Operating instructions
56
Basic Operation
• There are four Dolby Surround Pro Logic modes (NORMAL,
PHANTOM, WIDE and 3 STEREO). The AVR-4806 sets the
mode automatically according to the types of speakers set
during the system setup process ( page 113, 114).
SURROUND
PARAMETER
STANDARD
ENTER
CURSOR
STANDARD
SURROUND
SURROUND
PARAMETER
ENTER
CURSOR
2 Surround parameters r
Pro Logic IIx and Pro Logic II Mode:
Select one of the modes (“Cinema”, “Music”, “Pro Logic”
or “Game”).
The Cinema mode is for use with stereo television shows
and all programs encoded in Dolby Surround.
The Music mode is recommended for stereo music and
surround-encoded stereo music sources.
The Pro Logic mode emulates Dolby Laboratories’ original
Dolby Pro Logic surround decoding, and may provide better
results with older, legacy surround-encoded program
material.
The Game mode is optimized for computer and/or
dedicated game box consoles, that feature stereo analog or
digital outputs. It can only be used with 2-channel stereo
sources.
DIMENSION:
This control gradually adjust the soundfield either towards
the front or towards the rear.
The control can be set in 7 steps from 0 to 6.
CENTER WIDTH:
This control adjust the center image so it may be heard only
from the center speaker; only from the left/right speakers
as a phantom image; or from all three front speakers to
varying degrees.
The control can be set in 8 steps from 0 to 7.
PANORAMA:
This mode extends the front stereo image to include the
surround speakers for an exciting “wraparound” effect
with side wall imaging.
Select “OFF” or “ON”.
When set with the on screen display using the remote
control unit while in the MUSIC mode, set the “ ”
mark to “OPTIONS
0
” pressing the CURSOR
DD
or
HH
button, then press the CURSOR
FF
button.
Press the ENTER button to return to the previous
screen.
6
Press the CURSOR
FF
or
GG
button to adjust the
parameters setting.
DEFAULT setting:
Press the CURSOR
FF
button to select “Default
Yes
0
”, then parameters set to default setting.
7
Press the ENTER or SURROUND PARAMETER
button to complete the setting.
5
Press the CURSOR
DD
or
HH
button to select the
various surround parameters.
Example: DOLBY PLIIx music mode screen