Operation Manual


Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting
ENGLISH
Specifications
–6
~
0
~
+6
0
~
+12
Picture Adjust
Adjust the picture quality.
F Menu tree F
Parameter
Picture Adjust
a Contrast
s Brightness
d Chroma Level
f Hue
[Variable range]
[Variable range]
[Variable range]
[Variable range]
–6
~
0
~
+6
–6
~
0
~
+6
a
Contrast
Adjust picture contrast.
• Adjusting the “Contrast”, “Brightness”, “Chroma Level” and “Hue”
settings does not affect the HDMI input signal.
• “Hue” can be adjusted for composite video and S-Video signals.
• The adjustment values are stored for the individual input sources.
s
Brightness
Adjust picture brightness.
d
Chroma Level
Adjust picture chroma level (saturation).
f
Hue
Adjust color hue.
Information
Power Select Source Volume Level
Select Source Name Surround Mode Input Mode
Assign Room EQ Video Select Src Level Rec Select
Night Mode RESTORER
etc.
Status
Shows information about current settings.
F Menu tree F
Information
Status
a MAIN ZONE
s ZONE2/3/4
a
MAIN ZONE
Shows information about settings for main zone.
The items displayed differ according to the input source.
s
ZONE2/3/4
Shows information about settings for multi-zone.
[Items to be checked]
[Items to be checked]
0 ms
~
200 ms
OFF Low Middle High
h
Audio Delay
Compensate for mismatched timing between video and
audio.
g
Night Mode
Optimized setting for late-night listening.
[Selectable items]
Operating from the main remote control unit
Press the NGT button.
The “ ” indicator lights when “Low”, “Middle” or “High” is
selected.
[Variable range]
Delay audio.
This sets the delay time for audio signals.
• This cannot be adjusted when playing in the EXT. IN, DIRECT or
STEREO mode (with “Front” set to “Large”, “Tone Defeat” to “ON”
and “Room EQ” to “OFF”.)
• The adjustment range is 0 to 100 ms when the Auto Lipsync
Correction function is activated.
Operating from the main remote control unit
q Press the A. DL button.
w Use the o p button to set.
OFF
High
Low Middle
Setup