Operation Manual


Getting Started Connections Setup Remote Control Multi-Zone Information Troubleshooting
ENGLISH
Specifications
Playing repeatedly
Press [REPEAT] on the sub remote control unit.
[Selectable items] All One OFF
: “Source Select”
– “NET/USB” –
“Playback Mode” – “Repeat” (vpage 43)
Playing in random order
Press [RANDOM] on the sub remote control unit.
[Selectable items] ON OFF
: “Source Select”
– “NET/USB” –
“Playback Mode” – “Random” (vpage 43)
• When playing still picture (JPEG) files, tracks can also be selected
using the operation described below.
During playback, either press [d] (previous file) or [f] (next file).
• If the USB memory device is divided into multiple partitions, only the
top partition can be selected.
• The AVR-4308 is compatible with MP3 files conforming to “MPEG-1
Audio Layer-3” standards.
• If [USB] on the sub remote control unit is pressed when the USB
memory device or folder is selected, all the tracks on the USB
memory device or in the folder are played.
NOTE
• The AVR-4308 is equipped with two USB ports, one each on the
front and rear panels. It is not possible to use the set with USB
memory devices connected to both the ports at the same time.
Select the USB port you want to use at the “Source Select” – “NET/
USB” – “Playback Mode” – “USB Select” menu.
• DENON will accept no responsibility whatsoever for any loss or
damage to data on USB memory devices when using the USB
memory device connected to the AVR-4308.
• USB memory devices will not work via a USB hub.
• DENON does not guarantee that all USB memory devices will operate
or receive power. When using a USB connection type portable hard
disk of the type for which power can be supplied by connecting an
AC adapter, we recommend using the AC adapter.
• It is not possible to connect and use a computer via the AVR-4308’s
USB port using a USB cable.
• The AVR-4308 is not compatible with the iPod shuffle.
Selecting tracks
During playback, either press u (previous track) or i (next track).
Operating the AVR-4308 Using a Browser
(Web control)
This function lets you operate the AVR-4308 using Internet
Explorer.
1
Switch “OFF” the “Power Saving” setting under
“Manual Setup” – “Network Setup” – “Other” on the
GUI menu (vpage 36).
2
Check the AVR-4308’s IP address with “Manual
Setup” – “Network Setup” – “Network Information”
on the GUI menu (vpage 36).
3
Enter the AVR-4308 IP address in Internet Explorer’s
address box.
For example, if the IP address of AVR-4308 is “192.168.11.3”,
enter “http://192.168.11.3”.
Checking the IP address.
Entering the IP address.
4
When the top menu is displayed, click on the menu
you want to operate.
5
Operate.
[Example 1] Main zone control screen
*1 : Normally, there is a change to the latest information each time
you operate. When operated from the main unit, click because
the screen is not updated.
*2 : Displayed when setting “Top Menu Link Setup” to “ON” in
[Example 3].
*3 : To avoid mistakenly performing menu operations of a zone you
are not operating, we recommend that you register the setting
contents for each zone under Favorites in your browser.
Click when
you operate
each zone.
(vExample 1)
Click when you
operate the setup
menu. (vExample 2)
Click to change
zone name.
(vExample 3)
Click when you
operate a small screen
such as a PDA screen,
etc. (vExample 4)
Click when you
update to the latest
information. (*1)
Click to return to the top
menu. (*2)
Click to perform each
operation.
Changes to each operation
screen.
(vExample 5)
Click to add a setting to the “Favorites” in your browser. (*3)
Playback