Operation Manual


Getting Started Connections Playback Remote ControlMulti-zone Information Troubleshooting Specifications
ENGLISH
Setting items Setting contents
Napster Account
Set or change Username
and Password (vpage 62
“Listening to Napster“).
Username / Password
The types of characters that can be input are as shown below.
GLower case charactersH abcdefghijklmnopqrstuvwxyz
GUpper case charactersH ABCDEFGHIJKLMNOPQRSTUVWXYZ
GSymbolsH ! # “ $ % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] ˆ _ ` { | } ˜ (Space)
GNumbersH 0123456789
You can change the character type when you press [SEARCH] or MENU
during character input.
The password may not contain underscores ( _ ).
•
•
Network Information
Display network information.
Friendly Name / DHCP= ON/OFF / IP Address / MAC Address
Making Detailed Settings (Manual Setup)
Main remote control
operation buttons
:Displaying the menu
Cancel the menu
:Moves the cursor
(Up/Down/Left/Right)
:Confirm the setting :Return to previous menu
Setting items Setting contents
Bass
Adjust low frequency range
(bass).
–10dB ~ +10dB (0dB)
Treble
Adjust high frequency range
(treble).
–10dB ~ +10dB (0dB)
HPF
Make settings for cutting
the low range to reduce
distortion in the bass.
OFF : The low range is not attenuated.
ON : The low range is attenuated.
Lch Level
Adjust the left channel
output level.
–12dB ~ +12dB (0dB)
The “Lch Level” can be set when “Channel“ (vpage 41) is set to
“Stereo“.
Rch Level
Adjust the right channel
output level.
–12dB ~ +12dB (0dB)
The “Rch Level” can be set when “Channel“ (vpage 41) is set to
“Stereo“.
Channel
Set the signal output from
multi-zone.
Stereo : Select stereo output.
Mono : Select mono output.
When “Amp Assign” (vpage 33) is set to “ZONE (MONO)”, the
“Channel” setting is automatically set to “Mono”.
Set the audio to playback with multi-zone (ZONE2, ZONE3).
Making the Multi-zone Settings (Zone Setup)
Default settings are underlined.
Setting items Setting contents
Volume Display
Set how volume is
displayed.
Relative : Display - - - dB (Min), in the range –80 dB ~ 18 dB.
Absolute : Display in the range 0 (Min) ~ 99.
The “Volume Display” setting is applied also to the “Volume Level”,
“Volume Limit” and “Power On Level” display method.
The “Volume Display” setting applies to all zones.
•
•
Volume Level
Set the volume output level.
Variable : Volume adjustment enabled by main unit and remote
controller.
–40dB (41) : Fix volume at –40 dB. Set when adjusting volume by external
amp.
0dB (81) : Fix volume at 0 dB. Set when adjusting volume by external
amp.
When “Amp Assign” (vpage 33) is set to “ZONE2”, “ZONE3” or
“ZONE (MONO)”, the “Volume Level” setting is automatically set to
“Variable”.
Volume Limit
Make a setting for maximum
volume.
OFF : Do not set a maximum volume.
–20dB (61) / –10dB (71) / 0dB (81)
Can be set when the multi-zone “Volume Level” setting (vpage 41)
is “Variable”.
Power On Level
Define the volume setting
that is active when the
power is turned on.
Last : Use the memorized setting from the last session.
– – – (0) : Always use the muting on condition when power is turned on.
–80dB ~ 18dB (1 ~ 99) : The volume is adjusted to the set level.
Can be set when the multi-zone “Volume Level” setting (vpage 41)
is “Variable”.
Mute Level
Set the amount of attenuation
when muting is on.
Full : The sound is muted entirely.
–40dB : The sound is attenuated by 40 dB down.
–20dB : The sound is attenuated by 20 dB down.
Settings