Operation Manual


Getting Started Connections Settings Remote ControlMulti-zone Information Troubleshooting Specifications
ENGLISH
Other Operations and Convenient Functions
When connected to a Blu-ray disc player compatible with DENON LINK
4th, it is possible to play HD audio signals from BDs with no jitter.
NOTE
To play DENON LINK 4th signals, make HDMI and DENON LINK
connections with the compatible Blu-ray disc player.
Set the Blu-ray disc player’s “HDMI Control” setting to “ON”, the
“DENON LINK” setting to “4th”. For instructions on operation, refer
to the Blu-ray disc player’s manual.
When a BD is played with the input mode set to “Auto”, playback
is performed in the DENON LINK 4th mode. When a disc other
than a BD is played with the input mode set to “Auto”, playback is
automatically performed in the DENON LINK 3rd mode.
When the input mode is set to “HDMI”, normal HDMI playback is
performed.
When the input mode is set to “Digital”, playback is fixed to the
DENON LINK 3rd mode and BDs cannot be played.
•
•
•
•
•
When playing DSD signals in the DIRECT or PURE DIRECT mode,
the DSD signals are converted as such into analog signals. When
playing in other surround modes, the DSD signals are first converted
into PCM format, then into analog signals.
“DSD DIRECT” is shown on the display when playing DSD 2-
channel signals in the DIRECT mode. “DSD MULTI DIRECT” is
shown on the display when playing DSD multi-channel signals in the
DIRECT mode.
•
•
1
Either assign the input source to be used to “HDMI”
or assign “D.LINK” at the “Digital” setting (vpage
47 “Input Assign”).
2
Either turn <SOURCE SELECT> or press [INPUT
SOURCE SELECT] to select the input source assigned
in step 1.
The “ ” or “ ” indicator lights on the display.
3
Use <INPUT MODE> to select the input mode
(vpage 49 “Input Mode”).
Select the input mode according to the program source to be
played.
4
Select the surround mode (vpage 66 “Selecting the
surround mode).
We recommend playing in the DIRECT mode.b
5
Start playing the Super Audio CD.
The “ ” indicator lights on the display.
For operating instructions, refer to the respective equipment’s
operating instructions.
b
1
Assign “HDMI” to the input source to be used, and
assign “D.LINK” to the “Digital” setting (vpage
47 “Input Assign”).
2
Set “HDMI Control” – “Control” (vpage 37) to
“ON”.
3
Either turn <SOURCE SELECT> or press [INPUT
SOURCE SELECT] to select the input source assigned
in step 1.
The “ ” indicator lights on the display.
4
Select “AUTO” for the <INPUT MODE> (vpage 49
“Input Mode”).
5
Select the surround mode (vpage 66 “Selecting the
Surround Mode (Surround Mode)”).
6
Start playing the BD.
Playback starts.
Button located on both the main unit
and the remote control unit BUTTON
Button only on the main unit <BUTTON>
Button only on the remote control unit [BUTTON]
Symbols used to indicate buttons in this manual
Other Operations
Playing a Blu-ray Disc Player Compatible
with DENON LINK 4th
Playing Super Audio CD
Playback
<SOURCE SELECT>
<INPUT MODE>
[INPUT
SOURCE
SELECT]
[ MAIN]