Owner's Manual

Table Of Contents
142
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
2 Video
Setting items Description Page
Picture Adjust Adjusts the video quality.
161
Picture Mode Select the desired picture mode according to the video content and your viewing environment.
161
Contrast Adjust picture contrast.
161
Brightness Adjust picture brightness.
161
Saturation Adjust picture chroma level (color saturation).
161
Hue Adjust green and red balance. Also called Tint.
161
Noise Reduction Reduce overall video noise.
162
Enhancer Emphasize picture sharpness.
162
HDMI Setup Makes settings for HDMI video/audio output.
162
Auto Lip Sync Make automatic compensation for timing shift in audio and video output.
162
HDMI Audio Out Select HDMI audio output device.
163
Video Output Selects which HDMI outputs to use.
163
HDMI Pass Through Selects how the AV receiver will pass HDMI signals to the HDMI output in standby power mode.
163
HDMI Control You can link operations with devices connected to HDMI and compatible with HDMI Control.
163
Pass Through Source The AV receiver will “pass through” the sources HDMI signal when in standby.
164
Power O Control Links the power standby of this unit to external devices.
164
Setting items Description Page
Graphic EQ Uses the graphic equalizer to adjust the tone of each speaker.
160
Speaker Selection Select whether to adjust tones for individual speakers or for all speakers.
160
Adjust EQ Adjust tonal balance for each frequency band. Adjust the speaker selected in “Speaker Selection”.
160
Curve Copy Copy “Audyssey Flat”curve from MultEQ® XT32.
160