Operation Manual


Getting Started Connections Settings Remote ControlMulti-zone Information Troubleshooting Specifications
ENGLISH
1
Playback preparation.
q Check the network environment, then turn on the AVR-
4310’s power (vpage 22 “Connecting to a Home
Network (LAN)”).
w If settings are required, make the “Network Connecting”
(vpage 38).
e Prepare the computer (vComputer’s operating
instructions).
2
Press [SOURCE SELECT] to display the GUI Source
Select menu, then select “ ” (vpage 26).
3
Switching the main remote control unit to the
“NET/USB” mode (vpage 86 “Operating the
Main Remote Control Unit”).
4
Use ui to select the server including the le to be
played, then press ENTER or p.
5
Press ui to select the search item or folder, then
press ENTER or p.
6
Press ui to select the le, then press ENTER or p .
Playback starts once buffering reaches “100%”.
7
Adjust the items below.
Adjusting the master volume (vpage 64)
Selecting the surround mode (vpage 66)
Adjusting the Sound and Picture Quality
(vpage 69)
n
n
n
Use this procedure to play music files, image files or playlists.
Playing files that have been Preset or Registered in
Your Favorites
Files can be preset, registered in your favorites and played using the
same operations as for Internet radio stations (vpage 60).
NOTE
Presettings are erased by overwriting them.
When the operation described below is performed, the media
server’s database is updated and it may no longer be possible to
play preset or favorite music files.
When you quit the media server and then restart it.
When music files are deleted or added on the media server.
•
•
•
•
Playing Network Audio, USB Memory Devices
Playing Files Stored on a Computer
When playing still picture (JPEG) files, files can also be selected
using the operation described below.
During playback, either press [TU d] (previous file) or [TU f] (next
file).
Connections to the required system and specific settings must be
made in order to play music files (vpage 22).
Before starting, you must launch the computer’s server software
and set the files as server contents. For details, see the operating
instructions of your server software.
Depending on the size of the still picture (JPEG) file, some time may
be required for the file to be displayed.
The order in which the tracks/files are displayed depends on the
server specifications. If due to the server specifications the tracks/
files are not displayed in alphabetical order, searching by the first
letter may not work properly.
WMA Lossless files can be played when using a server supporting
transcoding, such as Windows Media Player Ver. 11.
Use the RESTORER mode to expand the low and high frequency
components of compressed audio files and achieve a richer sound
(vpage 73). The default setting is “Mode 3”.
The time (default : 30 sec) for which the GUI menus are displayed
can be set at “GUI” – “NET/USB” (vpage 42).
Use <STATUS> to switch between displaying the title name, artist
name or album name.
•
•
•
•
•
•
•
•
•
To stop (vpage 64)
Stopping playback temporarily (vpage 64)
Selecting tracks (vpage 65)
Playing repeatedly (vpage 64)
Playing in random order (vpage 65)
Searching pages (vpage 65)
Searching by first letter (vpage 65)
n
n
n
n
n
n
n
Playback