Operation Manual

162

Appendix

TipsPlaybackConnections

Contents

Front panel Display Rear panel IndexRemote

Settings

Manual Setup

Perform when setting the speakers manually or when changing settings

made in Audyssey® Setup.

•If you change the speaker settings after performing Audyssey® Setup, it

will not be possible to select Audyssey MultEQ® XT, Audyssey Dynamic

EQ® and Audyssey Dynamic Volume® (vpage139, 140).

•“Manual Setup” can be used without changing the settings. Please set

if necessary.

Amp Assign

Select power ampliﬁer usage method to match your speaker system.

2 Assign Mode

Set the assignment mode.

Surround Back : Setting for 7.1-channel playback using surround back

speakers.

ZONE2 (Default) : Setting to assign the unit’s built-in power ampliﬁer

for ZONE2 and output the audio in stereo.

Bi-AMP : Setting to use the front speakers via the bi-amp connection.

Front B : Setting to use the second set of front speakers for playback.

You can switch the front speakers A and B to be used for

playback in accordance with the 2-channel playback or multi-

channel playback mode. When you select this Front B setting,

also perform the “Front Speaker Setup” (vpage 167)

procedure.

Front Height : Setting for 7.1-channel playback using front height

speakers.

Front Wide : Setting for 7.1-channel playback using front wide

speakers.