User's Guide
Table Of Contents
- Features
- Accessories
- Part names and functions
- Connections
- Playback
- Basic operation
- Playing an iPod
- Playing a USB memory device
- Listening to FM/AM broadcasts
- Listening to FM/AM broadcasts
- Tuning in by entering the radio frequency (Direct Tune)
- Changing the tuning mode (Tune Mode)
- Listening to preset stations
- Presetting the current broadcast station (Preset Memory)
- Tuning in to radio stations and presetting them automatically (Auto Preset)
- Specify a name for the preset broadcast station (Preset Name)
- Skipping preset broadcast stations (Preset Skip)
- Cancelling preset skip
- Listening to Internet Radio
- Playing back files stored on a PC and NAS
- Viewing photographs on the Flickr site
- Listening to Pandora®
- Listening to SiriusXM Internet Radio
- Listening to Spotify
- Adding to the FAVORITE STATION button
- AirPlay function
- Convenience functions
- Performing repeat playback (Repeat)
- Performing random playback (Random)
- Add to favorites from the Option menu (Save to Favorites)
- Playing back content added in “Save to Favorites”
- Deleting content added to favorites (Remove from Favorites)
- Searching content with keywords (Text Search)
- Playing back music and a favorite picture at the same time (Slideshow)
- Playing back still pictures in sequential order (Slideshow Interval)
- Displaying your desired video during audio playback (Video Select)
- Playing music in All Zone Stereo
- Selecting a sound mode
- HDMI control function
- Sleep timer function
- Quick select function
- Web control function
- Playback in ZONE2 (Separate room)
- Settings
- Tips
- Appendix
- About HDMI
- Playing back USB memory devices
- Playing back files stored on PC or NAS
- Playing back Internet Radio
- Personal memory plus function
- Last function memory
- Sound modes and channel output
- Sound modes and surround parameters
- Types of input signals, and corresponding sound modes
- Explanation of terms
- Trademark information
- Specifications
- Index
- License
150
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
Settings
Make settings for wired LAN.
•If you are using a broadband router (DHCP function), there is no need
to make the settings at “IP Address” and “Proxy”, since the DHCP
function is set to “On” in this unit’s default settings.
•Only set “Settings” when connecting to a network without a DHCP
function.
DHCP
Settings
-IP Address
-Subnet Mask
-Default Gateway
-Primary DNS
-Secondary DNS
Off
192.
168.
000.
001
255.
255.
255.
000
000.
000.
000.
000
000.
000.
000.
000
000.
000.
000.
000
Proxy
-Name
-Port
Off
00000
Save
Cancel
2 DHCP
Selects how to connect to the network.
On : Configure the network settings automatically from your router.
O : Configure the network settings manually.
2 IP Address
Set the IP address within the ranges shown below.
•The Network Audio function cannot be used if other IP addresses
are set.
CLASS A: 10.0.0.1 – 10.255.255.254
CLASS B: 172.16.0.1 – 172.31.255.254
CLASS C: 192.168.0.1 – 192.168.255.254
2 Subnet Mask
When connecting an xDSL modem or connector adapter directly to this
unit, input the subnet mask indicated in the documentation supplied by
your provider. Normally input 255.255.255.0.
2 Default Gateway
When connected to a gateway (router), input its IP address.
2 Primary DNS, Secondary DNS
If there is only one DNS address indicated in the documentation
supplied by your provider, input it at “Primary DNS”. If two or more
DNS are provided by your provider, enter both “Primary DNS” and
“Secondary DNS”.