User's Guide
Table Of Contents
- Features
- Accessories
- Part names and functions
- Connections
- Playback
- Basic operation
- Playing an iPod
- Playing a USB memory device
- Listening to FM/AM broadcasts
- Listening to FM/AM broadcasts
- Tuning in by entering the radio frequency (Direct Tune)
- Changing the tuning mode (Tune Mode)
- Listening to preset stations
- Presetting the current broadcast station (Preset Memory)
- Tuning in to radio stations and presetting them automatically (Auto Preset)
- Specify a name for the preset broadcast station (Preset Name)
- Skipping preset broadcast stations (Preset Skip)
- Cancelling preset skip
- Listening to Internet Radio
- Playing back files stored on a PC and NAS
- Viewing photographs on the Flickr site
- Listening to Pandora®
- Listening to SiriusXM Internet Radio
- Listening to Spotify
- Adding to the FAVORITE STATION button
- AirPlay function
- Convenience functions
- Performing repeat playback (Repeat)
- Performing random playback (Random)
- Add to favorites from the Option menu (Save to Favorites)
- Playing back content added in “Save to Favorites”
- Deleting content added to favorites (Remove from Favorites)
- Searching content with keywords (Text Search)
- Playing back music and a favorite picture at the same time (Slideshow)
- Playing back still pictures in sequential order (Slideshow Interval)
- Displaying your desired video during audio playback (Video Select)
- Playing music in All Zone Stereo
- Selecting a sound mode
- HDMI control function
- Sleep timer function
- Quick select function
- Web control function
- Playback in ZONE2 (Separate room)
- Settings
- Tips
- Appendix
- About HDMI
- Playing back USB memory devices
- Playing back files stored on PC or NAS
- Playing back Internet Radio
- Personal memory plus function
- Last function memory
- Sound modes and channel output
- Sound modes and surround parameters
- Types of input signals, and corresponding sound modes
- Explanation of terms
- Trademark information
- Specifications
- Index
- License
21
Appendix
TipsSettingsPlayback
Contents
Front panel Display Rear panel IndexRemote
Connections
Speaker connection
Here we connect the speakers in the room to this unit.
This section explains how to connect them using typical examples.
NOTE
•Disconnect this unit’s power plug from the power outlet before connecting the
speakers. Also, turn o the subwoofer.
•Connect so that the speaker cable core wires do not protrude from the speaker
terminal. The protection circuit may be activated if the core wires touch the rear
panel or if the + and – sides touch each other (vpage191 “Protection circuit”).
•Never touch the speaker terminals while the power cord is connected. Doing so
could result in electric shock. When the “Setup Assistant” is running, follow the
instructions in the “Setup Assistant” screen for making connections. (Power is not
supplied to the speaker terminals while the “Setup Assistant” is running.)
•Use speakers with an impedance of 6 – 16 Ω/ohms.
2 Connecting the speaker cables
Carefully check the left (L) and right (R) channels and + (red) and –
(black) polarities on the speakers being connected to this unit, and be
sure to connect the channels and polarities correctly.
1
Peel o about 3/8 inch (10 mm) of
sheathing from the tip of the speaker
cable, then either twist the core wire
tightly or terminate it.
2
Turn the speaker terminal counterclockwise
to loosen it.
3
Insert the speaker cable’s core wire to the
hilt into the speaker terminal.
4
Turn the speaker terminal clockwise to
tighten it.