Operation Manual
54
Dolby Digital mode (only with digital input) and DTS Surround (only with digital input)
1
Select the input source.
INPUT SELECTOR
(Main unit) (Remote control unit)
q Select an input source set to digital (COAXIAL/OPTICAL)
(see page 29).
INPUT
MODE
(Main unit) (Remote control unit)
w Set the input mode to “AUTO”.
2
Select the Surround mode.
DOLBY
SURROUND
DTS
SURROUND
(Main unit) (Remote control unit)
3
Play a program source with the , mark.
1-w 2
1-q 3 3
1-q
1-w
2
2
4, 6
5
Playback with digital input
4
Display the surround parameter
menu.
5
q Select the various parameters.
6
Press the “SURR. PARA” button to complete the setting.
NOTE:
• When “Default” is selected and the jog stick is moved to the left, “CINEMA EQ.” and “D.COMP.” are automatically turned off, “SB CH
OUT” is reset, “CHANNEL LEVEL” and the tone is set to the default value.
(Remote control unit)
(Remote control unit)
(Remote control unit)
DIGITAL
• The DTS indicator lights when playing
DTS sources.
Light
Light
SIGNAL
DETECT
• The SIGNAL DETECT indicator lights
when playing sources on which a
special identification signal is
recorded.
Light
• The Dolby Digital indicator lights
when playing Dolby Digital sources.
w Adjust the parameter settings.
(Remote control unit)