Operating instructions

60
Advanced Setup – Part 2 Advanced Setup – Part 2
Others Setup
Setting the Room Equalizer Setup
Set the Room Equalizer setting with “All” or “Assign” for each
surround mode.
Press
FF GG
to set, then press ENTER.
All:
Sets the equalizer for all surround modes.
Assign:
Sets the equalizer individually for each surround mode (
page 24).
Setting the Direct Mode Setup
Set the ON/OFF setting of Room Equalizer, in the case of the
surround mode is in “Direct” or “Pure Direct”.
Press
DD HH
to select “Direct Mode Setup”, then
press ENTER.
Press
FF GG
to set.
When “All” is selected:
Press
FF GG
to set.
OFF:
The equalizer is not used.
Audyssey:
Adjusts the frequency response of all speakers to correct the
effects of room acoustics.
Front:
Adjusts the frequency response of the surround speakers to
match the characteristics of the front channel speakers.
Flat:
Adjusts the frequency response of all speakers to the flattest
response. This mode is suitable for multi-channel music
surround sound sources.
Manual:
Selects the setting value that was set in the “Setting the
Manual Equalizer Setup” ( page 53, 54).
• The equalizer setting of “Audyssey”, “Front” and “Flat” can be
selected after performing the Auto Setup.
• When the speaker set as “None” with the Auto Setup is
changed to on manually, the equalizer of “Audyssey”, “Front”
and “Flat” cannot be used.
• When headphones are connected, the Room Equalizer cannot
be used.
1
2
Press
DD HH
to select “Room EQ Setup”, then press
ENTER.
1
2
3
1
2
3
ON, OFF:
Select “ON” to use the room equalizer, “OFF” if you do not
want to use it.
Press ENTER.
3
1
2
Press ENTER.
4