Protocol Specs

- 17 -
COMMAND
PARAMETER
function example
PS BAS UP BASS UP/DOWN , direct change to **dB PSBAS UP<CR> BAS DOWN **:00 to 99 by ASCII , 50=0dB PSBAS DOWN<CR> BAS ** ---AVR-X2000/E400 can be operated from -6 to +6(44 to 56)
PSBAS 50<CR>
BAS ? Return PSBAS Status PSBAS ?<CR> TRE UP TREBLE UP/DOWN , direct change to **dB PSTRE UP<CR> TRE DOWN **:00 to 99 by ASCII , 50=0dB PSTRE DOWN<CR> TRE ** ---AVR-X2000/E400 can be operated from -6 to +6(44 to 56)
PSTRE 50<CR>
TRE ? Return PSTRE Status PSTRE ?<CR> DRC AUTO Dynamic Compression direct change PSDRC AUTO<CR> DRC LOW PSDRC LOW<CR> DRC MID PSDRC MID<CR> DRC HI PSDRC HI<CR> DRC OFF PSDRC OFF<CR> DRC ? PSDRC ?<CR> LFE UP LFE UP/DOWN , direct change to **dB PSLEE UP<CR> LFE DOWN **:00 to 99 by ASCII , 00=0dB, 10=-10dB PSLFE DOWN<CR> LFE ** ---AVR-X2000/E400 can be operated from 0 to -10 PSLFE 10<CR> LFE ? Return PSLFE Status PSLFE ? <CR> EFF UP EFFECT UP/DOWN , EFFECT LEVEL direct change to **dB PSEFF UP<CR> EFF DOWN **:00 to 99 by ASCII , 00=0dB, 10=10dB PSEFF DOWN<CR> EFF ** ---AVR-X2000/E400 can be operated from 1 to 15 PSEFF 10<CR> EFF ? Return PSEFF Status PSEFF ?<CR> DEL UP DELAY UP/DOWN , direct change to ***dB PSDEL UP<CR> DEL DOWN ***:000 to 999 by ASCII , 000=0ms, 300=300ms PSDEL DOWN<CR> DEL *** ---AVR-X2000/E400 can be operated from 0 to 300 PSDEL ***<CR> DEL ? Return PSDEL Status PSDEL ?<CR>
PS COMMAND : "*" parameter uses two or three ASCII characters. (see page6 J) section)