Operation Manual

Output Settings

Makes settings for video output.

“Output Settings” cannot be set when 4K signals are input.

“i/p Scaler”, “Resolution”, “Progressive Mode” and “Aspect Ratio” settings are

stored for each input source. (

“i/p Scaler” (v

p. 166), “Resolution” (v p. 167),

“Progressive Mode” (v p. 167), “Aspect Ratio” (v p. 168))

HDMI Video Output

Select the HDMI monitor connector to be used.

Auto(Dual)

(Default):

The presence of a TV connected to the

HDMI MONITOR 1 or HDMI MONITOR 2

connector is detected automatically, and

that TV connection is used.

Monitor 1:

A TV connected to the HDMI MONITOR

1 connector is always used.

Monitor 2:

A TV connected to the HDMI MONITOR

2 connector is always used.

If both the HDMI MONITOR 1 and HDMI MONITOR 2 connectors are

connected and “Resolution” is set to “Auto”, the signals are output with a

resolution that is compatible with both TVs.

p. 167)

When the “Resolution” setting in the menu is not set to “Auto”, set the

resolution in “Video” - “HDMI Monitor 1” and “HDMI Monitor 2” to one that is

compatible with both TVs.

p. 213)

You can check which resolutions are compatible with your TV in “HDMI

Monitor 1” and “HDMI Monitor 2”.

p. 213)

Contents Connections Playback Settings Tips Appendix

165

Front panel Display Rear panel Remote Index