User's Guide
Table Of Contents
- Features
- Accessories
- Part names and functions
- Connections
- Playback
- Basic operation
- Playing an iPod
- Playing a USB memory device
- Listening to FM/AM broadcasts
- Listening to FM/AM broadcasts
- Tuning in by entering the radio frequency (Direct Tune)
- Changing the tuning mode (Tune Mode)
- Listening to preset stations
- Presetting the current broadcast station (Preset Memory)
- Tuning in to radio stations and presetting them automatically (Auto Preset)
- Specify a name for the preset broadcast station (Preset Name)
- Skipping preset broadcast stations (Preset Skip)
- Cancelling preset skip
- Listening to Internet Radio
- Playing back files stored on a PC and NAS
- Viewing photographs on the Flickr site
- Listening to Pandora®
- Listening to SiriusXM Internet Radio
- Listening to Spotify
- Adding to the FAVORITE STATION button
- AirPlay function
- Convenience functions
- Performing repeat playback (Repeat)
- Performing random playback (Random)
- Add to favorites from the Option menu (Save to Favorites)
- Playing back content added in “Save to Favorites”
- Deleting content added to favorites (Remove from Favorites)
- Searching content with keywords (Text Search)
- Playing back music and a favorite picture at the same time (Slideshow)
- Playing back still pictures in sequential order (Slideshow Interval)
- Displaying your desired video during audio playback (Video Select)
- Playing music in All Zone Stereo
- Selecting a sound mode
- HDMI control function
- Sleep timer function
- Quick select function
- Web control function
- Playback in ZONE2 (Separate room)
- Settings
- Tips
- Appendix
- About HDMI
- Playing back USB memory devices
- Playing back files stored on PC or NAS
- Playing back Internet Radio
- Personal memory plus function
- Last function memory
- Sound modes and channel output
- Sound modes and surround parameters
- Types of input signals, and corresponding sound modes
- Explanation of terms
- Trademark information
- Specifications
- Index
- License
143
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
Error messages
An error message is displayed if Audyssey® Setup could not be completed due to speaker placement, the measurement environment, etc. If an error
message is displayed, check the relevant items and perform the necessary measures. Be sure to turn o the power before checking speaker connections.
Examples Error details Measures
Microphone or Speaker is
None
•Setup and measurement microphone is not
detected.
•Not all speakers could be detected.
•Connect the included Setup and measurement microphone to the
SETUP MIC jack of this unit.
•Check the speaker connections.
Ambient noise is too high or
level is too low
•There is too much noise in the room.
•Speaker or subwoofer sound is too low.
•Either turn o any device generating noise or move it away.
•Perform again when the surroundings are quieter.
•Check the speaker installation and the direction in which the
speakers are facing.
•Adjust the subwoofer’s volume.
Front R : None •The displayed speaker could not be
detected.
•Check the connections of the displayed speaker.
Front R : Phase •The displayed speaker is connected with
the polarity reversed.
•Check the polarity of the displayed speaker.
•For some speakers, this error message may be displayed even if
the speaker is properly connected. If you are sure the connection is
correct, use p to select “Skip Error”, then press ENTER.