iPod may not be
properly connected. Try connecting again.
2
Select the input source to “AUX/iPod”.
• The iPod music menu screen is displayed.
Artists
Playlists
Display (iPod screen)
iPod
1
Set the input source to “TUNER”.
2
Press the TU (TUNER) button on the remote
control unit to select the TUNER mode.
RT (Radio Text)
“RT” appears on the display when radio text data is received.
3
Press the SEARCH button until “RT ON”
appears on the display.
The main unit’s display switches as follows each time the
SEARCH button is pressed.
RDS SEARCH PTY SEARCH
RT ON TP SEARCH
Display
While receiving an RDS broadcast station, the text data
broadcast from the station is displayed.
To turn the display off, press the CURSOR
FF
or
GG
button.
If no text data is being broadcast, “NO TEXT DATA” is
displayed.
With the iPod, non-copyrighted contents and contents that may be legally reproduced or played may be reproduced and played by
individuals for their personal use. Violating copyrights is prohibited by law.
NOTE:
• The AVR-4306 is equipped with two iPod connectors, one
each on the front and rear panels. It is not possible to use
the set with iPods connected to both the connectors at the
same time. Only connect one iPod at a time.
• DENON will accept no responsibility whatsoever for loss or
damage of data on an iPod occurring when the iPod is used
connected to the AVR-4306.
• The maximum battery charge output from the iPod
connector is 8 W.