User's Guide

ENGLISH
50
Advanced Setup – Part 2 Advanced Setup – Part 2
ENGLISH
1
Press the CURSOR
DD
or
HH
button to select
“Auto Setup/Room EQ” at the “System Setup”
menu, then press the ENTER button.
• The “Auto Setup/Room EQ” menu appears.
Setting the Manual EQ Setup
Others Setup
Adjust the tone of the various speakers except subwoofer
speaker while listening to the sound (music).
2
Press the CURSOR
DD
or
HH
button to select
“Manual EQ Setup”, then press the ENTER
button.
• The “Manual EQ Setup” screen appears.
4
Press the CURSOR
DD
or
HH
button to select the
frequency.
6
Press the ENTER button to enter the setting.
• The “Auto Setup/Room EQ” menu appears.
3
Press the CURSOR
FF
or
GG
button to select the
speaker to be set.
The display changes as follows.
FL
1sp
FR
C
SL
SBL
SBR
SB
SR
When the surround back speaker setting is set to “1sp” at
“Speaker Configuration”, this is set to “SB”.
5
Press the CURSOR
FF
or
GG
button to to adjust
the gain level.
Each frequency can be adjusted the range from –6 dB to +6
dB in 0.5 dB step.
1
Press the CURSOR
DD
or
HH
button to select
“Room EQ Setup” at the “Auto Setup/Room
EQ” menu, then press the ENTER button.
• The “Room EQ Setup” screen appears.
Setting the Room EQ Setup
Select the setting of an Equalizer that has been set with “Auto
Setup” or “Manual EQ”.
3
-1
When “All” is selected:
Press the ENTER button.
• The “Select The EQ Curve” screen appears.
2
Press the CURSOR
FF
or
GG
button to select “All”
or “Assign”.
All:
The Equalizer to all surround mode is set as once.
Assign:
The Equalizer to each surround mode is to set individually.
3
-2
When “All” is selected:
Press the CURSOR
FF
or
GG
button to select the
equalizer setting.
OFF:
The Equalizer is not used.
Flat:
Adjust the frequency response of all speakers flat.
Normal:
Adjust the frequency response of all speaker suitable for
general surround system.
Manual:
Selects the setting value that was set in the Manual EQ
setup.
Front:
Adjusts the characteristics of each speaker to the
characteristics of the front speakers.
4
Press the ENTER button to enter the setting.
• The “Auto Setup/Room EQ” menu appears.