Operation Manual
10
Connecting a Video Component Equipped with Color Difference (Component - Y, P
R
/C
R
,
P
B
/C
B
) Video Jacks (DVD Player)
• When making connections, also refer to the operating instructions of the other components.
• The signals input to the color difference (component) video jacks are not output from the VIDEO output jack (yellow) or the S-Video output jack.
• Some video sources with component video outputs are labeled Y, PB, PR, or Y, CB, CR, or Y, R-Y, B-Y. These terms all refer to component video
color difference output.
SURR.-B
SURR.-A
FRONT
L
L
L
IN
DVD
Y
VDP TV DBS /
V. AUX VCR-1 VCR-2 VCR-3 VCR-1 VCR-2 VCR-3
12SAT
MONITOR
AC IN
IN
TV
Y
IN
DBS / SAT
Y
OUT
MONITOR
P
B
/C
B
P
R
/C
R
P
B
/C
B
P
R
/C
R
P
B
/C
B
P
R
/C
R
P
B
/C
B
P
R
/C
R
Y
Y PRPB
B
B
VIDEO OUT
PR
Y
PB
COMPONENT
VIDEO IN
COMPONENT
DVD player
Monitor TV
Connecting a DVD player
Connecting a monitor TV
DVD IN jacks
• Connect the DVD player’s color difference
(component) video output jacks (COMPONENT VIDEO
OUTPUT) to the COMPONENT DVD IN jack using 75 Ω/
ohms coaxial video pin-plug cords.
• In the same way, another video source with component
video outputs such as a DTV/DBS tuner, etc., can be
connected to the TV/DBS color difference (component)
video jacks.
MONITOR OUT jack
• Connect the TV’s color difference (component)
video input jacks (COMPONENT VIDEO INPUT)
to the COMPONENT MONITOR OUT jack using
75 Ω/ohms coaxial video pin-plug cords.
• The color difference input jacks may be indicated differently on some
TVs, monitors or video components (“P
R, PB and Y”, “R-Y, B-Y and Y”,
“C
R, CB and Y”, etc.). For details, carefully read the operating
instructions included with the TV or other component.
MONITOR OUT jacks
The AVR-5803 is equipped with a function for up-converting video signals.
Because of this, the AVR-5803’s MONITOR OUT jack can be connected to the monitor (TV) with a single cable offering a higher quality connection,
regardless of how the player and the AVR-5803’s video input jacks are connected.
Generally speaking, connections using the component video jacks offer the highest quality playback, followed by connections using the S-Video
jacks, then connections using the regular video jacks (yellow).
If the AVR-5803’s MONITOR OUT jack is not connected to the monitor (TV) using the component video jacks, connect the player to the AVR-
5803’s video input jacks using either the video jacks (yellow) or the S-Video jacks. The video signals will not be output if the player and the
AVR-5803 are only connected with the component video jacks.