Operation Manual


Getting Started Connections Setup Remote Control Multi-Zone Information Troubleshooting
ENGLISH
Specifications
Other Operations and
Functions
Other Operations
Playing Super Audio CD
1
Assign “DENON LINK” or “HDMI” at the “Digital”
or “HDMI” setting (vpage 43).
2
Either turn <SOURCE SELECT> or press [SOURCE
SELECT] to select the input source assigned in step 1.
The “ ” or “ ” indicator lights on the display.
3
Use INPUT MODE to select the input mode (vpage
42).
Select the input mode according to the program source to be
played.
4
Select the surround mode (vpage 45, 46).
We recommend playing in the DIRECT mode.
5
Start playing the Super Audio CD.
The “ ” indicator lights on the display.
For operating instructions, refer to the respective equipment’s
operating instructions.
• When playing DSD signals in the DIRECT or PURE DIRECT mode,
the DSD signals are converted as such into analog signals. When
playing in other surround modes, the DSD signals are first converted
into PCM format, then into analog signals.
• “DSD DIRECT” is shown on the display when playing DSD 2-channel
signals in the DIRECT mode. “DSD MULTI DIRECT” is shown on
the display when playing DSD multi--channel signals in the DIRECT
mode.
Recording on an External Device
(REC OUT mode)
You can listen to one program source while recording a
different program source.
1
Press <ZONE2/3/4 / REC SELECT>.
“ZONE2 SOURCE” is shown on the display.
ZONE2 SOURCE ZONE2 TUNER ZONE2 DAB····
RECOUT DAB RECOUT NET/USB RECOUT SOURCE····
2
Turn <SOURCE SELECT> until “RECOUT SOURCE”
is displayed.
The “ ” indicator lights.
3
Turn <SOURCE SELECT> to choose the input source
to be recorded.
4
Play the program source.
For operating instructions, refer to the respective equipment’s
operating instructions.
To record FM or AM broadcasts, select the broadcast (vpage
52).
5
Start recording.
For operating instructions, refer to the respective equipment’s
operating instructions.
• To cancel, press <ZONE2/3/4 / REC SELECT>, then turn <SOURCE SELECT>
until “ZONE2 SOURCE” is displayed.
• Make a test recording before starting the actual recording.
• Signals are only output to the analog REC OUT connectors when
the digital signals input to the digital input connectors (OPTICAL/
COAXIAL) are PCM (2-channel) signals.
• Digital audio signals input to the DENON LINK or HDMI connectors
are not output to the REC OUT connectors, so connect using the
OPTICAL or COAXIAL connectors.
• Sources selected with the REC OUT mode are output from ZONE2
as well.
• In the REC OUT mode, the remote control unit’s ZONE2 mode
buttons cannot be operated.
• When the “Digital Out” setting is set to “ZONE4 Select”, the
OPTICAL3 output connector becomes the ZONE4 output. When
using for recording, set to “Rec Select”.
• The “DAB” digital audio output signals are not output from the
OPTICAL2 or OPTICAL3 output connectors. Also, network audio
signals (Internet radio, music server, USB) are not output if they are
copyright-protected.
NOTE
• Recordings you make are for your personal enjoyment and should
not be used for other purposes without permission of the copyright
holder.
• When an input source to which “DENON LINK” has been assigned
is selected in the MAIN ZONE, the PCM signal and network audio
signal (Internet radio, music server or USB) input from the digital input
connector cannot be output to the analog REC OUT connectors.
• Input sources for which “Delete” is selected at “Source Delete”
cannot be selected.
Playback