Operation Manual


Getting Started Connections Settings Remote ControlMulti-zone Information Troubleshooting Specifications
ENGLISH
Playing Network Audio, USB Memory Devices
Listening to Internet Radio
1
Playback preparation.
q Check the network environment, then turn on the AVR-
4310’s power (vpage 22 “Connecting to a Home Network
(LAN)”).
w If settings are required, make the “Network Connecting”
(vpage 38).
2
Press [SOURCE SELECT] to display the GUI Source
Select menu, then select “ ” (vpage 26).
3
Set the main remote control unit to the “NET/USB”
mode (vpage 86 “Operating the Main Remote
Control Unit”).
4
Press ui to select the item you want to play, then
press ENTER or p.
The station list is displayed.
5
Press ui to select the station, then press ENTER
or p.
Playback starts once buffering reaches “100%”.
6
Adjust the items below.
Adjusting the master volume (vpage 64)
Selecting the surround mode (vpage 66)
Adjusting the Sound and Picture Quality
(vpage 69)
n
n
n
Button located on both the main unit
and the remote control unit BUTTON
Button only on the main unit <BUTTON>
Button only on the remote control unit [BUTTON]
Symbols used to indicate buttons in this manual
To stop (vpage 64)
Searching up or down pages (vpage 65)
Searching by first letter (vpage 65)
n
n
n
There are many Internet radio stations on the Internet, and the
quality of the programs they broadcast as well as the bit rate of the
tracks varies widely.
Generally, the higher the bit rate, the higher the sound quality, but
depending on the communication lines and server traffic, the music
or audio signals being streamed may be interrupted. Inversely, lower
bit rates mean a lower sound quality but less tendency for the sound
to be interrupted.
“Server Full” or “Connection Down” is displayed if the station is
busy or not broadcasting.
On the AVR-4310, folder and file names can be displayed as
titles. Any characters that cannot be displayed are replaced with
“. (period)”.
Use the RESTORER mode to expand the low and high frequency
components of compressed audio files and achieve a richer sound
“RESTORER” (vpage 73). The default setting is “Mode 3”.
When <STATUS> is pressed, the display can be switched between
the title name and radio station name.
The time (default : 30 sec) for which the GUI menu are displayed
can be set at GUI menu “GUI” – “NET/USB” (vpage 42). Press
uio p to return to the original screen.
•
•
•
•
•
•
Recently Played Internet Radio Stations
Recently played internet radio stations can be selected from “Recently
Played”.
Up to 20 stations stored in “Recently Played”.
1
Press ui to select “Recently Played”, then press
ENTER or p.
2
Press ui to select the item you want to play, then
press ENTER or p.
Playback
ENTER
<STATUS>
uio p
ENTER
[ NET/USB]
uio p
[SOURCE
SELECT]
(MAIN mode)