Operation Manual

ManualsBrandsDenon ManualsAV ReceiverAVR-4308A



Getting Started Connections Setup Playback Remote Control Information Troubleshooting

ENGLISH

Speciﬁcations

Amp Assign / Multi-Zone Connections and

Operations

The AVR-4308 is compatible with the following types of playback:

• Multi-zone playback (ZONE2 & ZONE3)

• Bi-amp playback (front speaker)

• Bi-wiring playback (front speaker)

NOTE

• For bi-amp and bi-wiring playback, use speakers compatible with that type of connection.

• When conducting bi-amp or bi-wiring playback, remove the short-circuiting boards (or wires) from the

speaker terminals.

Multi-Zone Settings with the Amp Assign Function

The amp assign function lets you assign the ampliﬁers for the different channels built into the AVR-4308 to

the speaker outputs for the different zones.

Select the desired playback environment from among “Setting 2” to “Setting 7”, then set the corresponding

“Amp Assign” mode at GUI menu “Manual Setup” – “Option Setup” – “Amp Assign” (vpage 37).

Connect the speakers as described at “Speaker connections”.

With “Setting 5” to “Setting 7”, it is possible to switch the Amp Assign mode between the 7.1-channel

mode and the multizone mode without changing the speaker connections.

SBL SBR

C FR

Main zone

7.1ch

Setting 1:

F 7.1-channel playback

n Speaker connections

7.1CH

Amp Assign mode:

Speaker terminal

FRONT

CENTER

SURR-A

SURR.

BACK

SURR-B/

AMP ASSIGN

AMP ASSIGN-

R L R L R L R L R L

Speaker to connect FR FL C SR-A SL-A SBR SBL SR-B SL-B – –

(Default)

n Channels outputting to the various speaker terminals