Operation Manual


Getting Started Connections Settings Remote ControlMulti-zone Information Troubleshooting Specifications
ENGLISH
Only USB memory devices conforming to mass storage class and
MTP (Media Transfer Protocol) standards can be played on the AVR-
4310.
1
Playback preparation.
q At “USB Select” (vpage 50), select the USB port to be
used.
w Connect the USB memory device to the USB port set in
q.
2
Press [SOURCE SELECT] to display the GUI Source
Select menu, then select “ ” (vpage 26).
3
Set the main remote control unit to the “NET/USB”
mode (vpage 86 “Operating the Main Remote
Control Unit”).
4
Press ui to select the search item or folder, then
press ENTER or p.
5
Press ui to select the le, then press ENTER or p .
Playback starts once buffering reaches “100%”.
6
Adjust the items below.
Adjusting the master volume (vpage 64)
Selecting the surround mode (vpage 66)
Adjusting the Sound and Picture Quality
(vpage 69)
n
n
n
By default, the front panel’s USB port will be used.
Depending on the size of the still picture (JPEG) file, some time may
be required for the file to be displayed.
During playback of still picture (JPEG) files, the files can also be
switched using [TU d] (previous file) and [TU f] (next file).
If the USB memory device is divided into multiple partitions, only the
top partition can be selected.
The AVR-4310 is compatible with MP3 files conforming to “MPEG-1
Audio Layer-3” standards.
When [USB] on the sub remote control unit is pressed, playback
starts from the first file stored on the USB memory device.
•
•
•
•
•
•
NOTE
The AVR-4310 is equipped with two USB ports, one each on the front
and rear panels. It is not possible to use the set with USB memory
devices connected to both the ports at the same time. Select the
USB port you want to use at “USB Select” (vpage 50).
DENON will accept no responsibility whatsoever for any loss or
damage to data on USB memory devices when using the USB
memory device connected to the AVR-4310.
USB memory devices will not work via a USB hub.
DENON does not guarantee that all USB memory devices will
operate or receive power. When using a portable USB connection
type HDD of the kind to which an AC adapter can be connected to
supply power, use the AC adapter.
It is not possible to connect and use a computer via the AVR-4310’s
USB port using a USB cable.
The AVR-4310 is not compatible with the iPod shuffle.
•
•
•
•
•
•
Playing Files Stored on USB Memory
Devices
Playing Network Audio, USB Memory Devices, Listening to Napster
To stop (vpage 64)
Stopping playback temporarily (vpage 64)
Selecting tracks (vpage 65)
Playing repeatedly (vpage 64)
Playing in random order (vpage 65)
Searching pages (vpage 65)
Searching by first letter (vpage 65)
n
n
n
n
n
n
n
Button located on both the main unit
and the remote control unit BUTTON
Button only on the main unit <BUTTON>
Button only on the remote control unit [BUTTON]
Symbols used to indicate buttons in this manual
Sub remote control unit
1
Playback preparation.
q Check the network environment, then turn on the AVR-
4310’s power (vpage 22 “Connecting to a Home Network
(LAN)”).
w If settings are required, make the “Network Connecting”
(vpage 38).
2
Press [SOURCE SELECT] to display the GUI Source
Select menu, then select “ ” (vpage 26).
3
Set the main remote control unit to the “NET/USB”
mode (vpage 86 “Operating the Main Remote
Control Unit”).
Listening to Napster
Playback
ENTER
uip <STATUS>
ENTER
[TU d]
[ NET/USB]
ui p
[TU f]
[SOURCE SELECT]
[USB]
(MAIN mode)