Operation Manual

0
Getting Started Connections Playback Remote ControlMulti-zone Information Troubleshooting Specifications
ENGLISH
Making Detailed Settings (Manual Setup)
Main remote control
operation buttons
:Displaying the menu
Cancel the menu
:Moves the cursor
(Up/Down/Left/Right)
:Confirm the setting :Return to previous menu
Setting items Setting contents
Network Connecting
(Continued)
y Use uio p to input the proxy server port number and press
ENTER.
u Use i to select “Exit” and press ENTER.
Setup is complete.
Other
Network function on/off
setting during standby, and
PC language setting.
Network Standby : Set the network function on/off during standby.
ON : Network is on during standby. Main unit operable with a network-
compatible controller.
OFF : Suspend network function during standby.
Set to “ON” when using the web control function.
•
•
Character : When characters are not displayed correctly, set the MP3 ID3-
Tag character code type reproduced by the USB memory device.
Auto : Auto-select character code.
Latin : Select ISO 8859-1 Latin-1.
Japanese : Select Shift-JIS.
If the characters are not properly displayed when set to “Auto”, set to
“Latin” or “Japanese”.
•
•
•
PC Language : Select computer environment language.
ara / chi (smpl) / chi (trad) / cze / dan / dut / eng / fin / fre / ger / gre
/ heb / hun / ita / jpn / kor / nor / pol / por / por(BR) / rus / spa / swe
/ tur
•
Friendly Name Edit : The Friendly Name is the name AVR-4310 displayed
on the network. Up to 63 characters can be input. The default Friendly
Name on first use is “DENON:[AVR-4310]”.
The types of characters that can be input are as shown below.
GLower case charactersH abcdefghijklmnopqrstuvwxyz
GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ
GSymbolsH ! # “ $ % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] ˆ _ ` { | } ˜ (Space)
GNumbersH 0123456789
You can change the character type when you press [SEARCH] or
MENU during character input.
Default : Reset all settings to factory default.
Yes : Reset to the defaults.
No : Do not reset to the defaults.
•
•
Party Mode Function : Set the Party Mode function.
OFF : Disable Party Mode function.
ON : Enable Party Mode function.
Refer to page 79, “Playing the Same Network Audio on Different
Devices Connected in a Network (Party Mode Function)” for more
information on the party mode function.
•
•
See overleaf
Setting items Setting contents
Other
(Continued)
Party Start Level : Make settings for volume level when the Party Mode
is started.
Last : The same volume as set before the party mode was started.
– – – (0) : Always use the muting on condition when the Party Mode is
started.
–80dB ~ 18dB (1 ~ 99) : Start party mode with your preferred volume.
This can be set when “Party Mode Function“ is set to “ON“.
This is displayed from 0 to 99 when “Volume Display” (vpage 41) is
set to “Absolute”.
You can set to the upper limit set with “Volume Limit” (vpage 41) .
•
•
•
•
•
•
Network Status : Displays up to a maximum of 10 DENON products
connected on the same network.
Friendly Name / Model Name / Power ON/Standby / Select Source /
Volume Level / Party Mode status
“Network Status” is only displayed for DENON products supporting
the Network Status function.
•
Update Notification : Displays a notification message on the AVR-4310’s
GUI screen when the latest firmware is released with “Firmware Update”.
The notification message is displayed for about 20 seconds when the
power is turned on. Connect to broadband Internet (vpage 22) when
using this function.
ON : Display update message.
OFF : Do not display upgrade message.
When you press ENTER during display of the notification message, the
“Check for Update” screen is displayed. (Refer to page 44 for more
information on “Firmware Update”)
Press RETURN to erase the notification message.
•
•
•
•
Upgrade Notification : Display a notification message on the AVR-4310’s
GUI screen when downloadable firmware is released with “Add New
Feature”. The notification message is displayed for about 20 seconds
when the power is turned on. Connect to broadband Internet (vpage
22) when using this function.
ON : Display update message.
OFF : Do not display upgrade message.
When you press ENTER during display of the notification message, the
“Add New Feature” screen is displayed. (Refer to page 44 for more
information on “Add New Feature”)
Press RETURN to erase the notification message.
•
•
•
•
Settings