Connections Playback Settings Tips .
Contents Connections Playback Settings 8 9 9 10 10 11 15 16 16 19 21 25 Accessories Inserting the batteries Operating range of the remote control unit Features High quality sound High performance Easy operation Part names and functions Front panel Display Rear panel Remote control unit Front panel Display Rear panel Appendix Connecting a TV Connection 1 : TV equipped with an HDMI connector and compatible with the ARC (Audio Return Channel) Connection 2 : TV equipped with an HDMI connector and incom
Contents Connections Playback Settings Playback Basic operation Turning the power on Selecting the input source Adjusting the volume Turning off the sound temporarily (Muting) Playback a DVD player/Blu-ray Disc player Playing a USB memory device Playing files stored on USB memory devices Listening to music on a Bluetooth device Playing music from Bluetooth device Pairing with other Bluetooth devices Reconnecting to this unit from a Bluetooth device Listening to FM/AM broadcasts Listening to FM/AM broadc
Contents Connections Playback Convenience functions Adding to HEOS Favorites Playing back HEOS Favorites Deleting a HEOS Favorites Adjusting the volume of each channel to match the input source (Channel Level Adjust) Adjusting the tone (Tone) Displaying your desired video during audio playback (Video Select) Adjusting the picture quality for your viewing environment (Picture Mode) Playing the same music in all zones (All Zone Stereo) Selecting a sound mode Selecting a sound mode Direct playback Pure Dire
Contents Connections Playback 156 156 158 163 166 167 168 169 169 171 172 172 172 173 173 175 181 183 Video Picture Adjust HDMI Setup Output Settings On Screen Display 4K Signal Format TV Format Inputs Input Assign Source Rename Hide Sources Source Level Input Select Speakers Audyssey® Setup Procedure for speaker settings (Audyssey® Setup) Error messages Retrieving Audyssey® Setup settings Front panel Display Settings Rear panel Tips 184 184 185 190 191 192 193 194 195 195 195 196 198 200 200 201
Contents Connections Playback HEOS Account You have not signed in You have already signed in General Language ECO ZONE2 Setup Zone Rename Quick Select Names Trigger Out Front Display Firmware Information Usage Data Save & Load Setup Lock Limiting the operating zone with the remote control Front panel Display Rear panel Settings Tips Appendix Tips 202 202 202 203 203 203 206 208 208 209 209 210 213 214 215 215 216 Tips Troubleshooting Power does not turn on / Power is turned off Operations cannot
Contents Connections Playback Settings Tips Appendix About HDMI Video conversion function Playing back a USB memory devices Playing back a Bluetooth device Playing back a file saved on a PC or NAS Playing back Internet Radio Personal memory plus function Last function memory Sound modes and channel output Sound modes and surround parameters Types of input signals, and corresponding sound modes Explanation of terms Trademark information Specifications Index License Front panel Display Rear panel 241
Contents Connections Playback Settings Tips Appendix Thank you for purchasing this Denon product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference. Accessories . Check that the following parts are supplied with the product.
Connections Contents Playback Settings Inserting the batteries 1 Tips Appendix NOTE 0 To prevent damage or leakage of battery fluid: 0 Do not use a new battery together with an old one. 0 Do not use two different types of batteries. 0 Remove the batteries from the remote control unit if it will not be in use for long periods. 0 If the battery fluid should leak, carefully wipe the fluid off the inside of the battery compartment and insert new batteries.
Contents Connections Playback Settings Tips Appendix Features 0 Audyssey LFC™ (Low Frequency Containment) (v p. 153) High quality sound Audyssey LFC™ solves the problem of low frequency sounds disturbing people in neighboring rooms or apartments. Audyssey LFC™ dynamically monitors the audio content and removes the low frequencies that pass through walls, floors and ceilings. It then applies psychoacoustic processing to restore the perception of low bass for listeners in the room.
Contents Connections Playback Settings Tips Appendix 0 Digital video processor upscales analog video signals (SD High performance resolution) to HD (720p/1080p) and 4K (v p. 165) 0 4K 60Hz input/output supported 4K Up scaling . Up to 1080p . This unit is equipped with a 4K video upscaling function that allows analog video or SD (Standard Definition) video to be output via HDMI at 4K (3840 × 2160 pixels) resolution.
Contents Connections Playback Settings 0 HDMI connections enable connection to various digital AV Tips Appendix 0 The device is equipped with a AirPlay® function in addition to devices (8 inputs, 3 outputs) network functions such as Internet radio etc. (v p. 102) 8 3 Out . . In You can enjoy a wide variety of content, including listening to Internet Radio, playing audio files stored on your PC.
Contents Connections Playback Settings 0 Wireless connection with Bluetooth devices can be carried out Tips Appendix 0 Multi-Room audio (v p. 113) easily (v p. 75) GZONE2H . GMAIN ZONEH . You can select and play back the respective inputs in MAIN ZONE and ZONE2. In addition, when the All Zone Stereo function is used, the music being played back in MAIN ZONE can be enjoyed in all the zones at the same time. This is useful when you want to let the BGM propagate throughout the whole house.
Contents Connections Playback Settings Tips Appendix 0 HEOS provides streaming music from your favorite online music 0 Compatible with the “Denon 2016 AVR Remote” Appz for sources . performing basic operations of the unit with an iPad, iPhone or Android™ devices (Google, Amazon Kindle Fire) . Along with many new features, the graphics and user interface have been completely overhauled.
Contents Connections Playback Settings Tips Easy operation 0 “Setup Assistant” provides easy-to-follow setup instructions First select the language when prompted. Then simply follow the instructions displayed on the TV screen to set up the speakers, network, etc. 0 Easy to use Graphical User Interface This unit is equipped with a Graphical User Interface for improved operability.
Contents Connections Playback Settings Tips Appendix Part names and functions Front panel qw e r t u i o Q0 . Q3 y Q1 Q4 Q2 Q5 Q6 For details, see the next page.
Contents qw Connections e r Playback t Settings y Tips Appendix C SOURCE SELECT knob This selects the input source. (v p. 69) D Remote control sensor This receives signals from the remote control unit. (v p. 9) ioQ0 Q1 F MASTER VOLUME knob This adjusts the volume level. (v p. 70) G Tuner preset channel buttons (TUNER PRESET CH +, –) These select preset broadcast stations. (v p. 83) . u E Display This displays various pieces of information. (v p.
Contents Connections Playback Settings Tips Appendix N AUX1-HDMI connector This is used to connect HDMI output compatible devices such as video camcorders and game consoles. (v p. 59) O USB port (T) This is used to connect USB storages (such as USB memory devices). (v p. 60) Q2 . Q3 Q4 Q5 P SETUP MIC jack This is used to connect the supplied Sound calibration microphone. (v p.
Contents Connections Playback Settings Tips Appendix Display w e r A Input mode indicators These light according to the audio input mode settings of each input source. (v p. 172) i o Q1 Q2 G Circle indicator This is displayed when the input source is “HEOS Music” when you are playing back music. D Audyssey® indicator This lights when “MultEQ® XT32”, “Dynamic EQ”, “Dynamic Volume” or “Audyssey LFCTM” has been set up. (v p.
Contents Connections Playback Settings Tips i o . Q0 Q1 Q2 H Volume indicator I MUTE indicator This blinks while the sound is muted. (v p. 70) J Information display The input source name, sound mode, setting values and other information are displayed here. K Input signal indicators The respective indicator will light corresponding to the input signal. (v p. 172) L ZONE2 indicator This lights up when ZONE2 (separate room) power is turned on. (v p.
Connections Contents Playback Settings Tips Appendix Rear panel q . i we o Q0 r Q1 t q y Q2 Q3 Q4 For details, see the next page.
Contents Connections Playback q w er Settings q Tips Appendix 0 The antenna clip can be removed from the rear panel. A Rotate the antenna clip 90 degrees to the left. B Pull the antenna clip out towards yourself. 0 The antenna clip is needed when transporting this unit. Keep it in a safe place. 0 Attach the antenna clip by following the steps for removing it in reverse.
Contents Connections t Playback y Settings Tips Appendix F HDMI connectors Used to connect devices equipped with HDMI connectors. 0 “Connection 1 : TV equipped with an HDMI connector and compatible with the ARC (Audio Return Channel)” (v p. 53) 0 “Connection 2 : TV equipped with an HDMI connector and incompatible with the ARC (Audio Return Channel)” (v p. 54) 0 “Connecting a set-top box (Satellite tuner/cable TV)” (v p. 57) 0 “Connecting a DVD player or Blu-ray Disc player” (v p.
Contents Connections Playback Settings Tips Appendix L Speaker terminals (SPEAKERS) Used to connect speakers. (v p. 36) . M PRE OUT connectors Used to connect a subwoofer with built-in amplifier or an external power amplifier. 0 “Connecting the subwoofer” (v p. 37) 0 “Connecting an external power amplifier” (v p. 51) 0 “Connection 3 : Connection using an external amplifier (ZONE2)” (v p.
Contents Connections Playback Settings Tips Appendix Remote control unit A ZONE SELECT buttons These switch the zone (MAIN ZONE, ZONE2) that is operated through the remote control unit. 0 “Playback in ZONE2” (v p. 136) 0 “Menu operations” (v p. 142) q B Input source select buttons These selects the input source. 0 “Selecting the input source” (v p. 69) 0 “Playback in ZONE2” (v p. 136) w C Channel/page search buttons (CH/PAGE df) These select radio stations registered to presets or switch pages.
Contents Connections Playback Settings Tips Appendix G BACK button This returns to the previous screen. H System buttons These perform playback related operations. Tuning up / Tuning down buttons (TUNE +, –) These select either FM broadcast or AM broadcast. (v p. 80) Q1 Q2 I QUICK SELECT buttons (1 – 4) These call up settings registered to each button, such as input source, volume level and sound mode settings. (v p. 131) J SOUND MODE buttons These select the sound mode. (v p.
Contents Connections Playback Settings Tips Appendix M POWER button (X) This turns the power on/off. 0 “Turning the power on” (v p. 69) 0 “Playback in ZONE2” (v p. 136) N ECO Mode button (G) This switches to ECO Mode. (v p. 203) Q3 O VOLUME buttons (df) These adjusts the volume level. 0 “Adjusting the volume” (v p. 70) 0 “Adjusting the volume (ZONE2)” (v p. 137) P OPTION button This displays the option menu on the TV screen. Q4 Q5 Q ENTER button This determines the selection.
Contents Connections Playback Settings o Contents Tips Appendix o Cables used for connections Provide necessary cables according to the devices you want to connect. 29 36 Connecting a TV 52 Connecting a playback device 56 Connecting a USB memory device to the USB port 60 61 Connecting to a home network (LAN) 63 Connecting an external control device 65 Connecting the power cord 67 Subwoofer cable HDMI cable . Connecting an FM/AM antenna Speaker cable . Connecting speakers .
Contents Connections Playback Settings Tips Appendix Speaker installation Determine the speaker system depending on the number of speakers you are using and install each speaker and subwoofer in the room. Speaker installation is explained using this example of a typical installation. FL SL SW2 SR SW1 SB SBR . SBL Front panel Display Rear panel Place the FRONT left and right speakers an equal distance from the main listening position.
Contents Connections TML TFL FHL Playback Settings Appendix Place the FRONT HEIGHT left and right speakers FHL/FHR directly above the front speakers. Mount them as (Front height speaker close to the ceiling as possible and aim them left/right): towards the main listening position. TMR TFR FHR TFL/TFR (Top front speaker left/right): Mount the TOP FRONT left and right speakers on the ceiling slightly in front of your main listening position and aligned with the left and right front speakers.
Contents Connections FDL Settings Tips FDR SDR Place the FRONT Dolby Atmos Enabled speaker FDL/FDR on the front speaker. For a Dolby Atmos Enabled (Front Dolby speaker integrated with a front speaker, place the Dolby Atmos Enabled speaker instead of the front left/right): speaker. SDL/SDR (Surround Dolby speaker left/right): Front panel Rear panel . Place the SURROUND Dolby Atmos Enabled speaker on the surround speaker.
Contents Connections Playback Settings Tips Appendix Height speakers layout 0 This unit is compatible with Dolby Atmos and DTS:X which offers an even wider and deeper surround sensation. 0 Dolby Atmos is not supported in a 5.1-channel or less speaker configuration. 0 DTS:X can be selected regardless of the speaker configuration. 0 Use the illustration below as a guide for how high each speaker should be installed. The height does not need to be exactly the same.
Contents Connections Playback Settings o When 7.1-channel speakers are installed using surround back speakers Tips Appendix o When 5.1-channel speakers are installed FR FL FR FL SW SW C z1 z2 z1 z2 z3 SL C SL SR . SR Listening position z1 22° - 30° z2 120° SBR . SBL z1 22° - 30° z2 90° - 110° z3 135° - 150° 0 When using a single surround back speaker, place it directly behind the listening position.
Contents Connections Playback Settings o Layout including height speakers and ceiling speakers Tips Appendix n Ceiling speaker layout example Combination of 5.1-channel layout and top middle speakers. n Height speaker layout example TML Combination of 5.1-channel layout and front height speakers. TMR FL FHL FHR FL SW FR C FR SW C SR . .
Contents Connections Playback Settings Tips n Dolby Atmos Enabled speaker layout example Combination of 5.1-channel layout and front Dolby speakers. FDL FL SW FDR C FR SR .
Contents Connections Playback Settings Tips Appendix Connecting speakers Here we connect the speakers in the room to this unit. Before connecting speakers NOTE NOTE 0 Disconnect this unit’s power plug from the power outlet before connecting the speakers. Also, turn off the subwoofer. 0 Connect so that the speaker cable core wires do not protrude from the speaker terminal. The protection circuit may be activated if the core wires touch the rear panel or if the + and - sides touch each other.
Contents Connections Playback Settings o Connecting the speaker cables Appendix o Connecting the subwoofer Carefully check the left (L) and right (R) channels and + (red) and – (black) polarities on the speakers being connected to this unit, and be sure to connect the channels and polarities correctly. Use a subwoofer cable to connect the subwoofer. Two subwoofers can be connected to this unit. To use two subwoofers, set “Subwoofer” to “2 spkrs” in the “Speaker Config.” setting. (v p.
Contents Connections Playback Settings o About the cable labels (supplied) for channel identification Speaker terminals FRONT L FRONT R CENTER SURROUND L SURROUND R SURROUND BACK L SURROUND BACK R FRONT HEIGHT L FRONT HEIGHT R ZONE2 L ZONE2 R TOP FRONT L TOP FRONT R TOP MIDDLE L TOP MIDDLE R FRONT DOLBY L FRONT DOLBY R SURROUND DOLBY L SURROUND DOLBY R SUBWOOFER The channel display section for speaker terminals on the rear panel is color-coded for each channel to be identifiable.
Contents Connections Playback Settings Tips Attach the cable label for each channel to its speaker cable as shown in the diagram. Refer to the table and attach the label to each speaker cable. Then, make connection so that the color of the speaker terminal matches that of the cable label. G How to attach the cable labels H Speaker .
Contents Connections Playback Settings Tips Appendix Speaker configuration and “Amp Assign” settings This unit has a built-in 7-channel power amplifier. In addition to the basic 5.1-channel system, a variety of speaker systems can be configured by changing the “Amp Assign” settings to suit the application, such as 7.1-channel systems, bi-amp connections and 2-channel systems for multi-zone playback. (v p.
Contents Connections Playback Settings Tips Appendix Connecting 5.1-channel speakers This serves as a basic 5.1-channel surround system. FL FR SW C SL . .
Contents Connections Playback Settings Tips Appendix Connecting 7.1-channel speakers System for 7.1-channel surround playback. o Example connections when using surround back speakers This 7.1-channel surround system is the same as a basic 5.1-channel system but with surround back speakers. FL FR SW C SL SR . SBR SW FR FL C SR SL SBR SBL . SBL 0 When using a single surround back speaker, connect it to the SURROUND BACK L terminal. 0 Set “Assign Mode” to “Surround Back” in the menu.
Contents Connections Playback Settings Tips Appendix o Example connections when using front height speakers This 7.1-channel surround system is the same as a basic 5.1-channel system but with front height speakers. FHL FHR FL FR SW C SL . . SR SW FR FL C SR 0 Set “Assign Mode” to “Front Height” in the menu. (v p.
Contents Connections Playback Settings Tips Appendix o Example connections when using top front speakers This 7.1-channel surround system is the same as a basic 5.1-channel system but with top front speakers. TFL TFR FL FR SW C SR . . SL SW FR FL C SR 0 Set “Assign Mode” to “Top Front” in the menu. (v p.
Contents Connections Playback Settings Tips Appendix o Example connections when using top middle speakers This 7.1-channel surround system is the same as a basic 5.1-channel system but with top middle speakers. TML TMR FL FR SW C SR . . SL SW FR FL C SR 0 Set “Assign Mode” to “Top Middle” in the menu. (v p.
Contents Connections Playback Settings Tips Appendix o Example connections when using front Dolby Atmos Enabled speakers This 7.1-channel surround system is the same as a basic 5.1-channel system but with front Dolby Atmos Enabled speakers. FDL FL SW C FR SR . . SL FDR SW FR FL C SR 0 Set “Assign Mode” to “Front Dolby” in the menu. (v p.
Contents Connections Playback Settings Tips Appendix o Example connections when using surround Dolby Atmos Enabled speakers This 7.1-channel surround system is the same as a basic 5.1-channel system but with surround Dolby Atmos Enabled speakers. FL SDL FR SW SDR C SR . . SL SW FR FL C SR 0 Set “Assign Mode” to “Surround Dolby” in the menu. (v p.
Contents Connections Playback Settings Tips Appendix Connecting 5.1-channel speakers: Bi-amp connection of front speaker This system plays back 5.1-channels. You can use the bi-amp connection for front speakers. Bi-amp connection is a method to connect separate amplifiers to the tweeter terminal and woofer terminal of a speaker that supports bi-amplification.
Contents Connections Playback Settings Tips Appendix Connecting 5.1-channel speakers: Second pair of front speaker This system enables switching playback between front speakers A and B as desired. FL (B) FR (A) FL (A) SW FR (B) C SL . . SR SW FR (A) FL (A) C SR 0 Set “Assign Mode” to “Front B” in the menu. (v p.
Contents Connections Playback Settings Tips Appendix Connecting multi-zone speakers o 5.1-channel (MAIN ZONE) + 2-channel (ZONE2) speaker connection This connection method constructs a 5.1-channel speaker system in the MAIN ZONE and a 2-channel system in ZONE2. MAIN ZONE FL FR SW C SL SR . SW FL C SR Front panel Display SL 0 Set “Assign Mode” to “ZONE2” in the menu. (v p. 185) ZONE2 R . ZONE2 L FR .
Contents Connections Playback Settings Tips Appendix o Connecting an external power amplifier You can use this unit as a pre-amp by connecting an external power amplifier to the PRE OUT connectors. By adding a power amplifier to each channel, the realness of the sound can be further enhanced. Select the terminal to use and connect the device. Subwoofer (Primary) AUDIO AUDIO FRONT L CENTER R AUDIO SURROUND BACK L R SURROUND L R L R L R L R L R L R L R SUBWOOFER 2 .
Contents Connections Playback Settings Tips Appendix Connecting a TV Connect a TV to this unit so that the input video is output to the TV. You can also enjoy audio from the TV on this unit. How to connect a TV depends on the connectors and functions equipped on the TV. ARC (Audio Return Channel) function plays TV audio on this unit by sending the TV audio signal to this unit via HDMI cable.
Contents Connections Playback Settings Tips Appendix Connection 1 : TV equipped with an HDMI connector and compatible with the ARC (Audio Return Channel) Use an HDMI cable to connect a TV that is compatible with the ARC function to this unit. Set “HDMI Control” to “On” when using a TV that supports the ARC function. (v p. 160) TV . HDMI IN (ARC) 0 When using the ARC function, connect to the HDMI MONITOR 1 connector.
Contents Connections Playback Settings Tips Appendix Connection 2 : TV equipped with an HDMI connector and incompatible with the ARC (Audio Return Channel) Use an HDMI cable to connect the TV to this unit. To listen to audio from TV on this unit, use an optical cable to connect the TV to this unit. TV IN OPTICAL OUT HDMI IN .
Contents Connections Playback Settings Tips Connection 3 : TV equipped without an HDMI connector Use a component video cable to connect the TV to this unit. To listen to audio from TV on this unit, use an optical cable to connect the TV to this unit. TV IN OPTICAL OUT COMPONENT VIDEO IN Y PB PR .
Contents Connections Playback Settings Tips Appendix Connecting a playback device This unit is equipped with three types of video input connectors (HDMI, component video and composite video) and three types of audio input connectors (HDMI, digital audio and audio). Select input connectors on this unit according to the connectors equipped on the device you want to connect. If the device connected to this unit is equipped with an HDMI connector, it is recommended to use HDMI connections.
Contents Connections Playback Settings Tips Connecting a set-top box (Satellite tuner/cable TV) This explanation uses the connection with a satellite tuner/cable TV STB as an example. Select the input connectors on this unit to match the connectors on the device that you want to connect to. (HDMI incompatible device) Satellite tuner/ Cable TV AUDIO R VIDEO OUT COMPONENT VIDEO OUT Y PB PR HDMI OUT L or or L .
Contents Connections Playback Settings Tips Connecting a DVD player or Blu-ray Disc player This explanation uses the connection with a DVD player or Blu-ray Disc player as an example. Select the input connectors on this unit to match the connectors on the device that you want to connect to. (HDMI incompatible device) DVD player AUDIO OUT R L R COAXIAL OUT Blu-ray Disc player VIDEO OUT COMPONENT VIDEO OUT Y PB PR HDMI OUT HDMI OUT L or or L .
Contents Connections Playback Settings Tips Connecting a video camcorder or game console This explanation uses the connection with a video camcorders as an example. Connect a playback device to this unit, such as a video camcorder or game console. Video camcorder .
Contents Connections Playback Settings Tips Appendix Connecting a USB memory device to the USB port For operating instructions see “Playing a USB memory device” (v p. 71). . USB memory device 0 Denon does not guarantee that all USB memory devices will operate or receive power. When using a portable USB hard disk drive (HDD) which came with an AC adapter, use that device’s supplied AC adapter. NOTE 0 USB memory devices will not work via a USB hub.
Contents Connections Playback Settings Tips Appendix Connecting an FM/AM antenna Connect the antenna, tune in to a broadcast and then move the antenna to the location where there is least noise. Then use tape, etc. to fix the antenna in this location. (“Listening to FM/AM broadcasts” (v p. 79)) AM loop antenna (supplied) 0 If you are unable to receive a good broadcast signal, we recommend installing an outdoor antenna. For details, inquire at the retail store where you purchased the unit.
Contents Connections Playback Settings Tips o AM loop antenna assembly o Using the AM loop antenna 1 Suspending on a wall Suspend directly on a wall without assembling. 2 Put the stand section through the bottom of the loop antenna from the rear and bend it forward. Insert the projecting part into the square hole in the stand. Stand Square hole . Nail, tack, etc. Loop antenna Standing alone Use the procedure shown above to assemble. When assembling, refer to “AM loop antenna assembly”. .
Contents Connections Playback Settings Tips Appendix Connecting to a home network (LAN) This unit can connect to a network using a wired LAN or wireless LAN. You can connect this unit to your home network (LAN) to enable various types of playback and operations as described below.
Contents Connections Playback Settings Wireless LAN Appendix 0 When using this unit, we recommend you use a router equipped with the following functions: When connecting to a wireless LAN network, stand the rod antenna for Bluetooth/wireless LAN connection upright on the rear panel. See “Wi-Fi Setup” on how to connect to a wireless LAN router. (v p. 196) Internet Tips 0 Built-in DHCP server This function automatically assigns IP addresses on the LAN.
Contents Connections Playback Settings Tips Appendix Connecting an external control device REMOTE CONTROL jacks When this unit is installed in a location where the remote control signals cannot reach (installation in a cabinet etc.), it can still be controlled by the remote control by connecting a remote control receiver unit (sold separately). You can also use it to remotely control ZONE2 (separate room). Infrared retransmitter AUX OUT Infrared sensor Input Output .
Contents Connections Playback Settings Tips Appendix TRIGGER OUT jack When a device with TRIGGER IN jack is connected, the connected device’s power on/standby can be controlled through linked operation to this unit. The TRIGGER OUT jack outputs a maximum 12 V DC/150 mA electrical signal. . 12 V DC/150 mA trigger-compatible device NOTE 0 Use a monaural mini-plug cable for connecting the TRIGGER OUT jacks. Do not use a stereo mini-plug cable.
Contents Connections Playback Settings Tips Connecting the power cord After completing all the connections, insert the power plug into the power outlet. Power cord (supplied) To household power outlet .
Contents Connections Playback Settings o Contents Tips Appendix Playback network audio/service Basic operation Turning the power on 69 Selecting the input source 69 Adjusting the volume 70 Turning off the sound temporarily (Muting) 70 Selecting a sound mode Playing a USB memory device 71 Listening to music on a Bluetooth device 75 Listening to FM/AM broadcasts 79 Playing back files stored on a PC or NAS 89 93 AirPlay function 102 Spotify Connect function 105 Convenience function
Contents Connections Playback Settings Tips Appendix Basic operation Turning the power on 1 POWER X Input source select buttons Press POWER X to turn on power to the unit. 0 You can press the input source select button when the unit is in standby mode to turn on the power. 0 You can also switch the power to standby by pressing X on the main unit. Selecting the input source VOLUME df 1 MUTE : Press the input source select button to be played back.
Contents Connections Playback Settings Adjusting the volume 1 Use VOLUME df to adjust the volume. The following describes the procedure for playing DVD player/Blu-ray Disc player. 1 2 3 Turning off the sound temporarily (Muting) Press MUTE :. 4 0 MUTE indicator on the display flashes. 0 : appears on the TV screen. Prepare for playback. A Turn on the power of the TV, subwoofer and player. B Change the TV input to the input of this unit. Press POWER X to turn on power to the unit.
Contents Connections Playback Settings Tips Appendix Playing a USB memory device 0 Playing back music files stored on a USB memory device. 0 Only USB memory devices conforming to mass storage class standards can be played on this unit. 0 This unit is compatible with USB memory devices in “FAT16” or “FAT32” format. 0 The audio format types and specifications supported by this unit for playback are as follows. See “Playing back a USB memory devices” (v p. 246) for details.
Contents Connections Playback Settings 4 Playing files stored on USB memory devices 2 3 Insert a FAT32 formatted USB memory device into the USB port. Appendix Browse the music on your USB memory device and select something to play. 0 When you select something to play you will be asked how you want to queue up your music. Press USB to switch the input source to “USB”. Select the name of this unit.
Contents Playback Settings Tips Operation buttons Use ui to select the “Play Now” or “Play Now & Replace Queue”, then press ENTER. Playback starts. Appendix Function 1/3 Playback / Pause 89 Skip to previous track / Skip to next track CH/PAGE d f Switch to the previous page/next page in the list display NOW PLAYING Nature 0 When an MP3 music file includes album art data, the album art can be displayed while playing the file.
Contents Connections Playback Settings Tips o Operations accessible through the option menu 0 “Adjusting the volume of each channel to match the input source (Channel Level Adjust)” (v p. 109) 0 “Adjusting the tone (Tone)” (v p. 110) 0 “Displaying your desired video during audio playback (Video Select)” (v p. 111) 0 “Playing the same music in all zones (All Zone Stereo)” (v p.
Contents Connections Playback Settings Tips Appendix Listening to music on a Bluetooth device Music files stored on Bluetooth devices such as smartphones, digital music players, etc. can be enjoyed on this unit by pairing and connecting this unit with the Bluetooth device. Communication is possible up to a range of about 98.4 ft/30 m. POWER X NOTE 0 To play back music from a Bluetooth device, the Bluetooth device needs to support the A2DP profile. Bluetooth OPTION uio p ENTER BACK 1/3 .
Contents Connections Playback Settings 4 Playing music from Bluetooth device In order to enjoy music from a Bluetooth device on this unit, the Bluetooth device must first be paired with this unit. Once the Bluetooth device has been paired, it does not need to be paired again. 1 2 3 Tips Appendix Select this unit when its name appears in the list of devices displayed on the screen of the Bluetooth device. Connect to the Bluetooth device while “Pairing” is being displayed on the display of the unit.
Contents Connections Playback Settings Pairing with other Bluetooth devices NOTE Activate the Bluetooth settings on your mobile device. Press and hold Bluetooth on the remote control unit for at least 3 seconds. o Operations accessible through the option menu This unit will go into the pairing mode. 3 Select this unit when its name appears in the list of devices displayed on the screen of the Bluetooth device. 0 “Pairing with other Bluetooth devices” (v p.
Contents Connections Playback Settings Tips Reconnecting to this unit from a Bluetooth device After pairing is completed, the Bluetooth device can be connected without performing any operations on this unit. This operation also needs to be performed when switching the Bluetooth device for playback. 1 2 3 4 If a Bluetooth device is currently connected, deactivate the Bluetooth setting of that device to disconnect it. Activate the Bluetooth setting of the Bluetooth device to be connected.
Contents Connections Playback Settings Tips Appendix Listening to FM/AM broadcasts You can use the built-in tuner of this unit to listen to FM broadcasts and AM broadcasts. Make sure the FM antenna and AM loop antenna are connected to this unit first. TUNER CH/PAGE df OPTION uio p ENTER BACK .
Contents Connections Playback Settings 5 Listening to FM/AM broadcasts 1 2 Connect the antenna. (“Connecting an FM/AM antenna” (v p. 61)) 6 Press TUNER to switch the input source to “Tuner”. G TV screen H STEREO Option GDisplay of this unitH 92.10MHz . 01 FM 3 4 When listening to an FM broadcast. AM: When listening to an AM broadcast. Press TUNE + or TUNE - to select the station you want listen to. Operation buttons .
Contents Connections Playback Settings o Operations accessible through the option menu 0 “Tuning in by entering the frequency (Direct Tune)” (v p. 81) You can enter the receiving frequency directly to tune in. 0 “Tuning in to stations and presetting them automatically (Auto Preset 1 Memory)” (v p. 82) 0 “Presetting the current broadcast station (Preset Memory)” (v p. 83) 2 0 “Specify a name for the preset broadcast station (Preset 0 0 0 0 Name)” (v p.
Contents Connections Playback Settings Changing the tune mode (Tune Mode) 2 3 A maximum of 56 radio stations can be automatically preset. Press OPTION when the input source is “Tuner”. 1 The option menu screen is displayed. Use ui to select “Tune Mode”, then press ENTER. 2 Use o p to select the tune mode, then press ENTER. Auto: Automatically search for and tune to a receivable radio station. Manual: Manually change the frequency one step at a time each time the button is pressed.
Contents Connections Playback Settings Presetting the current broadcast station (Preset Memory) 2 3 4 Appendix Channel Default settings 1–8 92.10 / 92.30 / 92.50 / 92.70 / 93.10 / 93.50 / 93.70 / 94.10 MHz 9 – 16 94.30 / 94.50 / 94.70 / 94.90 / 95.10 / 95.30 / 95.50 / 95.70 MHz 17 – 24 Tune in the broadcast station you want to preset. (“Listening to FM/AM broadcasts” (v p. 80)) 98.10 / 98.30 / 98.50 / 98.70 / 98.90 / 99.10 / 100.10 / 100.30 MHz 25 – 32 100.50 / 100.70 / 100.90 / 101.
Contents Connections Playback Settings 5 Specify a name for the preset broadcast station (Preset Name) You can set the name to the preset broadcast station or change it. Up to 8 characters can be input. 1 2 3 4 6 7 Press OPTION when the input source is “Tuner”. The option menu screen is displayed. Use ui to select “Preset Name”, then press ENTER. Tips Use ui to select a name label, then press ENTER. The screen that lets you edit the Preset Name is displayed.
Contents Connections Playback Settings Skipping preset broadcast stations (Preset Skip) 2 3 A Use o p to select the group of broadcast stations you want to skip. B Use ui to select the broadcast station you want to skip. C Use o p to select “Skip”. The station you selected is not displayed. Press OPTION when the input source is “Tuner”. 4 The option menu screen is displayed. Press OPTION to return to the previous screen. Use ui to select “Preset Skip”, then press ENTER.
Contents Connections Playback Settings Tips Cancelling Preset Skip 1 2 3 While the “Preset Skip” screen is displayed, use o p to select a group containing a broadcast station to cancel the skip for. Use ui to select a broadcast station to cancel the skip for. Use o p to select “On”. The skip is cancelled. NOTE 0 “Preset Skip” cannot be cancelled for groups.
Contents Connections Playback Settings Tips Appendix Listening to Internet Radio 0 Internet Radio refers to radio broadcasts distributed over the Internet. Internet Radio stations from around the world can be received. 0 The Internet Radio station list on this unit the database service provided by TuneIn Radio service. 0 The audio format types and specifications supported by this unit for playback are as follows. See “Playing back Internet Radio” (v p. 249) for details.
Contents Connections Playback Settings Listening to Internet Radio 1 0 You can also press R (HEOS Music). Use ui to select “TuneIn NOTE 0 The radio station database service may be suspended or be otherwise unavailable without notice. Browse among the 100,000 stations neatly organized into popular categories and select a station that appeals to your mood.
Contents Connections Playback Settings Tips Appendix Playing back files stored on a PC or NAS 0 This unit can play back music files and playlists (m3u, wpl) from DLNA compatible servers including PCs and NAS devices on your network. 0 Supported file formats: For details, see “Playing back a file saved on a PC or NAS” (v p. 248). 0 WMA 0 MP3 0 WAV 0 MPEG-4 AAC (HEOS Music) 0 FLAC 0 Apple Lossless CH/PAGE df 0 DSD OPTION uio p ENTER BACK .
Connections Contents Playback Settings 4 Playing back files stored on a PC or NAS Use this procedure to play music files or playlists stored on DLNA files servers on your local network. 1 2 Tips Appendix Browse the music on your PC/NAS and select something to play. 0 When you select something to play you will be asked how you want to queue up your music. Press R (HEOS Music). Use ui to select “Music Servers”, then press ENTER.
Contents 5 Connections Playback Settings Use ui to select the “Play Now” or “Play Now & Replace Queue”, then press ENTER. Tips Appendix 0 The display switches between track title, artist name, and album title each time the main unit’s STATUS is pressed. 0 When a WMA (Windows Media Audio), MP3 or MPEG-4 AAC file includes album art data, the album art can be displayed while the music files are playing. 0 If you use Ver.11 or later of Windows Media Player, the album art for WMA files can be displayed.
Contents Connections Playback Settings Tips o Operations accessible through the option menu 0 “Adjusting the volume of each channel to match the input source (Channel Level Adjust)” (v p. 109) 0 “Adjusting the tone (Tone)” (v p. 110) 0 “Displaying your desired video during audio playback (Video Select)” (v p. 111) 0 “Playing the same music in all zones (All Zone Stereo)” (v p.
Contents Connections Playback Settings Tips Appendix Getting the HEOS App . You can use many online music streaming services from the HEOS App. Depending upon your geographical location, there are several options to choose from. For more information about which services are available in your area please visit http://www.HEOSbyDenon.com Download the HEOS App for iOS or Android by searching App Store, Google Play store or Amazon Appstore for “HEOS”.
Contents Connections Playback Settings Tips o Changing your HEOS Account HEOS Account 1 2 HEOS Accounts can be registered in “HEOS Account” (v p. 202) in the menu of this unit or by tapping “Music” tab - “Settings” icon a in the HEOS App. o What is a HEOS Account? 3 4 A HEOS Account is master account or “keychain” for managing all of your HEOS music services with one single username and password. o Why do I need a HEOS Account? Tap the “Music” tab.
Contents Connections Playback Settings Tips Playing from streaming music services Rooms Drag one room into another to group them A music service is an online music company that provides access to vast music collections via free and/or paid subscriptions. Depending upon your geographical location, there are several options to choose from. For more information about which services are available in your area please visit http://www.HEOSbyDenon.
Contents Connections Playback Settings Tips o Selecting the music track or station from music sources Music Tap the “Music” tab and select a music source. 0 All music services displayed may not be available in your location. This Phone Music Servers USB Music Playlists Rooms History Music .
Contents Playback Settings Tips Browse the music to play. Now Playing Album After selecting a music track or radio station the app will automatically change to the “Now Playing” screen. Album 10 Tracks,60 Mins.,2014 Track 01 Rooms 0 When you select a music track to play you will be asked how you want to queue up your music. Play Now: Inserts the item into the queue after the currently playing track and plays the selected item immediately.
Contents Connections Playback Settings Listening to the same music in multiple rooms Tips Appendix Rooms Rooms Drag one room into another to group them Drag one room into another to group them Dining Dining Song Name 1 Song Name 1 The HEOS system is a true multi-room audio system that automatically synchronizes audio playback between multiple HEOS devices so that the audio coming from different rooms is perfectly in sync and always sounds amazing! You can easily add up to 32 HEOS devices to y
Contents Connections Playback Settings Tips o Ungrouping rooms 1 2 Press and hold your finger on room that you want to remove from the group. Appendix Rooms Rooms Drag one room into another to group them Drag one room into another to group them Dining Dining Song Name 1 Drag it out of the group and lift your finger. Song Name 1 Living Living Song Name 2 NOTE Song Name 2 Living 0 You can not remove the first room that started playing the music before grouping.
Contents Connections Playback Settings o Grouping all rooms (party mode) Rooms You can easily group 16 rooms together into Party Mode by using a "pinch" gesture. Drag one room into another to group them Dining 1 Appendix Rooms Drag one room into another to group them Place two fingers on the screen over the list of rooms. Song Name 1 Living Dining Song Name 2 Quickly pinch your two fingers together and release.
Contents Connections Playback Settings o Ungrouping all rooms You can easily ungroup all of your rooms and exit Party Mode by using a "spread" gesture. 2 3 Rooms Rooms Drag one room into another to group them Dining Song Name 1 Place two fingers close together on the screen over list of rooms. 1 2 Song Name 1 Living Song Name 2 Living 3 Kitchen Song Name 3 Kitchen Bedroom Bedroom All of your rooms will be ungrouped.
Contents Connections Playback Settings Tips Appendix AirPlay function Music files stored on your iPhone, iPod touch, iPad or iTunes can be played on this unit via the network. Router This unit Source input will be switched to “HEOS Music” when AirPlay playback is started. You can stop AirPlay playback by choosing other input source. To see song and artist names together, press STATUS on the main unit. For information about how to use iTunes, also see the Help for iTunes.
Contents Connections Playback Settings Playing songs from your iPhone, iPod touch or iPad 1 2 Connect your iPhone, iPod touch or iPad Wi-Fi to the same network as this unit. 0 For details, see your device’s manual. 2 3 Install iTunes 10, or later, on a Mac or Windows PC that is connected to the same network as this unit. Turn this unit ON. Set “Network Control” to “Always On” for this unit. (v p. 200) NOTE Play the song on your iPhone, iPod touch or iPad.
Contents Connections Playback Settings Appendix Perform iTunes playback operations with the remote control unit of this unit Selecting multiple speakers (devices) It is possible to play iTunes songs on your home’s AirPlay compatible speakers (devices) other than those of this unit. 1 2 Tips With this unit’s remote control unit, you can perform iTunes song play, pause, and auto search (cue) operations. Click the AirPlay icon and select “Multiple”. 1 2 3 Check the speakers you want to use.
Contents Connections Playback Settings Tips Appendix Spotify Connect function Spotify is the world’s most popular streaming service. If you subscribe to Spotify Premium, you can control your new speaker with your phone or tablet. Because Spotify is built-in to your speaker, you can still take calls or use other apps - the music never stops. For information on how to set up and use Spotify Connect please visit www.spotify.
Contents Connections Playback Settings Tips Appendix Convenience functions 0 This section explains how to use convenient functions that can be used for each input source. 0 These functions can only be set in the MAIN ZONE. MAIN (HEOS Music) OPTION .
Contents Connections Playback Settings 1 2 While content is playing, press OPTION. The option menu screen is displayed. Use ui to select “Add to HEOS Favorites”, then press ENTER. Press R (HEOS Music). Use ui to select “HEOS Favorites”, then press ENTER. MUSIC TuneIn Internet Radio HEOS Favorites Music Servers USB Music . 2 Appendix Playing back HEOS Favorites Adding to HEOS Favorites 1 Tips 3 Front panel Display Rear panel 107 Browse the content and select something to play.
Contents Connections Playback Settings Tips Deleting a HEOS Favorites 1 2 While the HEOS Favorites content list is displayed, use ui to select the item you want to remove from HEOS Favorites, then press OPTION. Use ui to select “Remove from HEOS Favorites”, then press ENTER.
Contents Connections Playback Settings 4 Adjusting the volume of each channel to match the input source (Channel Level Adjust) 2 Use o p to adjust the volume. 5 Press OPTION. Use uio p to select “Exit”, then press ENTER. 0 Select “Reset” and press ENTER if you want to restore the adjustment values of the various channels to “0.0 dB” (Default). 0 Headphone volume can be adjusted when a headphone is connected. 0 “Channel Level Adjust” settings are stored for each input source.
Contents Connections Playback Settings 4 Adjusting the tone (Tone) Adjusts the tonal quality of the sound. 1 2 3 Press OPTION. An option menu screen is displayed. 0 When the input source is “HEOS Music”, an option menu for online music is displayed. Select “AVR Options…”, then press ENTER. 5 Tips Appendix Select “On” in step 3 and press i to select the sound range to be adjusted. Bass: Adjust bass. Treble: Adjust treble. Use o p to adjust the tone, then press ENTER.
Contents Connections Playback Settings 4 Displaying your desired video during audio playback (Video Select) 5 This unit can display video from a different source on TV during audio playback. You can set this for each input source. Tips If you selected “On” in step 3, press i and select “Source”. Use o p to select the input source for video you want to play back, then press ENTER. n Supported input sources: CDz / Tuner / HEOS Music 0 “Video Select” settings are stored for each input source.
Contents Connections Playback Settings 3 Adjusting the picture quality for your viewing environment (Picture Mode) Use o p to select the picture mode. No picture quality adjustment is done with this unit. Standard: The standard mode suited for most living room viewing environments. Movie: A mode suited for watching movies in a dark room such as a theater room. Vivid: A mode that makes graphic images for games, etc. brighter and more vivid. An option menu screen is displayed.
Contents Connections Playback Settings 1 You can play back the music being played back in MAIN ZONE simultaneously in ZONE2 (separate room). It is useful when you want to enjoy the same music at the same time in multiple rooms during home party or when you want to play back the same BGM in the entire house. 2 3 2 3 An option menu screen is displayed. 0 When the input source is “HEOS Music”, an option menu for online music is displayed. Select “AVR Options…”, then press ENTER.
Contents Connections Playback Settings Tips Appendix Selecting a sound mode This unit allows you to enjoy various kinds of surround and stereo playback modes. Disc formats such as Blu-ray Disc and DVD, as well as being supported by digital broadcasting, and even by streaming movies and music from internet-based subscription services. This unit supports playback of almost all of these multi-channel audio formats.
Contents Connections Playback Settings Appendix o Switching the sound mode Selecting a sound mode 1 Tips 0 Press MOVIE, MUSIC or GAME to display a list of the sound modes that can be selected. Each time you press MOVIE, MUSIC or GAME, the sound mode changes. 0 While the list is displayed, you can also use ui to select a sound mode. 0 Try out various sound modes and enjoy sound mode in your favorite mode. Press MOVIE, MUSIC or GAME to select a sound mode.
Contents Connections Playback Settings Direct playback Appendix Pure Direct playback Sound recorded in source is played as is. 1 Tips This mode is for playback with higher sound quality than in Direct playback mode. This mode turns off the main unit display and analog video circuit. Doing so suppresses noise sources that affect sound quality. Press PURE to select “Direct”. Direct playback begins. 1 0 While DSD signals are played back, “DSD Direct” is displayed.
Contents Connections Playback Settings Tips Auto surround playback This mode detects the type of input digital signal, and automatically selects the corresponding mode for playback. Perform stereo playback when the input signal is PCM. When the input signal is Dolby Digital or DTS, the music is played back according to the respective channel number. 1 Press PURE to select “Auto”. Auto surround playback begins.
Contents Connections Playback Settings Tips Appendix Description of sound mode types Dolby sound mode Sound mode type Description Dolby Surround This mode uses Dolby Surround Upmixer to extend various sources to natural and realistic multi channels for playback. Use ceiling speakers such as top middle speakers to realize a three-dimensional sound field. Dolby Digital This mode can be selected when playing sources recorded in Dolby Digital.
Contents Connections Playback Settings Tips Appendix DTS sound mode Sound mode type Description DTS Surround This mode can be selected when playing sources recorded in DTS. DTS ES Dscrt6.1z This mode is suitable for playing discs recorded in DTS-ES. The surround back channel added using the discrete method is played as an independent channel. Since all channels are independent, the 360-degree spacial expressiveness and sound localization are enhanced. DTS ES Mtrx6.
Contents Connections Playback Settings Tips Appendix PCM multi-channel sound mode Sound mode type Multi Ch In Description This mode can be selected when playing multi-channel PCM/DSD sources. Original sound mode Sound mode type Description Multi Ch Stereo This mode is for enjoying stereo sound from all speakers. Rock Arena This mode simulates the expansive sound of a live concert in an arena. Jazz Club This mode simulates the experience of being in an intimate jazz club.
Contents Connections Playback Settings Tips Appendix Stereo sound mode Sound mode type Stereo Description This mode plays 2-channel stereo audio with no additional surround sound processing. 0 Sound is output from the front left and right speakers, and subwoofer if connected. 0 When multi-channel signals are inputted, they are mixed down to 2-channel audio and are played back with no additional surround sound processing.
Contents Connections Playback Settings Tips Appendix Sound mode that can be selected for each input signal 0 The following sound modes can be selected using the MOVIE, MUSIC and GAME buttons. . 0 Adjust the sound field effect with the menu “Surround Parameter” to enjoy surround sound the way you like it. (v p.
Connections Playback Settings Tips Appendix .
Connections Playback Settings Tips Appendix . Contents Sound mode Input signal DTS-HD / DTS Express DTS:X PCM multi-channel Multi-channel z3 MOVIE button MUSIC button DTS-HD HI RES S S GAME button S DTS-HD MSTR S S S DTS Express S S S DTS-HD + Dolby Surround S S S DTS-HD + Neural:X S S S DTS:X S S S DTS:X MSTR S S S Multi Ch In S S S Multi Ch In 7.
Contents Connections Playback Settings Tips o Views on the display . + S DVD q w A Shows a decoder to be used. 0 In the case of the Dolby Digital Plus decoder, “H” is displayed. B Shows a decoder that creates sound output. 0 “k” indicates that the Dolby Surround decoder is being used.
Contents Connections Playback Settings Tips Appendix HDMI Control function A recent addition to the HDMI standard is CEC (Consumer Electronics Control), which allows control signals from one device to communicate with another device via the HDMI cable connection. Setting procedure 1 2 3 5 Enable the HDMI Control function of this unit. Set “HDMI Control” to “On”. (v p. 160) Turn the power on for all the devices connected by HDMI cable.
Contents Connections Playback Settings Tips Appendix Smart Menu function This function can be used to configure the settings of this unit, select an input source and set Tuner and Internet Radio stations using the TV remote control. 2 3 Enjoy content from the input source currently selected on this unit. o Source Enable the HDMI Control function of this unit and the TV. (v p. 160) Switch the input of this unit.
Contents Connections Playback Settings Tips o Setup Menu Displays a setup menu for configuring the settings of this unit. o Quick Select Calls up the QUICK SELECT items registered to this unit. NOTE 0 If the “HDMI Control” or “Smart Menu” settings have been changed, always reset the power to connected devices after the change. 0 The Smart Menu function may not work properly depending on the specifications of your TV. In this case, set “Smart Menu” to “Off”. (v p.
Contents Connections Playback Settings Tips Appendix Sleep timer function You can have the power automatically switched to standby once a set time has elapsed. This is convenient for viewing and listening while going to sleep. The sleep timer function can be set for each zone. MAIN SLEEP .
Contents Connections Playback Settings Press SLEEP when the sleep timer is in operation. The remaining time appears on the display. Press MAIN or ZONE2 to select the operating zone with the remote control. o To cancel the sleep timer The button for the selected zone is lit. 2 Appendix o Checking the remaining time Using the sleep timer 1 Tips Press SLEEP to select “Off”. The SLEEP indicator on the display turns off. Press SLEEP and display the time you want to set.
Contents Connections Playback Settings Tips Appendix Quick select plus function Settings such as the input source, volume level and sound mode can be registered to the QUICK SELECT 1 - 4 buttons. You can simply press one of the registered QUICK SELECT buttons in subsequent playbacks to switch to the group of saved settings in a batch. By saving frequently used settings at the QUICK SELECT 1 – 4 buttons, you will always be able to easily call up the same playback environment.
Contents Connections Playback Settings Tips Calling up the settings 1 2 Press MAIN or ZONE2 to select the operating zone with the remote control. The button for the selected zone is lit. Press QUICK SELECT. The Quick Select settings registered to the button you pressed are called up. 0 The default settings for the input source and volume are as shown below.
Contents Connections Playback Settings 2 Changing the settings 1 Tips Press MAIN or ZONE2 to select the operating zone with the remote control. The button for the selected zone is lit. Set the items below to the settings you want to register. 3 The following settings from A to I can be memorized for MAIN ZONE, and settings A and B can be memorized for ZONE2. A Input source (v p. 69) B Volume (v p. 70) C Sound mode (v p.
Contents Connections Playback Settings Tips Appendix Playback in ZONE2 (Separate room) You can operate this unit to enjoy video and audio in a room (ZONE2) that is different from the room where this unit is placed (MAIN ZONE). You can simultaneously play back the same source in both the MAIN ZONE and ZONE2. You can also play back separate sources in the MAIN ZONE and ZONE2. Connecting ZONE2 You can use the following three methods to play back video and audio in ZONE2.
Contents Connections Playback Settings o Connection 2: Connecting using a speaker output terminal Tips Appendix o Connection 3 : Connection using an external amplifier (ZONE2) When “Assign Mode” is set to “ZONE2” in the menu, ZONE2 audio is output from the SURROUND BACK speaker terminal. (v p. 184) The audio signals of this unit’s ZONE2 audio output connectors are output to the ZONE2 amplifiers and played on these amplifiers.
Contents Connections Playback Settings 1 Playback in ZONE2 Tips Appendix Press ZONE2 to set the operating zone to ZONE2 with the remote control. The ZONE2 button lights. 2 POWER X ZONE2 Input source select buttons 3 Press POWER X to turn on the ZONE2 power. The ( indicator on the display lights. 0 Power in ZONE2 can be turned on or off by pressing ZONE2 ON/OFF on the main unit. Press the input source select button to select the input source to be played.
Contents Connections Playback Settings Tips o Adjusting the volume (ZONE2) Use VOLUME df to adjust the volume. ”. 0 At time of purchase, “Volume Limit” is set to “70（–10 dB） (v p. 207) 0 Turn MASTER VOLUME after pressing ZONE2 SOURCE on the main unit to adjust the volume. o Turning off the sound temporarily (Muting) (ZONE2) Press MUTE :. The sound is reduced to the level set at “Mute Level” in the menu. (v p. 208) 0 To cancel mute, either adjust the sound volume or press MUTE : again.
Contents Connections Playback Settings Tips Appendix Menu map When using menu operations, connect this unit to a TV and operate this unit while viewing the TV. The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences. Detailed items Description Page Dialog Level Adjust This setting adjusts the output level to clarify the dialogue output from the center channel.
Contents . Setting items Playback Settings Detailed items Tips Appendix Description Page Input Assign Changes input connector assignment. 169 Source Rename Changes the display name for input source. 171 Hide Sources Removes from the display input sources that are not used. 172 Source Level Adjusts the playback level of the audio input. 172 Input Select Sets the audio input mode.
Contents Setting items Connections Playback Settings Detailed items Tips Appendix Description Page . 【When the user is signed out the HEOS Account】 HEOS Account I have a HEOS Account Selects to sign in. 202 Create Account Creates new HEOS Account. 202 Forgot Password If you forgot your password, we'll send you an email with instructions about how to reset it. 202 【When the user is signed in the HEOS Account】 Front panel Signed in As Displays your HEOS Account.
Contents Connections . Setting items General Playback Settings Detailed items Tips Description Page Language Changes the language of the display on the TV screen. 203 ECO Configures the ECO Mode and Auto Standby energy-saving functions. 203 ZONE2 Setup Makes settings for audio playback with ZONE2. 206 Zone Rename Changes the display title of each zone to one you prefer. 208 Quick Select Names Changes the Quick Select Name display title to one you prefer.
Contents Connections Playback Settings Tips Appendix Menu operations 1 MAIN Press MAIN on the remote control unit to set the operating zone to the MAIN ZONE. The MAIN button lights. 2 3 4 5 uio p ENTER SETUP Use ui p to select the menu to be set or operated, then press ENTER. Use o p to change to desired setting. Press ENTER to enter the setting. 0 To return to the previous item, press BACK. 0 Exiting the menu, press SETUP while the menu is displayed. The menu display disappears. .
Contents Connections Playback Settings Tips Appendix Audio Make audio-related settings. Dialog Level Adjust Subwoofer Level Adjust This setting adjusts the output level to clarify the dialogue output from the center channel. This setting adjusts the volume level for the subwoofer. o Subwoofer Level Adjust o Dialog Level Adjust Set whether to adjust the subwoofer level. Set whether to adjust the dialog level or not. On: Enables the adjustment of the dialog level.
Contents Connections Playback Settings Tips Appendix o Loudness Management Surround Parameter This sets whether to output as specified in “Dynamic Compression” or output directly without compressing the dynamic range of audio recorded in the disc. You can adjust the surround audio sound field effects to match your preferences. The items (parameters) that can be adjusted depend on the signal being input and the currently set sound mode.
Contents Connections Playback Settings Tips Appendix o Dialog Control o Dynamic Compression Adjust the volume of dialog in movies, vocals in music, etc. so these can be heard more easily. Compress dynamic range (difference between loud and soft sounds). Auto: Automatic dynamic range compression on/off control according to source. Low / Medium / High: These set the compression level. Off: Dynamic range compression is always off.
Contents Connections Playback Settings o Center Spread Tips o Delay Time Center Spread expands the center channel signal to left and right front speakers to create a wider frontal audio image for the listener. It is optimized and designed primary for playback of stereo music content. On: Use “Center Spread”. Off (Default): Do not use “Center Spread”. Adjust the audio delay time against video to extend the sound field image.
Contents Connections Playback Settings o Room Size Tips Appendix o Subwoofer Determine size of acoustic environment. Turn subwoofer output on and off. Small: Simulate acoustics of a small room. On (Default): The subwoofer is used. Medium small: Simulate acoustics of a medium-small room. Off: The subwoofer is not used. Medium (Default): Simulate acoustics of a medium room. Medium large: Simulate acoustics of a medium-large room. Large: Simulate acoustics of a large room.
Contents Connections Playback Settings Tips Appendix Restorer 0 This item can be set with analog signals or PCM signal (Sample Rate = 44.1/48 kHz) is input. 0 This item default setting for “HEOS Music” is “Low”. All others are set to “Off”. 0 This cannot be set when the sound mode is set to “Direct” or “Pure Direct”. 0 “Restorer” settings are stored for each input source.
Contents Connections Playback Settings Tips Appendix o Adjust Audio Delay The timing mismatch between the picture and sound needs to be corrected manually. Compensates for incorrect timing between video and audio. 0 ms – 500 ms (Default : 0 ms) 0 Audio Delay for game mode can be set when “Video Mode” is set to “Auto” or “Game”. (v p. 164) 0 “Audio Delay” settings are stored for each input source. 0 You can also finely adjust the delay correction value set by “Auto Lip Sync”.
Contents Connections Playback Settings Tips Appendix o Power On Level Volume Define the volume setting that is active when the power is turned on. Set the MAIN ZONE (room where the unit is located) volume setting. Last (Default): Use the memorized setting from the last session. Set how volume is displayed. Mute: 0 - 98 (Default): Always use the muting on condition when power is turned on. Display in the range 0 (Min) to 98. 1 – 98 (–79 dB – 18 dB) : The volume is adjusted to the set level.
Contents Connections Playback Settings Tips Appendix o MultEQ® XT32 Audyssey® MultEQ® XT32 compensates for both time and frequency characteristics of the listening area based on Audyssey® Setup measurement results. Selection is done from three types of compensation curves. We recommend the “Reference” setting. Set Audyssey MultEQ® XT32, Audyssey Dynamic EQ®, Audyssey Dynamic Volume® and Audyssey LFC™. These can be selected after Audyssey® Setup has been performed.
Contents Connections Playback Settings o Dynamic EQ Tips Appendix o Reference Level Offset Solves the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. Works with MultEQ® XT32. On (Default): Use Dynamic EQ. Off: Do not use Dynamic EQ. Audyssey Dynamic EQ® is referenced to the standard film mix level. It makes adjustments to maintain the reference response and surround envelopment when the volume is turned down from 0 dB.
Contents Connections Playback Settings o Dynamic Volume Tips Appendix o Audyssey LFC™ Solves the problem of large variations in volume level between TV, movies and other content (between quiet passages and loud passages, etc.) by automatically adjusting to the user’s preferred volume setting. Works with MultEQ® XT32. Heavy: Most adjustment to softest and loudest sounds. Medium: Medium adjustment to loudest and softest sound. Light: Least adjustment to loudest and softest sounds.
Contents Connections Playback Settings Tips Appendix o Speaker Selection Graphic EQ Select whether to adjust tones for individual speakers or for all speakers. Uses the graphic equalizer to adjust the tone of each speaker. 0 Speakers for which “Graphic EQ” can be set differ according to the sound mode. 0 This can be set when “MultEQ® XT32” setting is “Off”. (v p. 151) 0 This cannot be set when the sound mode is set to “Direct” or “Pure Direct”.
Contents Connections Playback Settings Tips o Curve Copy Copy the Flat correction curve created in Audyssey® Setup. 0 “Curve Copy” is displayed after Audyssey® Setup has been performed. 0 “Curve Copy” cannot be used when using headphones. o Set Defaults The “Graphic EQ” settings are returned to the default settings.
Contents Connections Playback Settings Tips Appendix Video Make video-related settings. o Picture Mode Picture Adjust Select the desired picture mode according to the video content and your viewing environment. Picture quality can be adjusted. 0 Can be set when the “Video Conversion” setting is “On”. (v p. 164) 0 Can be set when “HDMI”, “COMP” or “VIDEO” is assigned for each input source. (v p.
Contents Connections Playback Settings Tips o Contrast Adjust picture contrast. 0 The two special adjustment modes, “ISF Day” and “ISF Night”, should be used by a certified technician to adjust the color calibration to match the installation conditions. We recommend that the settings and adjustments be carried out by an ISFcertified technician. 0 These settings can also be configured using “Picture Mode” in the option menu. (v p. 156) -50 – +50 (Default : 0) o Brightness Adjust picture brightness.
Contents Connections Playback Settings Tips o HDMI Pass Through HDMI Setup Selects how this unit will transmit HDMI signals to the HDMI output in standby power mode. Make settings for HDMI Audio Out, HDMI Pass Through and HDMI Control settings. NOTE 0 When “HDMI Pass Through” and “HDMI Control” is set to “On”, it consumes more standby power. (“HDMI Pass Through” (v p. 158), “HDMI Control” (v p.
Contents Connections Playback Settings o Pass Through Source Last: The most recently used input source will go into standby mode. CBL/SAT / DVD / Blu-ray / Game / AUX1 / AUX2 / Media Player / CDz (Default : CBL/SAT): Pass through the selected input source. Set whether to allow this unit to be turned on by the input source select button on the remote control when this unit is on standby. Power On + Source (Default): The power of this unit is turned on and the input source changes.
Contents Connections Playback Settings o HDMI Control Tips Appendix o ARC You can link operations with devices connected to HDMI and compatible with HDMI Control. On the TV connected to the HDMI MONITOR 1 connector, set whether to receive sound from the TV via HDMI. On: Use HDMI Control function. On: Use ARC function. Do not use HDMI Control function. Off (Default): Do not use ARC function.
Contents Connections Playback Settings o TV Audio Switching Tips Appendix o Power Off Control Sets automatic switching to the “TV Audio” input when a TV connected via HDMI sends an appropriate CEC control command to this unit. On (Default): Select the “TV Audio” input automatically when receiving a command from the TV. Off: Do not select the “TV Audio” input automatically when receiving a command from the TV. Links the power standby of this unit to external devices.
Contents Connections Playback Settings o Power Saving Tips Appendix o Smart Menu If “TV Speaker” is set as the audio output setting of your TV, this unit is automatically set to standby mode to reduce power consumption. This function is activated in the following cases. 0 When “TV Audio” is selected as the input source of this unit 0 When playing content from a device connected by HDMI On: Use Power Saving function. Off (Default): Do not use Power Saving function.
Contents Connections Playback Settings Appendix o HDMI Video Output Output Settings Select the HDMI monitor connector to be used. Makes settings for video output. 0 Can be set when “HDMI”, “COMP” or “VIDEO” is assigned for each input source. (v p. 170) 0 “Resolution”, “Progressive Mode” and “Aspect Ratio” can be set when “i/p Scaler” is set to anything other than “Off”. (“Resolution” (v p. 165), “Progressive Mode” (v p. 165), “Aspect Ratio” (v p.
Contents Connections Playback Settings o Video Mode Tips Appendix o Video Conversion Configure the video processing method to match the type of video content. The input video signal is converted automatically in conjunction with the connected TV. (v p. 244) Auto (Default): Process video automatically based on the HDMI content information. On (Default): The input video signal is converted. Off: The input video signal is not converted. Game: Always process video for game content.
Contents Connections Playback Settings o Resolution 480p/576p / 1080i / 720p / 1080p / 1080p:24Hz / 4K / 4K (60/50) : Appendix o Progressive Mode Set the output resolution. You can set “Resolution” separately for HDMI output of the analog video input and HDMI input. Auto (Default): Tips Set an appropriate progressive conversion mode for the source video signal.
Contents Connections Playback Settings Tips Appendix o Now Playing On Screen Display Select the on-screen display user interface preferences. Sets the display time for the playback display when the input source is “HEOS Music” or “Tuner”. o Volume Always On (Default): Show display continuously. Auto Off: Show display for 30 seconds after operation. Sets where to display the volume level. Bottom (Default): Top: Off: Display at the bottom. Display at the top. Turn display off.
Contents Connections Playback Settings Tips Appendix GRelation between the “4K Signal Format” setting and supported resolutionsH 4K Signal Format Set the 4K signal format to be played back by this unit when the TV or playback device connected to this unit is HDMI 4K (60Hz/50Hz) signal compatible. Support Resolution o 4K Signal Format 4K 24p, 4K 30p, 4K 25p Set the format of the 4K signal played back by this unit.
Contents Connections Playback Settings Tips Appendix TV Format 0 When setting this to “Enhanced”, we recommend using a “Premium High Speed HDMI Cable” or “Premium High Speed HDMI Cable with Ethernet” that has an “HDMI Premium Certified Cable” label attached to the product package. 0 When this setting is “Enhanced”, configure the television or playback device settings to match this setting.
Contents Connections Playback Settings Tips Appendix Inputs Perform settings related to input source playback. You do not have to change the settings to use the unit. Make settings when needed. Input Assign 0 By default, each item is set as follows. By making connections as indicated by the input sources printed on the audio/video input connectors of this unit, you can just press one of the input source select buttons to easily play back audio or video from a connected device.
Contents Connections Playback Settings o HDMI Tips Appendix o ANALOG Set this to change the HDMI input connectors assigned to the input sources. Set this to change the analog audio input connectors assigned to the input sources. 1/2/3/4/5/6/7/ Front: Assign an HDMI input connector to the selected input source. 1 / 2 / 3 / 4 / 5: –: Do not assign an HDMI input connector to the selected input source.
Contents Connections Playback Settings o VIDEO –: Change the display name for input source. This is convenient when the name of your device and the input source name of this unit are different. You can change the name to suit your needs. When the renaming is completed, the name is displayed on this unit’s display and on the menu screen. Assign the video input connector to the selected input source. Do not assign a video input connector to the selected input source.
Contents Connections Playback Settings Tips Appendix Input Select Hide Sources Set the audio input mode of each input source. The input modes available for selection may vary depending on the input source. Remove from the display input sources that are not used. Show (Default): Use this source. Hide: Do not use this source. 0 “Input Select” settings are stored for each input source. Source Level o Input Mode This function corrects the playback level of the selected input source’s audio input.
Contents Connections Playback Settings Tips Appendix Speakers The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called “Audyssey® Setup”. You do not have to perform Audyssey® Setup when you have already performed “Speaker Calibration” in “Setup Assistant”. To set up the speakers manually, use “Manual Setup” on the menu. (v p.
Contents Connections Playback Settings o About the main listening position 0 Make the room as quiet as possible. Background noise can disrupt the room measurements. Close windows and turn off the power on electronic devices (radios, air conditioners, fluorescent lights, etc.). The measurements could be affected by the sounds emitted by such devices. 0 During the measurement process, place cell phones outside the listening room. Cell phone signals could disrupt the measurements.
Contents Connections Playback Settings 1 Procedure for speaker settings (Audyssey® Setup) Tips Appendix Attach the Sound calibration microphone to the supplied microphone stand or own tripod and install it at the main listening position. When installing the Sound calibration microphone, point the tip of the microphone toward the ceiling and adjust the height to match the height of the ears of a listener in a seated position.
Contents Playback Settings 4 Connect the Sound calibration microphone to the SETUP MIC jack of this unit. When the Sound calibration microphone is connected, the following screen is displayed. . Audyssey Setup Your AV receiver can automatically measure the acoustics of your room then optimize your speakers using the included microphone and microphone stand. Set the following items if necessary. 5 Amp Assign Channel Select Dolby Speaker Setup Tips Select “Start”, then press ENTER.
Contents Playback Settings 7 When the following screen is displayed, select “Begin Test” and then press ENTER. Start the measurement of the first position. Tips Appendix When the detected speaker is displayed, select “Next” and then press ENTER. Audyssey Setup Speaker Detection Audyssey Setup Select “Begin Test” to start the calibration. NOTE: You will hear a series of loud chirps starting and stopping during the tests. Front Center Subwoofer Surround Surr.
Contents Playback Settings 9 Move the Sound calibration microphone to position 2, select “Continue”, then press ENTER. The measurement of the second position starts. Measurements can be made in up to eight positions. Tips Appendix Repeat step 8, measuring positions 3 to 8. 0 To skip measuring the fourth and subsequent listening position, press o to select “Complete” and press ENTER to proceed to step 11.
Contents 11 Connections Playback Settings 12 Perform the settings for Audyssey Dynamic EQ® and Audyssey Dynamic Volume®. The following screen is displayed during the analysis. Configure the settings as preferred. Tips Appendix When the analysis and storage ends, unplug the Sound calibration microphone from the SETUP MIC jack on the main unit and then press “Next”. Audyssey Setup Now Analyzing and correcting your room data. Please disconnect the microphone from your AV receiver.
Contents 13 Connections Playback Settings Tips Select “Details” and press ENTER to verify the measurement results. 0 Subwoofers may measure a greater reported distance than the actual distance due to added electrical delay common in subwoofers. NOTE 0 Do not change the speaker connection or subwoofer volume after Audyssey® Setup. If these are changed, run Audyssey® Setup again in order to configure the optimum equalizer settings.
Contents Connections Playback Settings Tips Appendix Error messages An error message is displayed if Audyssey® Setup could not be completed due to speaker placement, the measurement environment, etc. If an error message is displayed, check the relevant items and perform the necessary measures. Be sure to turn off the power before checking speaker connections. Examples Error details No speakers found.
Contents Connections Playback Settings o Subwoofer level error message and how to adjust 1 2 The optimal level of each subwoofer channel for Audyssey® Setup measurement is 75 dB. During subwoofer level measurement, an error message is displayed when one level of subwoofers is outside the 72 – 78 dB range. When using a subwoofer with built-in amplifier (active type), adjust the subwoofer volume so that the subwoofer level is within the 72 to 78 dB range.
Contents Connections Playback Settings Tips Retrieving Audyssey® Setup settings If you set “Restore...” to “Restore”, you can return to Audyssey® Setup measurement result (value calculated at the start by MultEQ® XT32) even when you have changed each setting manually. Audyssey Setup Your AV receiver can automatically measure the acoustics of your room then optimize your speakers using the included microphone and microphone stand. Set the following items if necessary.
Contents Connections Playback Settings Manual Setup Appendix Amp Assign Select the power amplifier usage method to match your speaker system. See “Speaker configuration and “Amp Assign” settings” (v p. 40) regarding the speaker configuration and connection. Perform when setting the speakers manually or when changing settings made in Audyssey® Setup.
Contents Connections Playback ZONE2 (Default): Setting to assign the unit’s built-in power amplifier for ZONE2 and output the audio in stereo. Bi-Amp: Setting to use the front speakers via the bi-amp connection. Front B: Setting for playback using a second front speaker. You can switch the playback between front speaker A and B according to your liking. Switch the front speaker using “Front Speaker” in the menu. (v p. 194) Settings Tips Appendix Speaker Config.
Contents Connections Playback Settings Tips Appendix o Surround o Center Set the presence and size of the surround speakers. Set the presence and size of the center speaker. Large: Use a large speaker that can adequately play back very low bass frequencies. Large: Use a large speaker that can adequately play back very low bass frequencies. Small (Default): Use a small speaker that has inadequate playback capacity for very low bass frequencies.
Contents Connections Playback Settings o Surr. Back Tips Appendix o Front Height Set the presence, size and number of surround back speakers. Set the presence and size of the front height speakers. Large: Use a large speaker that can adequately play back very low bass frequencies. Large: Use a large speaker that can adequately play back very low bass frequencies. Small (Default): Use a small speaker that has inadequate playback capacity for very low bass frequencies.
Contents Connections Playback Settings Tips Appendix o Top Middle o Top Front Set the presence and size of the top middle speakers. Set the presence and size of the top front speakers. Large: Use a large speaker that can adequately play back very low bass frequencies. Large: Use a large speaker that can adequately play back very low bass frequencies. Small (Default): Use a small speaker that has inadequate playback capacity for very low bass frequencies.
Contents Connections Playback Settings Tips Appendix o Surround Dolby o Front Dolby Set the presence and size of the surround Dolby speakers. Set the presence and size of the front Dolby speakers. Large: Use a large speaker that can adequately play back very low bass frequencies. Large: Use a large speaker that can adequately play back very low bass frequencies. Small (Default): Use a small speaker that has inadequate playback capacity for very low bass frequencies.
Contents Connections Playback Settings Tips o Set the distance Distances 0.0 ft – 60.0 ft / 0.00 m – 18.00 m Set distance from listening position to speakers. Measure beforehand the distance from the listening position to each speaker. 0 The speakers that can be selected differ depending on the “Amp Assign” and “Speaker Config.” settings. (“Amp Assign” (v p. 184), “Speaker Config.” (v p. 185)) 0 Default settings: Front L / Front R / F. Height L / F.
Contents Connections Playback Settings o Dolby Speaker Setup Tips Appendix Levels Set the distance between the Dolby Atmos Enabled speaker and the ceiling. Set the volume of the test tone to be the same at the listening position when it is output from each speaker. 3.0 ft - 11.0 ft / 0.90 m - 3.30 m (Default: 6.0 ft / 1.80 m) o Test Tone Start A test tone is output from the selected speaker. While listening to the test tone, adjust the volume output from the selected speaker.
Contents Connections Playback Settings Tips Appendix o Set the crossover frequency Crossovers 40 Hz / 60 Hz / 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz / 200 Hz / 250 Hz (Default: 80 Hz) Set in accordance with the lower limit frequency of the base frequencies that can be played back through each speaker. See the speaker manual for information concerning speaker crossover frequency.
Contents Connections Playback Settings Tips o LPF for LFE Bass Set LFE signal playback range. Set this when you want to change the playback frequency (low pass filter point) of the subwoofer. Set subwoofer and LFE signal range playback. o Subwoofer Mode 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz / 200 Hz / 250 Hz (Default: 120 Hz) Select low range signals to be reproduced by subwoofer.
Contents Connections Playback Settings Tips Front Speaker Set the front speaker A/B to use for every sound mode. A (Default): Front speaker A is used. B: Front speaker B is used. A+B : Both front speakers A and B are used. 0 This can be set when “Assign Mode” is set to “Front B”. (v p.
Contents Connections Playback Settings Tips Appendix Network To use this unit by connecting it to a home network (LAN), you must configure network settings. If you set up your home network (LAN) via DHCP, set “DHCP” to “On”. (Use the default setting.) This allows this unit to use your home network (LAN).
Contents Connections Playback Settings Appendix o Use iOS Device Wi-Fi Setup Use your iOS device (iPhone/iPod/iPad) to connect to the network. By connecting your iOS device to this unit using Wi-Fi, the unit can be automatically connected to the same network as your device. Connect to a wireless LAN (Wi-Fi) router. The router can be connected in the following ways. Select the connection method to suit your home environment. 1. Select “Use iOS Device” on the TV screen. 2.
Contents Connections Playback Settings o WPS Router Tips o Manual Use a WPS-compatible router to connect using the push button method. 1. Select “Push Button” on the TV screen. 2. Switch to the WPS mode by pressing the WPS button of the router you wish to connect to. 0 The time for pressing the button varies depending on the router. 3. Select “Connect” on the TV screen within 2 minutes. Enter the name (SSID) and password of the network you wish to connect to. 1. Set the following items.
Contents Connections Playback Settings Tips Settings 0 The wireless LAN (Wi-Fi) settings of this unit can also be configured from a PC or tablet that supports wireless LAN connection. Configure the IP address. 0 If you are using a broadband router (DHCP function), the information required for network connection such as the IP address will be automatically configured since the DHCP function is set to “On” in the default settings of this unit.
Contents Connections Playback Settings o DHCP Tips o Default Gateway Selects how to connect to the network. When connected to a gateway (router), input its IP address. On (Default): Configure the network settings automatically from your router. Off: Configure the network settings manually. o DNS Enter the DNS address indicated in the documentation supplied by your provider. o IP Address Set the IP address within the ranges shown below.
Contents Connections Playback Settings Network Control Tips Appendix Friendly Name Enables network communication in standby power mode. Off In Standby: Suspend network function during standby. Always On (Default): Network is on during standby. Main unit operable with a network compatible controller. The Friendly Name is the name of this unit displayed on the network. You can change the Friendly Name according to your preferences. o Friendly Name Selects Friendly Name from the list.
Contents Connections Playback Settings Checks whether this unit has access to the Internet (WAN). Used to check the network connection. OK o Physical Connection Error: Checks the physical LAN port connection. OK Failed to connect to the Internet. Check the Internet connection environment or router settings. The LAN cable is not connected. Check the connection. 0 When connected using a wireless LAN, “Connection be displayed.
Contents Connections Playback Settings Tips Appendix HEOS Account Make HEOS Account-related settings. HEOS Account is needed in order to use HEOS Favorites. The menu displayed differs depending on the status of the HEOS Account. You have not signed in You have already signed in o I have a HEOS Account o Signed in As If you already have a HEOS Account, enter the current account name and password to sign in. The currently signed in HEOS Account is displayed.
Contents Connections Playback Settings Tips Appendix General Make various other settings. Language ECO Set the language for display the menu on the TV screen. Configure the settings of the ECO Mode and auto standby mode. English / Français / Español (Default: English) o ECO Mode This mode can reduce the power consumption when the power of the unit is on. 0 “Language” can also be set up by the following operation. However, the menu screen is not displayed.
Contents Connections Playback Settings o Power On Default Appendix o On Screen Display Set the mode to ECO when the power is on. Last (Default): The ECO Mode will be set to the previous setting before the power was switched off. On: When power is turned on, the mode will always be switched to the ECO Mode in “On”. Auto: When power is turned on, the mode will always be switched to the ECO Mode in “Auto”. Off: When power is turned on, the mode will always be switched to the ECO Mode in “Off”.
Contents Connections Playback Settings o Auto Standby Tips Appendix n ZONE2 When there are no operations for a certain period of time as set here, the power is automatically shut off even if there is audio or video input. Set so the unit power automatically switches to standby. n MAIN ZONE Sets the time for switching to auto standby when there are no audio or video signals input into this unit. Before the unit enters standby mode, “Auto Standby” is displayed on the unit display and the menu screen.
Contents Connections Playback Settings Tips o Lch Level ZONE2 Setup Adjust the left channel output level. Makes settings for audio playback with ZONE2. -12 dB – +12 dB (Default : 0 dB) o Rch Level 0 Values set for “Volume Limit” and “Power On Volume” are displayed according to the setting specified for the volume “Scale”. (v p. 150) Adjust the right channel output level. o Bass -12 dB – +12 dB (Default : 0 dB) Adjust bass.
Contents Connections Playback Settings o HDMI Audio Tips Appendix o Volume Limit Selects the audio signal format for playing an HDMI source in ZONE2. Make a setting for maximum volume. Through (Default): The HDMI audio signal is passed through this unit to the device in ZONE2. 60 (-20 dB) / 70 (-10 dB) / 80 (0 dB) (Default : 70 (-10 dB)) The HDMI audio signal input into this unit is converted to a PCM signal that can be output from the ZONE2 PRE OUT connectors or speaker terminals.
Contents Connections Playback Settings o Mute Level Tips Appendix Zone Rename Set the amount of attenuation when muting is on. Change the display title of each zone to one you prefer. Full (Default): The sound is muted entirely. MAIN ZONE / ZONE2 -40 dB : The sound is attenuated by 40 dB down. Set Defaults: -20 dB : The sound is attenuated by 20 dB down. The default setting is restored for the edited zone name. 0 Up to 10 characters can be input.
Contents Connections Playback Settings Trigger Out Tips Appendix Front Display Select the conditions for activating trigger out. For details about how to connect the TRIGGER OUT jack, see “TRIGGER OUT jack” (v p. 66). Makes settings related to the display on this unit. o Dimmer Adjust the display brightness of this unit. n When setting for zone (MAIN ZONE / ZONE2) Trigger out is activated through linkage to the power of the zone set to “On”.
Contents Connections Playback Settings Appendix o Auto-Update Firmware Turns on Automatic Updates so that futures updates are automatically downloaded and installed when this unit is in standby mode. Checks for the latest firmware information about updates and upgrades, updates the firmware, and sets up the notification message display for upgrades. n Auto-Update o Check for Update This unit will automatically update to the newest firmware when in standby mode. Check for firmware updates.
Contents Connections Playback Settings o Allow Update Tips Appendix o Upgrade Notification Enable or disable updates and upgrades for this unit. On (Default): Enables this unit to receive updates and upgrades. Off: Prevents this unit from receiving update and upgrade. When the latest Upgrade firmware is available, a notification message is displayed on the TV screen at power on. The notification message is displayed for about 40 seconds when the power is turned on.
Contents Connections Playback Settings o Add New Feature Notes concerning use of “Update” and “Add New Feature” Upgrade Package: Display the items to be upgraded. Upgrade Status: Display a list of the additional functions provided by the upgrade. requirements and settings for an Internet connection. (v p. 63) 0 Do not turn off the power until updating or upgrading is completed. 0 Approximately 1 hour is required for the updating/upgrading procedure to be completed.
Contents Connections Playback Settings Tips Appendix o Video Information Show information about this unit settings, input signals, etc. Show the HDMI input/output signals and HDMI monitor information for MAIN ZONE. o Audio HDMI Signal Info. Resolution / Color Space / Pixel Depth Show the audio information for MAIN ZONE. Sound Mode: The currently set sound mode. Input Signal: The input signal type. Format: The number of input signal channels (presence of front, surround, LFE).
Contents Connections Playback Settings o Notifications To help us improve our products and customer service, Denon collects anonymous information about how you use this unit (such as frequently used input sources and sound modes and speaker settings). Denon will never provide any information we collect to third parties. Notification Alerts Notification messages are displayed. Off: Notification messages are not displayed. Yes: Provide information on the operating status of this unit.
Contents Connections Playback Settings Save & Load Tips Appendix Setup Lock Save and restore device settings by using a USB memory device. Protect settings from inadvertent changes. o Lock 0 Use a USB memory device that has at least 128 MB of free space and is formatted to FAT32. Data may not Save/Load correctly to some USB memory devices. 0 It may take up to 10 minutes for data to Save/Load. Do not turn off the power until the process is complete. On: Turn protection on.
Contents Connections Playback Settings Tips Appendix Limiting the operating zone with the remote control ZONE2 operations can be disabled using the remote control. 1 ZONE2 Press and hold ZONE2 and SETUP. The MAIN and ZONE2 buttons blink. o Canceling the settings 1 Press and hold ZONE2 and SETUP while configuring the setting. The MAIN and ZONE2 buttons blink and the setting is canceled. .
Contents Connections Playback Settings o Contents Appendix Troubleshooting Tips I want the volume not to become too loud by mistake 218 I want to keep the volume at the same level when I turn the power on 218 I want to have the subwoofer always output audio 218 I want to make human voices in the movies clearer 218 I want to keep bass and clarity during playback at a lower volume level 218 I want to automatically adjust the volume level difference in content such as TV and movies 218 I wan
Contents Connections Playback Settings Tips Appendix Tips I want the volume not to become too loud by mistake 0 Set the volume upper limit for “Volume Limit” in the menu beforehand. This prevents children or others from increasing the volume too much by mistake. You can set this for each zone. (“Volume” (v p. 150), “Volume Limit” (v p.
Contents Connections Playback Settings Tips Appendix I want to set the optimized listening environment after changing the configuration/position of the speakers or changing a speaker to a new one 0 Perform Audyssey® Setup. This automatically makes the optimized speaker settings for the new listening environment. (v p. 173) I want to combine a desired video with the current music 0 Set “Video Select” in the option menu to “On”.
Contents Connections Playback Settings Tips Appendix Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? 0 If steps 1 to 3 above do not improve the problem, restarting the device may improve the problem. Continue pressing the X button on the unit until “Restart” appears in the display, or remove and re-insert the power cord of the unit.
Contents Connections Playback Settings Tips Appendix Power does not turn on / Power is turned off Power does not turn on. 0 Check whether the power plug is correctly inserted into the power outlet. (v p. 67) Power automatically turns off. 0 The sleep timer is set. Turn on the power again. (v p. 129) 0 “Auto Standby” is set. “Auto Standby” is triggered when there is no operation for a set amount of time. To disable “Auto Standby”, set “Auto Standby” on the menu to “Off”. (v p.
Contents Connections Playback Settings Tips Appendix Operations cannot be performed through the remote control unit Operations cannot be performed through the remote control unit. 0 Batteries are worn out. Replace with new batteries. (v p. 9) 0 Operate the remote control unit within a distance of about 23 ft/7 m from this unit and at an angle of within 30°. (v p. 9) 0 Remove any obstacle between this unit and the remote control unit.
Contents Connections Playback Settings Tips Appendix No sound comes out No sound comes out of speakers. 0 Check the connections for all devices. (v p. 36) 0 Insert connection cables all the way in. 0 Check that input connectors and output connectors are not reversely connected. 0 Check cables for damage. 0 Check that speaker cables are properly connected. Check that cable core wires come in contact with the metal part on speaker terminals. (v p. 36) 0 Securely tighten the speaker terminals.
Contents Connections Playback Settings Tips Appendix Desired sound does not come out The volume does not increase. 0 The maximum volume is set too low. Set the maximum volume using “Limit” on the menu. (v p. 150) 0 Appropriate volume correction processing is performed according to the input audio format and settings, so the volume may not reach the upper limit. No sound comes out with the HDMI connection. 0 Check the connection of the HDMI connectors. (v p.
Contents Connections Playback Settings Tips Appendix DTS sound is not output. 0 Check that the digital audio output setting on the connected device is set to “DTS”. Dolby Atmos, Dolby TrueHD, DTS-HD, Dolby Digital Plus audio is not output. 0 Make HDMI connections. (v p. 57) 0 Check the digital audio output setting on the connected device. On some devices, “PCM” is set by default. DTS Neural:X mode cannot be selected. 0 DTS Neural:X cannot be selected when using the headphones.
Contents Connections Playback Settings Tips Appendix Sound is interrupted or noise occurs During playback from the Internet radio or USB memory device, sound is occasionally interrupted. 0 When the transfer speed of the USB memory device is slow, sound may occasionally be interrupted. 0 The network communication speed is slow or the radio station is busy. When making a call on iPhone, noise occurs in audio output on this unit. 0 When making a call, keep a distance of 0.
Contents Connections Playback Settings Tips Appendix No video is shown on the TV No picture appears. 0 Check the connections for all devices. (v p. 53) 0 Insert connection cables all the way in. 0 Check that input connectors and output connectors are not reversely connected. 0 Check cables for damage. 0 Match the input settings to the input connector of the TV connected to this unit. (v p. 169) 0 Check that the proper input source is selected. (v p. 69) 0 Check the video input connector setting.
Contents Connections Playback Settings Tips Appendix No video from an input source such as a game console is shown on the TV. 0 When special video signals are input from a game console, etc., the Video Conversion function may not function. Connect the input connector to the monitor output connector of the same type. While the menu is being displayed, no video is shown on the TV.
Contents Connections Playback Settings Tips Appendix The menu screen is not displayed on the TV The menu screen or status information screen is not displayed on the TV. 0 The menu screen is only displayed on this unit and a TV connected with an HDMI cable. If this unit is connected to a TV using a different video output connector, operate while watching the display on this unit. 0 The status information will not appear on the TV when the following video signals are being played. (v p.
Contents Connections Playback Settings Tips Appendix AirPlay cannot be played back The AirPlay icon is not displayed on iTunes / iPhone / iPod touch / iPad. 0 This unit and PC / iPhone / iPod touch / iPad are not connected to the same network (LAN). Connect it to the same LAN as this unit. (v p. 63) 0 The firmware on iTunes / iPhone / iPod touch / iPad is not compatible with AirPlay. Update the firmware to the latest version. Audio is not output.
Contents Connections Playback Settings Tips Appendix USB memory devices cannot be played back USB memory device is not recognized. 0 Disconnect and reconnect the USB memory device. (v p. 60) 0 Mass storage class compatible USB memory devices are supported. 0 This unit does not support a connection through a USB hub. Connect the USB memory device directly to the USB port. 0 The USB memory device must be formatted to FAT16 or FAT32. 0 Not all USB memory devices are guaranteed to work.
Contents Connections Playback Settings Tips Appendix Bluetooth cannot be played back Bluetooth devices cannot be connected to this unit. 0 The Bluetooth function in the Bluetooth device has not been enabled. See the Owner’s Manual of the Bluetooth device to enable the Bluetooth function. 0 Bring the Bluetooth device near to this unit. 0 The Bluetooth device cannot connect with this unit if it is not compatible with the A2DP profile.
Contents Connections Playback Settings Tips Appendix The Internet radio cannot be played back A list of broadcasting stations is not displayed. 0 The LAN cable is not properly connected, or the network is disconnected. Check the connection status. (v p. 63) 0 Perform the network diagnostic mode. Internet Radio cannot be played. 0 The selected radio station is broadcasting in a format that is not supported by this unit. Formats that can be played back in this unit are MP3, WMA and AAC. (v p.
Contents Connections Playback Settings Tips Appendix Music files on PC or NAS cannot be played back Files stored on a computer cannot be played. 0 Files are stored in a non-compatible format. Record in a compatible format. (v p. 248) 0 Files that are copyright protected cannot be played on this unit. 0 The USB port of this unit cannot be used for connection to a computer. 0 Media sharing settings on the server or NAS do not allow this unit. Change the settings to allow this unit.
Contents Connections Playback Settings Tips Appendix Various online services cannot be played Various online services cannot be played. 0 The online service may have been discontinued. The HDMI Control function does not work The HDMI Control function does not work. 0 Check that “HDMI Control” in the menu is set to “On”. (v p. 160) 0 You cannot operate devices that are not compatible with the HDMI Control function.
Contents Connections Playback Settings Tips Appendix Cannot connect to a wireless LAN network Cannot connect to the network. 0 The network name (SSID), password and encryption setting have not been set up correctly. Configure the network settings according to the setting details of this unit. (v p. 197) 0 Shorten the distance from the wireless LAN access point and remove any obstructions to improve access first before re-connecting again.
Contents Connections Playback Settings Tips Appendix When using HDMI ZONE2, the devices does not function properly When using MAIN ZONE, video output is interrupted in HDMI ZONE2. 0 With the same input source selected for MAIN ZONE and ZONE2, when you operate MAIN ZONE, video may be interrupted in HDMI ZONE2. When using HDMI ZONE2, no video or audio is output from the TV in ZONE2. 0 Check that the power is on for ZONE2. (v p. 136) 0 Check the input source for ZONE2. (v p.
Contents Connections Playback Settings Tips Appendix Update/upgrade error messages If an update/upgrade is interrupted or fails, an error message appears. Display Description Connection failed. Please check your network, then try The network connection is unstable. again. Connection to the server failed. Check your network environment and try the update again. Update failed. Please check your network, then try again. The download of the firmware failed.
Contents Connections Playback Settings Tips Appendix Resetting factory settings If the indicators are incorrect or the unit cannot be operated, restarting the unit may improve the problem. We recommend restarting the unit before returning the settings to the default settings. (v p. 220) If the operations are not improved by restarting the unit, follow the steps below. Various settings are reset to the factory default values. Make settings again. X 1 2 TUNER PRESET CH – .
Contents Connections Playback Settings Tips Appendix Resetting network settings If network contents cannot be played or the unit cannot connect to the network, restarting the unit may improve the problem. We recommend restarting the unit before returning the settings to the default settings. (v p. 220) If the operations are not improved by restarting the unit, follow the steps below. Network settings are reset to the factory default values. Make settings again.
Contents Connections Playback Settings Tips Appendix About HDMI HDMI is an abbreviation of High-Definition Multimedia Interface, which is an AV digital interface that can be connected to a TV or amplifier. With the HDMI connection, high definition video and high quality audio formats adopted by Blu-ray Disc players (Dolby Digital Plus, Dolby TrueHD, DTS-HD, DTS-HD Master Audio) can be transmitted, which is not possible with the analog video transmission.
Contents Connections Playback Settings 0 Auto Lip Sync 0 ARC (Audio Return Channel) This function can automatically correct delay between the audio and video. Use a TV that is compatible with the Auto Lip Sync function. Even when the power to this unit is set to standby, signals input from the HDMI input connector are output to a TV or other device that is connected to the HDMI output connector.
Contents Connections Playback Settings o Supported audio formats Copyright protection system 7.1-channel, 32 kHz – 192 kHz, 16/20/24 bit Bitstream Dolby Digital / DTS / Dolby Atmos / Dolby TrueHD / Dolby Digital Plus / DTS:X / DTS-HD Master Audio / DTS-HD High Resolution Audio / DTS Express DSD 2-channel – 5.1-channel, 2.
Contents Connections Playback Settings Tips Appendix Video conversion function This unit automatically converts the input video signals as shown in the diagram before outputting them to the TV.
Contents Connections Playback Settings Tips Appendix . This unit can convert the input video signals to the resolution that is set for “Resolution” in the menu before outputting them to the TV. (v p.
Contents Connections Playback Settings Tips Appendix Playing back a USB memory devices 0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. 0 This unit can show the artwork that was embedded by using MP3 ID3-Tag Ver. 2.3 or 2.4. 0 This unit is compatible with WMA META tags. 0 If the image size (pixels) of an album artwork exceeds 500 × 500 (WMA/MP3/Apple Lossless/DSD) or 349 × 349 (MPEG-4 AAC), then music may not be played back properly.
Contents Connections Playback Settings The limits on the number of folders and files that can be displayed by this unit are as follows. Media Memory capacity USB memory device 8 levels Number of folders 500 filesz2 5000 Number of This unit supports the following Bluetooth profile. 0 A2DP (Advanced Audio Distribution Profile): When a Bluetooth device that supports this standard is connected, monaural and stereo sound data can be streamed at a high quality.
Contents Connections Playback Settings Tips Appendix Playing back a file saved on a PC or NAS 0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. 0 This unit can show the artwork that was embedded by using MP3 ID3-Tag Ver. 2.3 or 2.4. 0 This unit is compatible with WMA META tags. 0 If the image size (pixels) of an album artwork exceeds 500 × 500 (WMA/MP3/WAV/FLAC/Apple Lossless/DSD) or 349 × 349 (MPEG-4 AAC), then music may not be played back properly.
Contents Connections Playback Settings Tips Appendix Playing back Internet Radio Personal memory plus function o Playable broadcast station specifications The most recently used settings (input mode, HDMI output mode, sound mode, tone control, channel level, MultEQ® XT32, Dynamic EQ, Dynamic Volume, Restorer and audio delay, etc.) are saved for each input source. WMA Sampling frequency 32/44.1/48 kHz MP3 32/44.1/48 kHz Bit rate 48 – 192 kbps 32 – 320 kbps MPEG-4 AAC 32/44.
Contents Connections Playback Settings Tips Appendix Sound modes and channel output . S This indicates the audio output channels or surround parameters that can be set. D This indicates the audio output channels. The output channels depend on the settings of “Speaker Config.”. (v p.
Contents z1 z2 z3 z4 z5 Connections Playback Settings Tips The applicable sound mode includes “Dolby Surround” and sound modes that have “+Dolby Surround” in the sound mode name. The applicable sound mode includes “DTS Neural:X” and sound modes that have “+Neural:X” in the sound mode name. A signal for each channel contained in an input signal is output as audio. Audio is not output when “Speaker Config.” - “Surr. Back” in the menu is set to “1 spkr”. (v p.
Contents Connections Playback Settings Tips Appendix .
Connections Playback Settings Tips Appendix .
Contents z1 z2 z3 z4 z5 z6 z7 z8 Connections Playback Settings Tips This item can be selected when a Dolby Digital, Dolby Digital Plus, Dolby TrueHD or Dolby Atmos signal is played. This item can be selected when a Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS:X or DTS signal is played. This item can be selected when a DTS:X signal that is compatible with the Dialog Control function is input. This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.
Contents Connections Playback Settings Tips Appendix Types of input signals, and corresponding sound modes . F This indicates the default sound mode. S This indicates the selectable sound mode. 2-channel signal Sound mode NOTE Analog / PCM Dolby Digital (+/HD) DTS (-HD) Multi-channel signal DSD (Super Audio CD) DTS Surround DTS:X MSTR / DTS:X DTS-HD MSTR DTS-HD HI RES DTS ES Dscrt6.1 DTS ES Mtrx6.
Connections Playback Settings Tips Appendix . Contents 2-channel signal Sound mode Multi Ch In Multi Ch In Multi Ch In + Dolby Surround Multi Ch In 7.
Contents z1 z2 z3 z4 z5 z6 z7 z8 z9 z10 z11 Connections Playback Settings Tips This item can be selected when using any of the Surround Back, Front Height, Top Front, Top Middle, Front Dolby or Surround Dolby speaker. This item can be selected when surround back speakers are used. This item can be selected when the input signal is DTS-HD Master Audio. This item can be selected when the input signal is DTS-HD Hi Resolution. This item can be selected when the input signal is DTS 96/24.
Contents Connections Playback Settings Tips Appendix Explanation of terms o Audyssey Audyssey LFC™ (Low Frequency Containment) Audyssey LFC™ solves the problem of low frequency sounds disturbing people in neighboring rooms or apartments. Audyssey LFC™ dynamically monitors the audio content and removes the low frequencies that pass through walls, floors and ceilings. It then applies psychoacoustic processing to restore the perception of low bass for listeners in the room.
Contents Connections Playback Settings o Dolby Tips Appendix Dolby Digital Dolby Digital is a multi-channel digital signal format developed by Dolby Laboratories. A total of 5.1-channels are played: 3 front channels (“FL”, “FR” and “C”), 2 surround channels (“SL” and “SR”) and the “LFE” channel for low frequency effects. Because of this, there is no crosstalk between channels and a realistic sound field with a “three-dimensional” feeling (sense of distance, movement and positioning) is achieved.
Contents Connections Playback Settings Tips Appendix o DTS Dolby Speaker Technology (Dolby Atmos Enabled speakers) A convenient alternative to speakers built into the ceiling, Dolby Atmos Enabled speakers employ the ceiling above you as a reflective surface for reproducing audio in the height plane above the listener. These speakers feature a unique upward firing driver and special signal processing. These features can be built into a conventional speaker or standalone speaker module.
Contents Connections Playback Settings Tips Appendix DTS-ES™ Discrete 6.1 DTS-HD High Resolution Audio DTS-ES™ Discrete 6.1 is a 6.1-channel discrete digital audio format adding a surround back (SB) channel to the DTS digital surround sound. Decoding of conventional 5.1-channel audio signals is also possible according to the decoder.
Contents Connections Playback Settings o Audio This is a codec for lossless audio compression method developed by Apple Inc. This codec can be played back on iTunes, iPod or iPhone. Data compressed to approximately 60 – 70 % can be decompressed to exactly the same original data. FLAC (Free Lossless Audio Codec) FLAC stands for Free lossless Audio Codec, and is a lossless free audio file format. Lossless means that the audio is compressed without any loss in quality. The FLAC license is as shown below.
Contents Connections Playback Settings Tips Appendix MPEG (Moving Picture Experts Group), MPEG-2, MPEG-4 Speaker impedance These are the names for digital compression format standards used for the encoding of video and audio. Video standards include “MPEG-1 Video”, “MPEG-2 Video”, “MPEG-4 Visual”, “MPEG-4 AVC”. Audio standards include “MPEG-1 Audio”, “MPEG-2 Audio”, “MPEG-4 AAC”. This is an AC resistance value, indicated in Ω (ohms). Greater power can be obtained when this value is smaller.
Contents Connections Playback Settings Tips Appendix o Video o Network ISF AirPlay ISF (Imaging Science Foundation) is an organization that certifies video technicians who are then qualified to carry out calibration and adjustment to match the installation conditions. It also sets quality standards for the optimization of device video performance. AirPlay sends (plays) contents recorded in iTunes or on an iPhone/iPod touch/iPad to a compatible device via the network.
Contents Connections Playback Settings Tips Appendix o Others WPA-PSK/WPA2-PSK (Pre-shared Key) This is a simple authentication system for mutual authentication when a preset character string matches on the wireless LAN access point and client. HDCP When transmitting digital signals between devices, this copyright protection technology encrypts the signals to prevent content from being copied without authorization.
Contents Connections Playback Settings Tips Appendix . Trademark information . Manufactured under license from Audyssey Laboratories™. U.S. and foreign patents pending. Audyssey MultEQ® XT32, Audyssey Dynamic EQ®, Audyssey Dynamic Volume® and Audyssey LFC™ are registered trademarks of Audyssey Laboratories. .
Connections Playback Settings Tips Appendix . Contents . For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS and the Symbol together, DTS Virtual:X, DTS:X, and the DTS:X logo are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved. . The Wi-Fi CERTIFIED logo is a registered trademark of the Wi-Fi Alliance.
Contents Connections Playback Settings Tips Specifications o Audio section 0 Power amplifier Rated output: Front: 105 W + 105 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.) 135 W + 135 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Center: 105 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.) 135 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Surround: 105 W + 105 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.) 135 W + 135 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.
Contents Connections Playback Settings Tips 0 Analog Input sensitivity: 200 mV Frequency response: 10 Hz – 100 kHz — +1, –3 dB (Direct mode) S/N: 100 dB (IHF–A weighted, Direct mode) Distortion: 0.008 % (20 Hz – 20 kHz) (Direct mode) Rated output: 1.2 V 0 Digital D/A output: Rated output — 2 V (at 0 dB playback) Total harmonic distortion — 0.
Contents Connections Playback Settings Tips o Video section 0 Color component video connector Input/output level and impedance: Y signal — 1 Vp-p, 75 Ω/ohms PB / CB signal — 0.7 Vp-p, 75 Ω/ohms PR / CR signal — 0.7 Vp-p, 75 Ω/ohms Frequency response: 5 Hz – 60 MHz — 0, –3 dB o Tuner section [FM] [AM] (Note: μV at 75 Ω/ohms, 0 dBf = 1 x 10 –15 W) Reception frequency range: 87.5 MHz – 107.9 MHz 520 kHz – 1710 kHz Effective sensitivity: 1.2 μV (12.8 dBf) 18 μV 50 dB sensitivity: MONO ― 2.
Contents Connections Playback Settings Tips o Wireless LAN section Network type (wireless LAN standard): Conforming to IEEE 802.11a/b/g/n (Wi-Fi® compliant) z1 Security: WEP 64 bit, WEP 128 bit WPA/WPA2-PSK (AES) WPA/WPA2-PSK (TKIP) Used frequency range: 2.4 GHz, 5 GHz z1 The Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product Logo are registered trademarks of the Wi-Fi Alliance.
Contents Connections Playback Settings Tips Appendix o Bluetooth section Communications system: Bluetooth Specification Version 3.0 + EDR (Enhanced Data Rate) Transmission power: Bluetooth Specification Power Class 1 Maximum communication range: Approx. 98.4 ft/30 m in line of sight z2 Used frequency range: 2.4 GHz Modulation scheme: FHSS (Frequency-Hopping Spread Spectrum) Supported profiles: A2DP (Advanced Audio Distribution Profile) 1.2 AVRCP (Audio Video Remote Control Profile) 1.
Contents Connections Playback Settings Tips Appendix 3/4 (19) 2 1/4 (54) 8 1/2 (215) 15 3/8 (389) 13 3/8 (338) 2 3/4 (69) 1 3/8 (32) o Dimensions (Unit : in. (mm)) 13 5/8 (344) 2 3/8 (60) 9 3/8 (235) 6 5/8 (167) 1 7/8 (45) . 1 7/8 (45) 5/8 (15) 6 (152) 17 1/8 (434) o Weight : 23 lbs 13 oz (10.
Contents Connections Index Playback Settings vB v Numerics 3D ................................................................ 241 4K ................................................................ 241 5.1-channel .............................................. 33, 41 7.1-channel .............................................. 33, 42 AirPlay .......................................................... 102 All Zone Stereo ............................................ 113 Audio formats ....................
Contents Connections vI Playback Settings vN Tips Appendix vR Input Assign ................................................. 169 NAS ............................................................... 89 Rear panel ...................................................... 21 Input settings ........................................ 139, 169 Network settings .......................................... 195 Remote control unit ........................................ 25 Input signal ......................
Contents Connections vT Playback Settings Tips vW Tips .............................................................. 218 Wi-Fi settings ............................................... 196 Troubleshooting ........................................... 220 Wired LAN .............................................. 63, 195 TV ....................................................... 53, 54, 55 Wireless LAN ......................................... 64, 196 vU vZ USB memory device ......................
Contents Connections Playback Settings Tips Appendix License o License information for the software used in the unit n GPL Open Source Used bridge-utils busybox ebtables Linux kernel mtd-utils ntfs-3g_ntfsprogs ntpclient u-boot wireless-tools About GPL (GNU-General Public License), LGPL (GNU Lesser General Public License) License This product uses GPL/LGPL software and software made by other companies.
Contents Connections Playback Settings n LGPL Appendix n e2fsprogs-libs-1.40.8/lib/uuid Open Source Used ffmpeg glibc libmms Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Version 0.8.3 2.9 0.6.2 1. Redistributions of source code must retain the above copyright notice, and the entire permission notice in its entirety, including the disclaimer of warranties. 2.
Contents Connections Playback Settings n expat-2.0.1 Tips Appendix n getopt Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers. http://cvsweb.netbsd.org/bsdweb.cgi/src/lib/libc/stdlib/ Copyright (c) 1987, 1993, 1994 The Regents of the University of California. All rights reserved.
Contents Connections Playback Settings n jQuery Appendix n libpcap-1.4.0 Copyright 2014 jQuery Foundation and other contributors http://jquery.
Contents Connections Playback Settings n libtar-1.2.11 Appendix n mDNS 320.10.80 Copyright (c) 1998-2003 University of Illinois Board of Trustees Copyright (c) 1998-2003 Mark D. Roth All rights reserved.
Contents Connections Playback Settings n mongoose Appendix n openssl-1.0.0d https://github.
Contents Connections Playback Settings Tips Appendix n portmap-6.0 THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Contents Connections Playback Settings n pstdint.h-0.1.12 Appendix n rl78flash 2000.3.1 0 BSD License: License ======= The MIT License (MIT) Copyright (c) 2012 Maxim Salov 0 Copyright (c) 2005-2011 Paul Hsieh 0 All rights reserved.
Contents Connections Playback Settings n sqlite 2003.5.7 Appendix n strlcpy.c , v1.11 SQLite Copyright SQLite is in the Public Domain 0 Copyright (c) 1998 Todd C. Miller 0 Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.
Contents Connections Playback Settings n tinyxml 2002.4.3 Appendix n Tremor www.sourceforge.net/projects/tinyxml This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software. http://wiki.xiph.org/index.php/Tremor Copyright (c) 2002, Xiph.
Contents Connections Playback Settings Tips n zlib http://www.zlib.net/ zlib.h -- interface of the ‘zlib’ general purpose compression library version 1.2.3, July 18th, 2005 Copyright (C) 1995-2004 Jean-loup Gailly and Mark Adler This software is provided ‘as-is’, without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software.
. www.denon.com 288 3520 10507 00AD Copyright © 2017 D&M Holdings Inc. All Rights Reserved.
ENGLISH FRANÇAIS AVR-X3400H ESPAÑOL INTEGRATED NETWORK AV RECEIVER Quick Start Guide Guide de démarrage rapide / Guía de inicio rápido Read Me First.... Lisez-moi en premier.... / Lea esto primero.... Check our AVR setup tips online Please do not return this unit to the store. If you need help… Usa.denon.com/SetupTips Ca.Denon.com/SetupTips Call for Assistance 1-855-MY.DENON (USA) 1-800-668-0652 (Canada) 1-855-693-3666 Monday – Friday 10:00AM to 10:00PM E.S.T Saturday 12:00PM to 8:00PM E.S.
Welcome Before You Begin Required for Setup Thank you for choosing a Denon AV receiver. This guide provides step-by-step instructions for setting up your AV receiver. TV Speaker cables HDMI cable Subwoofer cable Speakers Optional or LAN cable Wi-Fi router t When connecting this unit to a device that is compatible with the Deep Color, 4K and ARC functions, use a “High Speed HDMI cable with Ethernet” that displays the HDMI logo.
What’s In the Box Quick Start Guide FM indoor antenna Safety Instructions AM loop antenna Notes on radio Sound calibration microphone Warranty (for North America model only) Cable labels Sound calibration microphone stand Receiver R03/AAA batteries Remote control unit (RC-1218) Power cord t The included sound calibration microphone stand is convenient for use when performing Speaker Calibration.
Setup There are four steps to the setup process.
2 Connecting the receiver 1) Place the receiver near your TV and connect the power cord TV Receiver Power cord (supplied) Connect to household power outlet (AC 120 V, 60 Hz) 4
2) Connect the receiver to your home network Wired LAN Wireless LAN Connect an Ethernet cable (not included) between your receiver and your network router. To LAN port Router 5 Rotate the two antennas located on the back of the receiver upwards for maximum performance.
3) Connect the receiver to your TV with an HDMI cable 4) Turn on the TV HDMI IN $5& HDMI cable HDMI OUT MONITOR 1 $5& TV remote control unit 5) Select the appropriate HDMI input on your TV HDMI INPUT or TV/ VIDEO Receiver (Rear panel) ARC (Audio Return Channel) : If your TV supports ARC, your TV can send audio back to the AV receiver when you are using your TV’s built-in video sources (TV tuner, Smart TV streaming services, etc…) ARC requires that you enable HDMI CEC on your TV.
6) Turn on the receiver t Press X to turn on the receiver. 7) Verify the connection t Verify that you can see this screen on your TV. AV Reciever Setup Assistant Please select a language... English Français Español If this screen is not displayed, please go back and retry the steps again in the recommended sequence.
3 Following the On-Screen Setup Assistant The Setup Assistant will walk you through connecting and configuring your speakers and components to your Denon receiver. Please use the remote control and follow the on-screen instructions. AV Reciever Setup Assistant Please select a language...
4 Downloading the Mobile Apps Download both the “HEOS” App and the “Denon 2016 AVR Remote” App for the full home entertainment experience. The HEOS App is required to access online music through your AVR. Denon 2016 AVR Remote HEOS The HEOS App allows you to explore, browse, and play music from many online streaming services or from your own music library. 9 Control your new AVR with the latest Denon 2016 AVR Remote App.
Owner’s Manual t For more information, visit www.denon.com t Refer to the Online Manual for other functions information and operation procedure details. manuals.denon.com/AVRX3400H/NA/EN/ Online Manual English Overview Connections Playback Contents WEB Manual INTEGRATED NETWORK AV RECEIVER AVR-X3400H Settings Tips Appendix PDF PDF Download INTEGRATED NETWORK AV RECEIVER Copyright © 2017 D&M Holdings Inc. All Rights Reserved.
www.denon.com Printed in Vietnam 5411 11483 00AD Copyright © 2017 D&M Holdings Inc. All Rights Reserved.
AVR-X3400H PRODUCT INFORMATION AVR-X3400H 7.2CH AV SURROUND RECEIVER WITH HEOS WORLD-CLASS HOME ENTERTAINMENT The AVR-X3400H 7.2 channel AV Surround Receiver offers the ultimate home theater experience with Dolby Atmos and DTS:X, plus unparalleled music playback options, thanks to built-in HEOS technology. HIGHLIGHTS YOUR BENEFITS 7.2 channel AV Receiver with 105W per channel (8 ohms, 20 Hz - 20 kHz, 0.08% THD) ® Enough power to fill medium size rooms with unique Denon sound Built-in Wi-Fi with 2.
Powerful 7 Channel Discrete Amplifier Featuring high current discrete power output devices on all channels, the AVR-X3400H delivers high power and is rated a 105 watts (8 ohm, 20 Hz - 20 kHz, 0.08% THD, 2ch Drive). There’s also an Auto Eco mode that adjusts the maximum power available according to the volume level as well as an on-screen Eco meter that lets you see the power consumption reduction in real time.
The Denon Extended Protection Plan Today's highly technical products are mechanically and electronically complex, and even the best equipment may need periodic attention that can result in costly repair bills. With the Denon Extended Protection Plan, there are no deductibles or hidden charges. Best of all, if your Denon product is unrepairable, we will replace it, absolutely free with a unit that has similar features and functionality.
Features & Benefits • • • • • • 1 00°/o coverage on parts & labor If unrepairable, we'll replace it! No deductibles or hidden charges Power surge protection Unlimited service calls Nationwide authorized service center network • Service representatives available to assist you 24 hours a day • No Lemon guarantee • Fully insured • Fully transferable
To start your Extended Protection Plan coverage: 1. Call us toll-free at (855) 720-0823 (US Residents Only) Have your model number, serial number, and purchase receipt available when calling. 2. Log on to http://servicecontracts.denon.com Copyright © 2011 D&M Holdings Inc. All Rights Reserved.
Safety Instructions DE NON (Read these safety instructions before operating the unit .) 0 SAFETY PRECAUTIONS CAUTION: CAUTIONS ON INSTALLATION To completely disconnect this product from the mains. disconnect the plug from the wall socket out let. The mains plug is used to completely interrupt the power supply to the unit and must be w1thin easy access by the user. For proper heat dispersal, do not install this unit in a confined space. such as a bookcase or similar enclosure. • Amphf1er: 0.
CAUTION (FOR AMPLIFIER) : CAUTIONS ON USING BATTERIES AVISOS SOBRE DE LAS PILAS HOT SURFACE. DO NOT TOUCH . The top surface over the internal heat sink may become hot when operating th is product continuously. Do not touch hot areas, especial ly around the "Hot suriace mark" and the top panel. • Insert the specified batteries in the remote control unit. • Replace the batteries with new ones if the set does not operate even when the remote control unit is operated close to t he unit .
Notes on radio DENON IC Information (For Canadian customers) FCC Information (For US customers) 1. COMPLIANCE INFORMATION • Product Name: Integrated Network AV Receiver 1. PRODUCT CONTAINS TRANSMITIER MODULE IC: 2581A-CV920C • Model Number: AVR· S720W I AVR· X1300W I AVR-$920W I AVR-X2300W J AVR-X3300W This product complies w 1th RSS-247 of Industry Canada. Operat1on rs subject to the fo llow1ng two cond1t ions: (1) this product may not cause harmful interference.
~ KOREA D II$Jl1C:BIJT.Q~$:Ul :zt<~litll>58!$1:¥::J\7Lo-O)Ji\\l!ilroi!~ili!zJJ l:tME'EL.
Congratulations on purchasing this Denon product! We invite you to join the Denon Owner's Club. Thank you for choosing Denon. Be the first to know about upcoming Den on products and get exclusive previews of new technologies. You will also receive members only offers from our online store and be the first in line for all promotions and contests. http://usa.denon.com/us/MyAccount/Pages/Login.aspx Join today! Please register your product at, USA Customers : http://usa.denon.
! ~-·•1••··""':""-''''''·..,. ··•••'··..,.··••••:·...,.··•••"·..,.··••••·-.-.··••••·-.-..···~···-..,. Th''"'"'"'Y ••II be hoomOO ooly "
DEN 0 N" l LIMITED WARRANTY 4 4 ~··•111··~··•111··~··1111··~······....·••111•·....··•111•·....··•111•·...··•111•·...··1111•·....··•111•·.....··•111•·.....·•tlll•·....··•lll•·.....·••••••·....··•lll•·.....··•lll•·...···•l••·....·••lll.........\ll•·....··•lll•·....·••lll•·...·lllll•·...··•lll•·....··•lll•·....··•lll•·...··•lll•·.-··•lll•·. .··•lll•..... ··•lll•·....···•l••·... ·••lll•·. .·•dll.
~-·••••··..,.··••••··...,..··••• • t t~ • ~ DEN0 N ' GARANTIE LIMITEE i4 .......,,,,,. ...,...,,.,. .,...,,.,,. ..,..,,,,"....,...,,,,,....,...,,,,t.....,..,,,,,. .,..,,,,,....,..,,,,,.....,.,,,,,....,...,,,,,...,...,,,,,......,..,,,,,....,..,,,,,....,..,,,,,...,.... ~~,~--..- · ·••••··..,.··••••··..,. ··•ll''·..,...··••••··..,.··dll•·..,. · ·••••··,...··••••··...-··••••··..,.··•ti•··..,.··••••·-..-· ·•U•··.,..··dl•·· ...,.··••••• ® Cctte garamie ne sera honoree qu ' au Canada.
