Operating instructions

48
Advanced Setup – Part 1 Advanced Setup – Part 1
Setting the Input Function Level
Press
DD HH
to select “Input Function Lev.”, then
press ENTER.
• After completing this setting, check that the playback levels for
the different sources are the same.
1
Press
DD HH
to select the input source, then press
FF
GG
to set.
The volume can be adjusted within the range –12 dB to +12
dB.
2
Press ENTER.
3
1
2
Setting the Function Rename
Press
DD HH
to select “Function Rename”, then
press ENTER.
Press
DD HH
to select the input function, then press
FF GG
to set.
Press
FF GG
to move the cursor (
22
) to the desired
position, then press
DD HH
to select the character.
Up to 8 characters can be input.
The characters that can be input are shown below.
AB C D E F G H I J K L M N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m n o p q r s t u v w x y z 0 1 2 3 4
5 6 7 8 9
! ” # % & ’ ( )
*
+ , – . / : ; < = > ? @ [ \ ] (space)
Repeat step 3 to input the input source name.
To set the input function name back to how it was:
q Press
FF GG
to highlight the input function name, then
press
DD HH
.
w Press
DD HH
to select “Default Yes”, then press
FF
.
Once all the characters have been input, press
ENTER.
1
2
3
4
5
1
2
The playback level is corrected individually for the different input
sources.
The name of the input function that is displayed can be changed.
Setting the Tuner Presets
2 Auto Preset Memory
Up to 56 FM stations can be preset automatically.
Press
DD HH
to select “Tuner Presets”, then press
ENTER.
Press
DD HH
to select “Auto Preset Memory”, then
press ENTER.
Press
FF
to select “Yes”.
•“Search” blinks on the screen and searching begins.
• “Completed” appears once searching is completed.
• If an FM station cannot be preset automatically due to poor
reception, use the “Manual tuning” operation ( page 35) to
tune in the station, then preset it using the manual “Preset
memory” operation ( page 35).
1
2
3
1
2
3
3
4