Contents Connections Playback Settings Tips Appendix AVR-X4000 INTEGRATED NETWORK AV RECEIVER Owner’s Manual You can print more than one page of a PDF onto a single sheet of paper.
Contents Connections Playback Settings Tips Appendix Contents Connecting a playback device···················································· 40 Accessories························································································· 7 Connecting a set-top box (Satellite tuner/cable TV)························ 41 Connecting a DVD player································································ 42 Connecting a Blu-ray Disc player compatible with the Denon Link HD function··········
Contents Connections Playback Settings Playing an iPod················································································ 57 Display Rear panel Appendix Playing back files stored on a PC and NAS···························· 77 Listening to music on an iPod························································· 58 Setting operation mode (iPod Browse Mode)································· 59 Performing repeat playback (Repeat)·············································· 60 Performing
Contents Connections Playback Settings AirPlay function············································································ 101 Display Rear panel Appendix HDMI control function································································· 125 Streaming music stored in iPhone, iPod touch, or iPad directly to the unit····························································· 101 Playing iTunes music with this unit··············································· 102 Selecting multiple sp
Contents Connections Playback Settings Dialog Level··················································································· 150 Subwoofer Level··········································································· 150 Surround Parameter······································································ 151 Tone······························································································ 154 Restorer······································································
Contents Connections Playback Settings Language······················································································· 193 ZONE2 Setup / ZONE3 Setup······················································· 193 Zone Rename················································································ 195 Quick Select Names······································································ 195 Trigger Out 1 / Trigger Out 2························································· 195 Auto
Contents Connections Playback Settings Appendix Tips Thank you for purchasing this Denon product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference. Accessories Check that the following parts are supplied with the product.
Contents Connections Playback Settings Inserting the batteries Tips Operating range of the remote control unit q Slide the rear cover off the remote control unit in the arrow direction. Point the remote control unit at the remote sensor when operating it. Approx. 23 ft/7 m w Load the two batteries properly as indicated by the q and w marks in the battery compartment. 30° 30° R6/AA e Put the rear cover back on.
Contents Connections Playback Settings Tips Appendix Features • Discrete subwoofers and Audyssey Sub EQ HT™ (vpage 173) The unit has two subwoofer output capability and can adjust the level and delay for each subwoofer individually. Audyssey Sub EQ HT™ makes the integration seamless by first compensating for any level and delay differences between the two subwoofers and then applying Audyssey MultEQ® XT32 to both subwoofers together for improved deep bass response and detail.
Contents Connections Playback Settings • Equipped with Hybrid PLL Jitter Reducer capable of reducing jitter and phase noise that negatively affects sound quality Denon’s Hybrid Phase Lock Loop Jitter Reducer improves sound localization, reproducing a broad and natural soundstage.
Contents Connections Playback Settings • Supports HDMI (3D, ARC, Deep Color, “x.v.Color”, Auto Lip Sync, 4K) and HDMI control function (vpage 226) Advanced HDMI features are supported, including 3D passthrough, Audio Return Channel, Auto Lip Sync, Deep Color and “x.v.Color”, and HDMI CEC control functions. If a 4K digital video signal is input, it is passed through the unit unchanged, and the GUI overlay will adjust the resolution accordingly.
Contents Connections Playback Settings Tips Appendix Part names and functions Front panel u y q Front panel r t w e Display Rear panel 12 Remote Index
Contents u Connections y Playback t qw Settings Tips Appendix e Door r When you are using buttons and/or connectors behind the door, press the bottom of the door to open it. When not using buttons and/ or connectors behind the door, close it. Be careful not to catch your fingers when closing the door. e q Power operation button (X) This turns the power of MAIN ZONE on/off (standby) (vpage 55). r MASTER VOLUME knob w Power indicator This adjusts the volume level (vpage 56).
Contents Connections Playback Settings With the door open Tips Appendix r BACK button This returns to the previous screen (vpage 147). Q2 Q1 Q0 o t ENTER button This determines the selection (vpage 147). y SETUP button This displays the menu on the TV screen (vpage 147).
Contents Q8 Q7 Q6 Connections Playback Settings Tips Q5 Q4 Q3 Q3 Information button (INFO) This displays the status information on the TV screen (vpage 198). Q4 STATUS button Each press of this switches the status information that is shown on the display (vpage 59). Q5 ZONE3 SOURCE button This selects the input source for ZONE3 (vpage 138). Q6 ZONE3 ON/OFF button This turns the power of ZONE3 on/off (vpage 138). Q7 ZONE2 SOURCE button This selects the input source for ZONE2 (vpage 138).
Contents Connections Playback Settings Appendix Tips Display Q2 Q1 Q0 o i u yt r q w q Information display r Master volume indicator t MUTE indicator w Front speaker indicator y Sleep timer indicator The input source name, sound mode, setting values and other information are displayed here. This lights when the audio mute mode is selected (vpage 56). This lights according to the setting of the front A and B speakers. This lights when the sleep mode is selected (vpage 128).
Contents Q2 Connections Q1 Q0 Playback Settings Tips o o Tuner reception mode indicators These light according to the reception conditions when the input source is set to “HD Radio”. STEREO : In FM mode, this lights up when receiving stereo broadcasts. TUNED : Lights up when the broadcast is properly tuned in.
Contents Connections Playback Settings Appendix Tips Rear panel Q5 Q4 Q3 Q2 Q1 CBL/SAT 1 NETWORK TRIGGER OUT DVD 1 2 COAXIAL DIGITAL AUDIO RS-232C DC12V 150mA MAX.
Contents Connections Q2 Q1 Q0oiu CBL/SAT 1 NETWORK TRIGGER OUT DVD 1 2 COAXIAL DIGITAL AUDIO RS-232C DC12V 150mA MAX. 1 2 STRAIGHT CABLE HDMI 2 TV AUDIO IN (ASSIGNABLE) CD OPTICAL 1 CBL/SAT 3 Blu-ray 2 DVD MEDIA MEDIA 3 PLAYER PLAYER IN (ASSIGNABLE) Denon Link HD OUT 1 CBL/SAT 2 DVD 3 Blu-ray 4 MEDIA PLAYER 5 CD y PHONO COMPONENT VIDEO 1 CBL/SAT IN (ASSIGNABLE) AUDIO IN (ASSIGNABLE) FRONT 5 MEDIA PLAYER 6 AUX2 ZONE2 MONITOR1 Used to connect devices (vpage 37, 38, 44).
Contents Connections Playback Settings Tips Q5 Q4 Q3 CBL/SAT 1 NETWORK DVD 1 2 COAXIAL DIGITAL AUDIO TRIGGER OUT RS-232C DC12V 150mA MAX.
Contents Connections Playback Settings Tips Appendix Remote control unit q ZONE SELECT buttons (MAIN, 2, 3) q ZONE SELECT 2 3 w r TV w Operation mode indicators AVR DEVICE The “AVR” indicator lights when the unit is being operated. The “DEV.” indicator lights when an external device is being operated. The “TV” indicator lights when the TV is being operated.
Contents Connections Playback Settings Tips Appendix Q1 System buttons These perform playback related operations (vpage 57). • Skip buttons (8, 9) • Play button (1) • Search buttons (6, 7) • Pause button (3) • Stop button (2) Q3 ZONE SELECT 2 3 POWER MAIN DEV.
Contents Connections Playback Settings Tips Appendix Q8 VOLUME buttons (df) These adjust the volume level (vpage 56). Q9 OPTION button q ZONE SELECT 2 3 DEV. TV W0 ENTER button This determines the selection (vpage 147). AVR DEVICE W1 SETUP button TV MENU MENU CBL / SAT DVD TV AUDIO Blu-ray AUX1 TUNER AVR GAME AUX2 PHONO iPod/ USB NETWORK INTERNET RADIO MEDIA PLAYER This displays the option menu on the TV screen (vpage 104).
Contents Connections Playback Settings Tips Appendix Connections 22Cables used for connections Speaker connection (vpage 25) Provide necessary cables according to the devices you want to connect.
Contents Connections Playback Settings Tips Appendix Speaker connection Install speakers and connect them to this unit (vpage 25, 28). Speaker installation Determine the speaker system depending on the number of speakers you are using and install each speaker and subwoofer in the room. Here, we explain how to install the speakers using a typical example. FHL FHR FL FWL FL/FR : Place the FRONT left and right speakers an equal distance from the main listening position.
Contents Connections Playback Settings Appendix Tips 22Typical speaker layout % • This unit is compatible with Audyssey DSX® (vpage 241), Dolby Pro Logic gz (vpage 243) and DTS Neo:X (vpage 244) which offers an even wider and deeper surround sensation. When using Audyssey DSX®, install front wide speakers or front height speakers. When using Dolby Pro Logic gz, install front height speakers. • Use the illustration below as a guide for how high each speaker should be installed.
Contents Connections Playback Settings Tips 22When 5.
Contents Connections Playback Settings Carefully check the left (L) and right (R) channels and + (red) and – (black) polarities on the speakers being connected to this unit, and be sure to connect the channels and polarities correctly. Here we connect the speakers in the room to this unit. This section explains how to connect them using typical examples. NOTE • Disconnect this unit’s power plug from the power outlet before connecting the speakers. Also, turn off the subwoofer.
Contents Connections Playback Settings Tips 22Connecting the subwoofer Use a subwoofer cable to connect the subwoofer. Two subwoofers can be connected to this unit. To use two subwoofers, set “Subwoofer” to “2 spkrs” using the “Speaker Config.” (vpage 183) setting. The level and distance can be set separately for Subwoofer 1 and Subwoofer 2.
Contents Connections Playback Settings 22About the speaker cable label (supplied) for channel identification Speaker This unit Color White Red Green Light blue Blue Beige Brown Light purple Purple Light yellow Yellow Attach the speaker cable label for each channel to its speaker cable as shown in the diagram. Then, make connection so that the color of the speaker terminal matches that of the speaker cable label.
Contents Connections Playback Settings Appendix Tips 22Connecting 11.1-channel speakers The illustrations shows a connection example for performing 11.1-channel playback using surround back speakers.
Contents Connections Playback Settings Tips 22About the front B speaker connections Appendix • For how to connect the front, center, and surround speaker and the subwoofer to this unit, see “Connecting 11.1-channel speakers” (vpage 31). SURROUND BACK SURROUND BACK ASSIGNABLE IMPEDANCE : 6～16Ω FR (B) FL (B) % • When using this connection, also set “Assign Mode” in the menu to “5.1ch + Front B” (vpage 181).
Contents Connections Playback Settings Tips Appendix 22About the Bi-amp connection Some audiophile loudspeakers can be connected to an amplifier with two separate amp-to-speaker connections per each speaker. One amplifier channel’s output is hooked up to the speaker’s bass driver (woofer), while the other amplifier drives the upper range transducers (tweeter, or in some cases midrange and tweeter).
Contents Connections Playback Settings Tips Appendix 22About connecting front speakers exclusively for 2-channel playback You can connect the other from speaker for 2-channel playback using the DIRECT mode or STEREO mode. The speakers used exclusively fro multi-channel playback and the speaker used exclusively for 2-channel playback are automatically switched for playback in accordance with the sound mode.
Contents Connections Playback Settings Tips Appendix 22Connecting an external power amplifier • You can use this unit as a pre-amp by connecting an external power amplifier to the PRE OUT connectors. Adding an external power amplifier with a higher power output rating than this unit may be beneficial with loudspeakers that have lower efficiency and/or lower impedances, or to reach higher volume levels. • Select the terminal to use and connect the device.
Contents Connections Playback Settings Tips Connecting a TV Connect a TV to this unit so that the input video is output to the TV. You can also enjoy audio from the TV on this unit. How to connect a TV depends on the connectors and functions equipped on the TV. ARC function plays TV audio on this unit by sending the TV audio signal to this unit via HDMI cable.
Contents Connections Playback Settings Tips Appendix Connection 1 : TV equipped with an HDMI connector and compatible with the ARC (Audio Return Channel) Use an HDMI cable to connect a TV that is compatible with the ARC function to this unit. Set “HDMI Control” (vpage 163) to “On” when using a TV that supports the ARC function. TV HDMI IN (ARC) CBL/SAT 1 NETWORK TRIGGER OUT DVD 1 DIGITAL AUDIO RS-232C DC12V 150mA MAX.
Contents Connections Playback Settings Tips Appendix Connection 2 : TV equipped with an HDMI connector Use an HDMI cable to connect the TV to this unit. To listen to audio from TV on this unit, use an optical cable to connect the TV to this unit. TV CBL/SAT 1 NETWORK DVD 1 2 COAXIAL DIGITAL AUDIO TRIGGER OUT RS-232C DC12V 150mA MAX.
Contents Connections Playback Settings Tips Connection 3 : TV equipped without an HDMI connector Use a video or a component cable to connect the TV to this unit. To listen to audio from TV on this unit, use an optical cable to connect the TV to this unit. TV OUT IN COMPONENT VIDEO IN Y PB PR VIDEO IN OPTICAL OUT or CBL/SAT 1 NETWORK TRIGGER OUT DVD 1 DIGITAL AUDIO RS-232C DC12V 150mA MAX.
Contents Connections Playback Settings Tips Appendix Connecting a playback device This unit is equipped with three types of video input connectors (HDMI, component video and composite video) and three type of video output connectors (HDMI, component video and composite video). Select input connectors on this unit according to the connectors equipped on the device you want to connect. If the device connected to this unit is equipped with an HDMI connector, it is recommended to use HDMI connections.
Contents Connections Playback Settings Tips Connecting a set-top box (Satellite tuner/cable TV) This explanation uses the connection with a satellite tuner/cable TV STB as an example. Select input connectors on this unit according to the connectors equipped on the device you want to connect.
Contents Connections Playback Settings Tips Connecting a DVD player This explanation uses the connection with a DVD players as an example. Select input connectors on this unit according to the connectors equipped on the device you want to connect. (HDMI incompatible device) DVD player AUDIO AUDIO/ VIDEO HDMI OUT R L or or R L CBL/SAT 1 NETWORK TRIGGER OUT DVD 1 2 COAXIAL DIGITAL AUDIO RS-232C DC12V 150mA MAX.
Contents Connections Playback Settings Tips Appendix Connecting a Blu-ray Disc player compatible with the Denon Link HD function By making a Denon Link HD connection to a player compatible with the Denon Link HD function, you can enjoy higher quality playback compared with when only the HDMI connector connection is made. When making this connection, set “Input Assign” – “DIGITAL” (vpage 169) to “D.LINK”.
Contents Connections Playback Settings Tips Connecting a video camcorder or other device This explanation uses the connection with a video camcorders as an example. Connect a playback device to this unit, such as a video camcorder or game console.
Contents Connections Playback Settings Tips Appendix Connecting a record player This unit is compatible with turntables equipped with a moving magnet (MM) phono cartridge. When you connect to a turntable with a low output moving coil (MC) cartridge, use a commercially available MC head amp or a step-up transformer. If you set this unit’s input source to “PHONO” and you accidentally increase the volume without having a turntable connected, you may hear a hum noise from the speakers.
Contents Connections Playback Settings Tips Appendix Connecting an iPod or USB memory device to the USB port To connect an iPod to this unit, use the USB adapter cable that was supplied with the iPod. For operating instructions see “Playing an iPod” (vpage 57) or “Playing a USB memory device” (vpage 61). USB memory device iPod or % • Denon does not guarantee that all USB memory devices will operate or receive power.
Contents Connections Playback Settings Tips 22Supported iPod models • iPod classic • iPod nano • iPod touch • iPhone Front panel Display Rear panel 47 Remote Index Appendix
Contents Connections Playback Settings Appendix Tips Connecting an HD Radio receiver After connecting the antenna and receiving a broadcast signal (vpage 65 “Listening to HD Radio broadcasts”), fix the antenna with tape in a position where the noise level becomes minimal.
Contents Connections Playback Settings 22AM loop antenna assembly Appendix 22Using the AM loop antenna 1 Put the stand section through the bottom of the loop antenna from the rear and bend it forward. 2 Insert the projecting part into the square hole in the stand. Suspending on a wall Suspend directly on a wall without assembling. Nail, tack, etc. Standing alone Stand Loop antenna Tips Use the procedure shown above to assemble.
Contents Connections Playback Settings Appendix Tips Connecting to a home network (LAN) You can connect this unit to your home network (LAN) to perform various types of playbacks and operations as follows.
Contents Connections Playback Settings Tips % • When using this unit, we recommend you use a router equipped with the following functions: • Built-in DHCP server This function automatically assigns IP addresses on the LAN. • Built-in 100BASE-TX switch When connecting multiple devices, we recommend a switching hub with a speed of 100 Mbps or greater. • Use only a shielded STP or ScTP LAN cable which is easily available at electronics stores (CAT-5 or greater recommended).
Contents Connections Playback Settings Appendix Tips Connecting an external control device REMOTE CONTROL jacks TRIGGER OUT jacks If this unit is installed in a location that is out of range of the signal from the remote control unit (such as when installed in a cabinet), you can still operate the unit and the devices connected to it by using a commercially available IR receiver. You can also use it to remotely control ZONE2 and ZONE3 (another room).
Contents Connections Playback Settings Tips Connecting the power cord After completing all the connections, insert the power plug into the power outlet.
Contents Connections Playback Settings Tips Appendix Playback Turning the power on (vpage 55) Listening to Spotify (vpage 95) Selecting the input source (vpage 55) Adding to the FAVORITE STATION button (vpage 99) Adjusting the master volume (vpage 56) AirPlay function (vpage 101) Turning off the sound temporarily (vpage 56) Convenience functions (vpage 104) Playing a DVD player/Blu-ray Disc player (vpage 56) Selecting a sound mode (vpage 112) Playing an iPod (vpage 57) HDMI control function
Contents Connections Playback Settings Tips Appendix Basic operation POWER ZONE SELECT 2 3 MAIN DEV. TV 1 AVR DEVICE MENU CBL / SAT DVD INPUT TV AUDIO Blu-ray AUX1 TUNER AVR GAME AUX2 PHONO iPod/ USB MEDIA PLAYER CD NETWORK INTERNET RADIO % • You can also switch the power to standby by pressing X on the main unit. Selecting the input source FAVORITE STATION 1 2 3 4 1 InstaPrevue MUTE : Press POWER X to turn on power to the unit.
Contents Connections Playback Settings Adjusting the master volume 1 The following describes the procedure for playing DVD player/Blu-ray Disc player. Use VOLUME df to adjust the volume. • The variable range differs according to the input signal and channel level setting. % Turning off the sound temporarily Press MUTE :. • “MUTE” indicator on the display flashes. • : appears on the TV screen. 1 Prepare for playback. q Turn on the power of the TV, subwoofer and player.
Contents Connections Playback Settings Tips Appendix Playing an iPod ZONE SELECT 2 3 DEV. TV AVR DEVICE TV MENU MENU CBL / SAT DVD INPUT Blu-ray AUX1 TUNER AVR GAME AUX2 PHONO iPod/ USB CD NETWORK INTERNET RADIO MEDIA PLAYER • You can use the USB cable provided with the iPod to connect the iPod with the unit’s USB port and enjoy music stored on the iPod.
Contents Connections Playback Settings 22Operations available through the OPTION button Connect the iPod to the USB port (vpage 46). • Setting operation mode (iPod Browse Mode) (vpage 59) Press iPod/USB to switch the input source to “iPod/ USB”. “Browse From iPod” is displayed on the display of this unit. • Nothing is displayed on the TV screen. 3 Operate iPod itself directly while seeing the iPod screen to play back music. % • The iPod display modes include “From iPod” and “On-Screen”.
Contents Connections Playback Settings Setting operation mode (iPod Browse Mode) 4 1 Press OPTION. 2 Select “iPod Browse Mode”, then press ENTER. 3 Use o p to select “On-Screen”, then press ENTER. The option menu screen is displayed. ENTER • English letters, numbers and certain symbols are displayed. Incompatible characters are displayed as “.” (period). • Operations available for “On-Screen” and “From iPod” are listed below.
Contents Connections Playback Settings Performing repeat playback (Repeat) 1 4 Appendix Performing random playback (Random) Press OPTION with “iPod Browse Mode” set to “On-Screen”. 1 Use ui to select “Repeat”, then press ENTER. 2 3 Use ui to select “Random”, then press ENTER. 4 Press ENTER. The option menu screen is displayed. 2 3 Tips The option menu screen is displayed. Use o p to select repeat playback mode. Off (Default) : Repeat playback mode is canceled.
Contents Connections Playback Settings Tips Appendix Playing a USB memory device ZONE SELECT 2 3 DEV. TV AVR DEVICE TV MENU MENU CBL / SAT DVD INPUT Blu-ray AUX1 TUNER AVR GAME AUX2 PHONO iPod/ USB CD NETWORK INTERNET RADIO MEDIA PLAYER • Playing back music or viewing still picture (JPEG) files stored on a USB memory device. • Only USB memory devices conforming to mass storage class and MTP (Media Transfer Protocol) standards can be played on this unit.
Contents Connections Playback Settings Playing files stored on USB memory devices 1 Connect the USB memory device to the USB port (vpage 46). 2 Press iPod/USB to switch the input source to “iPod/ USB”.
Contents Connections Playback Settings Tips 22Operations available through the OPTION button • Searching content with keywords (Text Search) (vpage 107) • Performing repeat playback (Repeat) (vpage 105) • Performing random playback (Random) (vpage 105) • Playing back still images in sequential order (Slideshow Interval) (vpage 109) Front panel Display Rear panel 63 Remote Index Appendix
Contents Connections Playback Settings Tips Appendix Listening to HD Radio™ stations ZONE SELECT 2 3 DEV. TV AVR DEVICE TV MENU MENU CBL / SAT DVD INPUT Blu-ray AUX1 TUNER AVR GAME AUX2 PHONO iPod/ USB CD NETWORK INTERNET RADIO MEDIA PLAYER TV AUDIO FAVORITE STATION 1 2 3 4 InstaPrevue CH/PAGE df uio p ENTER BACK • HD Radio stations offer higher sound quality than conventional FM/ AM broadcasts.
Contents Connections Playback Settings Appendix Tips Listening to HD Radio broadcasts 1 • Adjacent to traditional main stations are extra local FM channels. These HD2/HD3 Channels provide new, original music as well as deep cuts into traditional genre. Press TUNER to switch the input source to “HD Radio”. GTV ScreenH HD Radio STEREO HD-AUTO Now Playing CH 1 TUNE+/- FM 92.
Contents 4 5 Connections Playback Settings FM : When listening to an FM broadcast. AM : When listening to an AM broadcast.
Contents Connections Playback Settings Tuning in by entering the radio frequency (Direct Tune) 1 2 Use ui to select “Direct Tune”, then press ENTER. 3 Use ui or 0 – 9 to select a number and press p. 4 Repeat step 3 and enter the frequency of the radio station you want to hear. 5 When setting is completed, press ENTER. You can change the mode for tuning into FM broadcasts. The option menu screen is displayed. The direct tuner screen is displayed and “–” in the display flashes.
Contents Connections Playback Settings Selecting audio programs Tips Listening to preset stations HD Radio Technology enables stations to broadcast multiple Audio Program and data services on HD2 / HD3 / HD4 channels. 1 Select the tuning mode (“HD-Auto”, “Auto” or “Manual”). 2 Press TUNE + or TUNE – to tune in the desired Multicast channel. 1 Use CH/PAGE df or 0 – 9 to select the desired preset channel.
Contents Connections Playback Settings Presetting the current broadcast station (Preset Memory) Channel Your favorite broadcast stations can be preset so that you can tune them in easily. Up to 56 stations can be preset. 9 – 16 1 Tune in the broadcast station you want to preset (vpage 65 “Listening to HD Radio broadcasts”). 17 – 24 2 Press OPTION. The option menu screen is displayed. 33 – 40 3 Use ui to select “Preset Memory”, then press ENTER.
Contents Connections Playback Settings Tuning in to radio stations and presetting them automatically (Auto Preset Memory) Tips Appendix Specify a name for the preset broadcast station (Preset Name) You can set the name to the preset broadcast station or change it. Up to eight characters can be input. Up to 56 stations can be preset. If “Auto Preset Memory” is performed after performing “Preset Memory”, the “Preset Memory” settings will be overwritten. 1 Press OPTION.
Contents Connections Playback Settings Skipping preset broadcast stations (Preset Skip) Press OPTION. 2 Use ui to select “Preset Skip”, then press ENTER. 3 nn To set the stations you want to skip by groups Appendix nn To set the stations you want to skip by stations q Use o p to select the group of broadcast stations you want to skip. w Use ui to select the broadcast station you want to skip. e Use o p to select “Skip”.
Contents Connections Playback Settings Check the HD Radio reception information 1 Tips % • If the station signal weakens while receiving a digital broadcast (while “HD” and text is displayed), the mode automatically switches to the analog reception mode (the reception frequency is displayed). Because of this, the “HD” and text may flicker if the station signal level is weak and unstable. Press STATUS on the main unit while an HD Radio broadcast is being received.
Contents Connections Playback Settings Tips Appendix Listening to Internet Radio ZONE SELECT 2 MAIN DEV. TV AVR DEVICE TV MENU NETWORK MENU CBL / SAT DVD INPUT TV AUDIO Blu-ray AUX1 TUNER AVR GAME AUX2 PHONO iPod/ USB MEDIA PLAYER CD NETWORK INTERNET RADIO FAVORITE STATION 1 2 3 4 InstaPrevue CH/PAGE df uio p ENTER BACK • Internet Radio refers to radio broadcasts distributed over the Internet. Internet Radio stations from around the world can be received.
Contents Connections Playback Settings Listening to Internet Radio 1 2 3 4 Prepare for playback. Appendix Tips Use ui to select the item you want to play, then press ENTER. • Check the network environment, then turn on this unit’s power (vpage 50 “Connecting to a home network (LAN)”). Internet Radio Press NETWORK. [1/7] zzzzz • You can also press INTERNET RADIO to select the input source “Internet Radio” directly. Search Stations Search Podcasts Recommended Stations radiodenon.
Contents Connections Playback Settings radiodenon.com : • Displays Internet Radio stations added to favorites in vTuner. For instructions on how to add to favorites in vTuner, see “Using vTuner to add Internet Radio stations to favorites” (vpage 76). Recently Played : • Displays recently played Internet Radio stations. Up to 20 stations can be stored in “Recently Played”. Search by Keyword : • Displays Internet Radio stations searched by keyword. For character input, see page 148.
Contents Connections Playback Settings Using vTuner to add Internet Radio stations to favorites 5 Check the MAC address of this unit (vpage 189 “Information”). • The MAC address is necessary when you create an account for vTuner. 2 Use your PC to access the vTuner website (http://www. radiodenon.com). 3 4 Enter the MAC address of this unit, then click “Go”. Display Rear panel Select the search criteria (genre, region, language, etc.) of your choice.
Contents Connections Playback Settings Tips Appendix Playing back files stored on a PC and NAS ZONE SELECT 2 3 DEV. TV AVR DEVICE TV MENU NETWORK MENU CBL / SAT DVD INPUT Blu-ray AUX1 TUNER AVR GAME AUX2 PHONO iPod/ USB CD NETWORK INTERNET RADIO MEDIA PLAYER TV AUDIO FAVORITE STATION 1 2 3 4 InstaPrevue CH/PAGE df uio p ENTER BACK • This unit can play back music files and playlists (m3u, wpl) stored on a PC and on Network Attached Storage (NAS) that supports DLNA.
Contents Connections Playback Settings Tips Appendix Applying media sharing settings Here, we apply the settings to share music files stored on a PC and NAS on the network. If you are using a Media Server, be sure to apply this setting first. 22When using Windows Media Player 12 (Windows 7 / Windows 8) 1 2 3 Start up Windows Media Player 12 on the PC. 4 Select “Allowed” in the drop-down list for “Media programs on this PC and remote connections...”. 5 Click “OK” to finish.
Contents Connections Playback Settings Playing back files stored on a PC and NAS Use this procedure to play music files, image files or playlists. 1 Prepare for playback. 2 3 Press NETWORK. q Check the network environment, then turn on this unit’s power (vpage 50 “Connecting to a home network (LAN)”). w Prepare the computer (vComputer’s operating instructions). Use ui to select the server including the file to be played, then press ENTER. 5 Use ui to select the file, then press ENTER.
Contents Connections Playback Settings • The display switches between track title, artist name, and album title each time the STATUS button is pressed. • When a WMA (Windows Media Audio), MP3 or MPEG-4 AAC file includes album art data, the album art can be displayed while the music files are playing. • If you use Ver.11 or later of Windows Media Player, the album art for WMA files can be displayed.
Contents Connections Playback Settings Tips Appendix Viewing photographs on the Flickr site ZONE SELECT 2 3 DEV. TV AVR DEVICE TV MENU NETWORK MENU CBL / SAT DVD INPUT Blu-ray AUX1 TUNER AVR GAME AUX2 PHONO iPod/ USB CD NETWORK INTERNET RADIO MEDIA PLAYER • Flickr is an online photograph sharing service that started in 2004. You can use the this unit to view photographs that have been made public by Flickr users. You do not need an account to use Flickr.
Contents Connections Playback Settings Viewing photographs shared by particular users 1 2 3 4 Appendix Tips Use ui to select “Add Flickr Contact”, then press ENTER. Prepare for playback. Flickr • Check the network environment, then turn on this unit’s power (vpage 50 “Connecting to a home network (LAN)”). [1/2] Add Flickr Contact All Content Press NETWORK. Use uio p to select “Flickr”, then press ENTER.
Contents 7 Connections Playback Settings 8 Use ui to select the folder, and then press ENTER. Favorites : • Displays the favorite photographs of the specified user. Photostream : • Displays a list of shared photographs. PhotoSets : • Displays the folder (photograph album) list. Contacts : • Displays the screen name used by the specified user in Contacts. Remove this Contact : • Deletes a user from Flickr Contact. Add this Contact : • Adds a user from Flickr Contact.
Contents Connections Playback Settings • Depending on the file format, some photographs may not be viewable. 22Operations available through the OPTION button Use ui to select “All Content”, then press ENTER.
Contents Connections Playback Settings Tips Appendix Listening to Pandora® ZONE SELECT 2 3 DEV. TV AVR DEVICE TV MENU NETWORK MENU CBL / SAT DVD INPUT Blu-ray AUX1 TUNER AVR GAME AUX2 PHONO iPod/ USB CD NETWORK INTERNET RADIO MEDIA PLAYER Pandora is an automated music recommendation and Internet Radio service created by the Music Genome Project. To listen to Pandora you will need a free Pandora account. If you do not have a Pandora account, you can create one at www.pandora.
Contents Connections Playback Settings Listening to Pandora® 1 Prepare for playback. 2 3 Press NETWORK. 4 Appendix If you have a Pandora account, use ui to select “I have a Pandora account”, then press ENTER. • If you do not have a Pandora account, press i to select “I am new to Pandora”. The URL of Pandora and activation code are displayed. Access the Pandora web page from your PC and register the displayed activation code and account information. Then press ENTER.
Contents 5 Connections Playback Settings Appendix Tips Creating a new station Input “Email address” and “Password”. You can create up to 100 radio stations. Pandora Account 1 Email address Use ui to select “New Station”, then press ENTER. Password My Station [1/4] New Station OK Quick Mix Music1 Radio Exit Enter Email address BACK Sign Out • For character input, see page 148. • Press BACK to cancel the input. When “Cancel Input?” is displayed, select “Yes”, then press ENTER.
Contents 3 Connections Playback Settings Operation buttons 1 3 2 9 Use ui to select “Search by Artist” or “Search by Track”, then press ENTER. You can search and display a list by track or artist.
Contents Connections Playback Settings Listening to an existing station 1 Tips Listening to created radio stations at random Use ui and select the radio station (“Music2 Radio”) that you want to listen to, and press ENTER. 1 Music2 Radio Use ui to select “Quick Mix”, then press ENTER. Created radio stations are selected at random, and tracks are streamed.
Contents Connections Playback Settings Giving Feedback and Managing Stations Press p while a track is playing. The Pandora menu screen is displayed. Menu [1/8] I like this track I don’t like this track Why is this track playing? Create station Bookmark this artist Bookmark this track I’m tired of this track % • You can create up to 100 Stations (radio stations). I like this track : • Press when you like the track that is being played. • It will return to the Play Screen.
Contents Connections Playback Settings Disassociate this unit from your Pandora account. • Displaying your desired video on the monitor during audio playback (Video Select) (vpage 109) • Adjusting the picture quality for your viewing environment (Picture Mode) (vpage 110) • Playing music in All Zone Stereo (vpage 111) Use ui to select “Sign Out”, then press ENTER. My Station [4/4] New Station Quick Mix Are you sure you want to sign out D&M1 Radio xxxxx_xxxxxxx@dm-holdings.
Contents Connections Playback Settings Tips Appendix Listening to SiriusXM Internet Radio ZONE SELECT 2 3 DEV. TV AVR DEVICE TV MENU NETWORK MENU CBL / SAT DVD INPUT Blu-ray AUX1 TUNER AVR GAME AUX2 PHONO iPod/ USB CD NETWORK INTERNET RADIO MEDIA PLAYER Enjoy anywhere access to the unparalleled content of SiriusXM. Whether on your computer, smartphone, tablet, Lynx Portable Enjoy anywhere access to the unparalleled content of SiriusXM.
Contents 3 Connections Playback Settings 5 Use uio p to select “SiriusXM”, then press ENTER. Appendix Tips Input the “Username” and “Password”. SiriusXM Sign in Network Favorites Internet Radio Username zzzzz Password zzzzz Media Server Spotify Sign in BACK 4 Select “Sign in”, then press ENTER. Exit Enter • For character input, see page 148. SiriusXM Sign in Please set your SiriusXM username and password. You can go to www.siriusxm.com to sign up for an account.
Contents Operation buttons 1 2 ENTER CH/PAGE df Connections Playback Settings Tips 22Operations available through the OPTION button Function Playback Stop Playback (Press and hold) Stop Page previous / Page next • Displaying your desired video on the monitor during audio playback (Video Select) (vpage 109) • Adjusting the picture quality for your viewing environment (Picture Mode) (vpage 110) • Playing music in All Zone Stereo (vpage 111) Sign Out Disassociate this unit from your SiriusXM account.
Contents Connections Playback Settings Appendix Tips Listening to Spotify ZONE SELECT 2 3 MAIN DEV. TV AVR DEVICE TV MENU NETWORK MENU CBL / SAT DVD INPUT Blu-ray AUX1 TUNER AVR GAME AUX2 PHONO iPod/ USB CD NETWORK INTERNET RADIO MEDIA PLAYER Introduce your Denon to a whole new world of music. With Spotify, you can enjoy instant access to millions of songs. A Spotify Premium subscription is required. For details, see the Spotify homepage. http://www.spotify.
Contents 4 Connections Playback Settings If you have a Spotify account, then press ENTER. GUpper case characters/Numbers/SymbolsH ABCDEFGHIJKLMNOPQRSTUVWXYZ ÄÀÁÂÃÅÆÇÐÈÉÊËÌÍÎÏÑÖÒÓÔÕØÜÙÚÛÝÞ 0123456789 !“#$%&’()z+,;<=> GLower case characters/Numbers/SymbolsH abcdefghijklmnopqrstuvwxyz äàáâãåæçðèéêëìíîïñöòóôõøüùúûýþÿß 0123456789 .@-_/:˜?[\]^’{|} Introduce your Denon to a whole new world of music. With Spotify, you can enjoy instant access to millions of songs. A Spotify Premium subscription is required.
Contents 6 Connections Playback Settings 8 After inputting the username and password, select “Log In”, then press ENTER. If the username and password match, the top menu for Spotify is displayed. 7 Appendix Tips Use ui to select a station, and press ENTER to start playback. Playback starts and the following screen appears. Use ui to select menu and then press ENTER.
Contents 9 Connections Playback Settings Press p while a track is playing. • The display switches between track title, artist name, and album title each time the STATUS button is pressed.
Contents Connections Playback Settings Tips Appendix Adding to the FAVORITE STATION button ZONE SELECT 2 3 MAIN DEV. TV TV MENU MENU CBL / SAT DVD INPUT Blu-ray AUX1 TUNER AVR GAME AUX2 PHONO iPod/ USB CD NETWORK INTERNET RADIO TV AUDIO FAVORITE STATION 1 1 AVR DEVICE MEDIA PLAYER With a single press of these, you can call up registered radio stations and contents You can add up to four types of content.
Contents Connections Playback Settings Tips Playing back content added to the FAVORITE STATION button You can easily call up content by pressing the FAVORITE STATION button. 1 Press one of the FAVORITE STATION 1 – 4 buttons that you added content to. Playback starts. % • Internet Radio stations are already registered to the FAVORITE STATION 1 – 4 buttons. However, you may not be able to play the stations due to restrictions imposed by the radio stations.
Contents Connections Playback Settings Appendix Tips AirPlay function Enjoy music from your iTunes library with high quality sound anywhere in your home. Streaming music stored in iPhone, iPod touch, or iPad directly to the unit PC If you update your “iPhone/iPod touch/iPad” to iOS 4.2.1 or later, you can stream music stored in your “iPhone/iPod touch/iPad” directly to this unit. This unit Router 1 Make the Wi-Fi settings for iPhone, iPod touch, or iPad.
Contents Connections Playback Settings Playing iTunes music with this unit 1 Install iTunes 10, or later, on a Mac or Windows PC that is connected to the same network as this unit. 2 Turn this unit ON. Selecting multiple speakers (devices) It is possible to play iTunes songs on your home’s AirPlay compatible speakers (devices) other than those of this unit. 1 2 Set “IP Control” (vpage 189) to “Always On” for this unit. NOTE Click the AirPlay icon ' and select “Multiple”.
Contents Connections Playback Settings Perform iTunes playback operations with the remote control unit of this unit Devices Preferences General With this unit’s remote control unit, you can perform iTunes song play, pause, and auto search (cue) operations. 1 2 3 Appendix Tips Playback Sharing Store Parental Devices Advanced Device backups: Select “Edit” – “Preferences...” on the menu. Select “Devices” in the iTunes setting window. Delete Backup ...
Contents Connections Playback Settings Tips Appendix Convenience functions ZONE SELECT 2 3 DEV. TV MAIN AVR DEVICE TV MENU NETWORK MENU CBL / SAT DVD INPUT Blu-ray AUX1 TUNER AVR GAME AUX2 PHONO iPod/ USB CD NETWORK INTERNET RADIO MEDIA PLAYER Here, we explain how to use the convenience functions. The source names under the titles of each function’s description are sources that allow use of these functions.
Contents Connections Playback Settings Performing repeat playback (Repeat) Tips Appendix Performing random playback (Random) nn Supported input sources : USB / Media Server / Spotify nn Supported input sources : USB / Media Server / Spotify 1 While content is playing, press OPTION. 1 While content is playing, press OPTION. 2 3 Use ui to select “Repeat”, then press ENTER. 2 3 Use ui to select “Random”, then press ENTER. 4 Press ENTER. 4 The option menu screen is displayed.
Contents Connections Playback Settings Add to favorites from the Option menu (Save to Favorites) Playing back content added in “Save to Favorites” You can add up to 100 items as favorites for Internet Radio and Media Server. 1 2 nn Supported input sources : Internet Radio / Media Server 1 While content is playing, press OPTION. 2 Use ui to select “Save to Favorites”, then press ENTER. Appendix Tips Press NETWORK. Use uio p to select “Favorites”, then press ENTER.
Contents Connections Playback Settings Deleting content added to favorites (Remove from Favorites) 1 2 3 Appendix Searching content with keywords (Text Search) Press NETWORK. nn Supported input sources : USB / Internet Radio / Media Server Use uio p to select “Favorites”, then press ENTER. 1 While content is playing, press OPTION. Use ui to select the content you want to delete from favorites, then press OPTION. 2 Use ui to select “Text Search”, then press ENTER.
Contents Connections Playback Settings Tips Appendix Playing back music and a favorite picture at the same time (Slideshow) nn Supported input sources : USB nn Supported input sources : Internet Radio / Media Server 1 Play back a still picture. 1 Play back a still picture. 2 3 Play back a music file (vpage 62). 2 Play back a music file of Media Server or Internet Radio station (vpage 74, 79). Press OPTION. 3 Press OPTION. 4 Use ui to select “Slideshow”, then press ENTER.
Contents Connections Playback Settings Playing back still pictures in sequential order (Slideshow Interval) Tips Appendix Displaying your desired video during audio playback (Video Select) You can play back still picture (JPEG) files stored on a USB memory device or Media Server and pictures on Flickr website as a slide show. The display time can also be set. This unit can display video from a different source on TV during audio playback. You can set this for each input source.
Contents Connections Playback Settings Adjusting the picture quality for your viewing environment (Picture Mode) 3 Use o p to select picture mode. 4 Press ENTER. nn Supported input sources : CBL/SAT / DVD / Blu-ray / GAME/ AUX1 / AUX2 / MEDIA PLAYER / USB / NETWORK / CDz / TV AUDIOz zz You can set the picture mode when an HDMI, component video or video connector is assigned. 1 While content is playing, press OPTION. 2 Use ui to select “Picture Mode”, then press ENTER.
Contents Connections Playback Settings You can play back music in another room (ZONE2/ZONE3) simultaneously that is played back in MAIN ZONE. It is useful when you want to enjoy the same music at the same time in multiple rooms during home party or when you want to play back the same BGM in the entire house. The All Zone Stereo function can be set for any source. % • Before setting this function, you need to turn on the another room (ZONE2/ZONE3) for which you want to use the All Zone Stereo function.
Contents Connections Playback Settings Tips Appendix Selecting a sound mode ZONE SELECT 2 3 MAIN DEV. TV AVR DEVICE TV MENU MENU CBL / SAT DVD INPUT Blu-ray AUX1 TUNER AVR GAME AUX2 PHONO iPod/ USB CD NETWORK INTERNET RADIO MEDIA PLAYER This unit allows you to enjoy various kinds of surround and stereo playback modes.
Contents Connections Playback Settings Appendix 22Switching the sound mode Selecting a sound mode 1 Tips • Press and hold MOVIE, MUSIC or GAME displays a list of the sound modes that can be selected. Each time you press MOVIE, MUSIC or GAME, the sound mode changes. • While the list is displayed, you can also use ui to select a sound mode. • Try out various surround playback modes and enjoy surround playback in your favorite mode. Press MOVIE, MUSIC or GAME to select a sound mode.
Contents Connections Playback Settings Direct playback Appendix Pure Direct playback Sound recorded in source is played as is. 1 Tips This mode is for playback with higher sound quality than in “DIRECT” mode, by turning off the front panel display panel, which can eliminate faint low level noise from creeping into sensitive analog circuitry. Press PURE to select “DIRECT”. Direct playback begins. 1 % • While DSD signals are played back, “DSD DIRECT” is displayed.
Contents Connections Playback Settings Tips Appendix 22Description of sound mode types Dolby sound mode Sound mode type DOLBY PLgxz1 DOLBY PLg DOLBY PLgzz2 DOLBY DIGITAL DOLBY DIGITAL EXz1 DOLBY TrueHD DOLBY DIGITAL Plus Description This mode can be selected when the Dolby Pro Logic gx decoder is used to play back 2-channel sources in 6.1/7.1-channel surround sound including the surround back channel(s).
Contents Connections Playback Settings Tips Appendix DTS sound mode Sound mode type DTS NEO:Xz1 DTS SURROUND DTS ES DSCRT6.1z2 DTS ES MTRX6.1z3 DTS 96/24 DTS-HD DTS Express Description This matrix decoding technology uses the DTS NEO:X decoder to playback 2-channel source or 5.1/6.1/7.1-channel surround sound including the surround back channel. There are 3 modes: “Music” suited for playing music, “Cinema” suited for playing movies, and “Game” which is optimized for playing games.
Contents Connections Playback Settings Tips Appendix Audyssey DSX® sound mode Sound mode type Audyssey DSX® (A-DSX)z Description This mode creates playback for the new channels (front wide or front height) in 5.1-channel systems. By adding front wide or front height channels, the surround sound effects sound become more three dimensional and realistic.
Contents Connections Playback Settings Tips Appendix Stereo sound mode Sound mode type STEREO Description This mode plays 2-channel stereo audio with no additional surround sound processing. • Sound is output from the front left and right speakers, and subwoofer if connected. • When multi-ichannel signals are inputted, they are mixed down to 2-channel audio and are played back with no additional surround sound processing.
Contents Connections Playback Settings Appendix Tips 22Sound mode • The following sound modes can be selected using the MOVIE, MUSIC, GAME, and PURE buttons. • Adjust the sound field effect with the menu “Surround Parameter” (vpage 151) to enjoy surround sound the way you like it.
Contents Connections Input signal Multi-channel z4 Dolby Digital Dolby TrueHD Playback Settings Sound mode NOTE STEREO DOLBY DIGITAL DOLBY DIGITAL EX DOLBY DIGITAL + PLgx Cinema DOLBY DIGITAL + PLgx Music DOLBY DIGITAL + PLgz DOLBY DIGITAL A-DSX DOLBY DIGITAL + PLgx Cinema A-DSX DOLBY DIGITAL + PLgx Music A-DSX DOLBY DIGITAL + NEO:X Cinema DOLBY DIGITAL + NEO:X Music DOLBY DIGITAL + NEO:X Game DOLBY TrueHD DOLBY TrueHD + EX DOLBY TrueHD + PLgx Cinema DOLBY TrueHD + PLgx Music DOLBY TrueHD + PLgz DO
Contents Connections Playback Settings Appendix Tips MOVIE Sound mode MUSIC GAME DOLBY DIGITAL Plus S S S DOLBY DIGITAL Plus + EX S S S S S S S S Input signal Sound mode NOTE Multi-channel z4 DOLBY DIGITAL Plus + PLgx Cinema S DOLBY DIGITAL Plus + PLgx Music DOLBY DIGITAL Plus + PLgz S Dolby Digital Plus DOLBY DIGITAL Plus A-DSX z5 S DOLBY DIGITAL Plus + PLgx Cinema A-DSX z3 S DOLBY DIGITAL Plus + PLgx Music A-DSX z3 DOLBY DIGITAL Plus + NEO:X Cinema S DOLBY DIGITAL Plus + NEO:X Music
Contents Connections Playback Settings MOVIE Sound mode MUSIC GAME DTS-HD HI RES S S S DTS-HD MSTR S S S S S S S S S S S S Input signal Sound mode NOTE DTS-HD MSTR A-DSX z5 DTS Express DTS Express A-DSX DTS-HD / DTS Express z5 DTS-HD + PLgx Cinema S DTS-HD + PLgx Music S DTS-HD + PLgz DTS-HD HI RES A-DSX z5 DTS-HD + NEO:X Cinema Multi-channel z4 Appendix Tips S S S S S S S DTS-HD + NEO:X Music S DTS-HD + NEO:X Game S MULTI CH IN S S S MULTI CH IN 7.
Contents Connections Input signal Multi-channel z4 Playback Settings Sound mode NOTE MULTI CH STEREO MONO MOVIE ROCK ARENA JAZZ CLUB MATRIX VIDEO GAME VIRTUAL Appendix Tips z3 z3 z3 z3 z3 z3 z3 MOVIE S S Sound mode MUSIC GAME S S S S S S S S S z3 This mode cannot be selected when DSD signals from Super Audio CD are input. z4 Some sound modes cannot be selected, depending on the audio format or number of channels of the input signal.
Contents Connections Playback Settings Tips 22Views on the display Blu-ray DOLBY D + PL z q w q Shows a decoder to be used. • A DOLBY DIGITAL Plus decoder is displayed as “DOLBY D +”. w Shows a decoder that creates sound output from the surround back speakers. • “+ PLgz” indicates the front height sound from front height speakers.
Contents Connections Playback Settings Tips Appendix HDMI control function A recent addition to the HDMI standard is CEC (Consumer Electronics Control), which allows control signals from one device to communicate with another device via the HDMI cable connection. Not all HDMI-equipped devices have this capability. Setting procedure 1 NOTE Set the HDMI output connector corresponding with the HDMI control function. • Some functions may not operate depending on the connected TV or player.
Contents Connections Playback Settings Tips Appendix InstaPrevue function MAIN ZONE SELECT 2 DEV. TV AVR DEVICE TV MENU MENU CBL / SAT DVD INPUT Blu-ray AUX1 TUNER AVR GAME AUX2 PHONO iPod/ USB CD NETWORK INTERNET RADIO MEDIA PLAYER You can display sub screens on the main screen to preview playback video of the HDMI input connected to this unit.
Contents Connections Playback Settings Switching input sources Press MAIN to switch the zone mode. 2 Press InstaPrevue. 3 You can change the display location of sub screens to a desired location. MAIN lights. 1 While sub screens are displayed, press OPTION. The main screen (current input video) and sub screens (other input video) are displayed. 2 Press i to select “Location” and use o p to select the location where you want to display sub screens.
Contents Connections Playback Settings Tips Appendix Sleep timer function ZONE2 ZONE3 ZONE SELECT 2 3 POWER MAIN DEV. TV MAIN AVR DEVICE TV MENU DVD Blu-ray AUX1 TUNER AVR GAME AUX2 PHONO iPod/ USB NETWORK INTERNET RADIO INPUT CD Using the sleep timer MENU CBL / SAT MEDIA PLAYER You can have the power automatically switched to standby once a set time has elapsed. This is convenient for viewing and listening while going to sleep.
Contents Connections Playback Settings Tips Appendix Quick select function You can save settings such as the input source selection, volume level, and sound mode at the QUICK SELECT 1 – 4 buttons. You can simply press one of the set QUICK SELECT buttons for subsequent playback to switch to various saved settings all at once. By saving frequently used settings at the QUICK SELECT 1 – 4 buttons, you will always be able to easily call up the same playback environment.
Contents Connections Playback Settings Tips Appendix Rec out function 3 MAIN DEV. TV This unit AVR DEVICE Recorder TV MENU MENU CBL / SAT DVD INPUT TV AUDIO Blu-ray AUX1 TUNER AVR GAME AUX2 PHONO iPod/ USB CD NETWORK INTERNET RADIO MEDIA PLAYER FAVORITE STATION 1 When using the audio/video recording connectors (MEDIA PLAYER outputs), you can record the audio or video.
Contents Connections Playback Settings Tips Recording on an External Device 1 Press the input source select button to choose the input source to be recorded. 2 Start recording. • For operating instructions, refer to the respective device’s operating instructions. % • Recordings you make are for your personal enjoyment and should not be used for other purposes without permission of the copyright holder.
Contents Connections Playback Settings Appendix Tips Web control function You can control this unit from a web control screen on a web browser. Controlling the unit from a web control PC Router This unit 1 Switch the “IP Control” (vpage 189) setting to “Always On”. 2 Check the IP address of this unit with “Information” (vpage 189). Network/Information % Denon AVR-X4000 On 192.168.100.
Contents 4 Connections Playback Settings Enter the IP address of this unit in browser’s address box. % 5 http://192.168.100.19/index.asp Edit View Favorites Tools Help INDEX When thehttp://192.168.100.19/index.asp top menu is displayed, click on the menu item Edit View Favorites Tools Help youFile want to operate. Denon AVR-X4000 INDEX Web Controller MAIN ZONE Web Controller Denon AVR-X4000 0.0 CBL/SAT MAIN ZONE CBL/SAT 0.
Contents Connections Playback Settings Appendix Tips Playback in ZONE2/ZONE3 (Separate room) You can operate this unit to enjoy video and audio in a room (ZONE2 and ZONE3) that is different from the room where this unit is placed (MAIN ZONE). You can simultaneously play back the same source in both the MAIN ZONE, ZONE2 and ZONE3. You can also play back separate sources in the MAIN ZONE, ZONE2 and ZONE3.
Contents Connections Playback Settings Appendix Tips 22Connection 2 : Connection through the video output connector and speaker output connector • When “Assign Mode” (vpage 181) in the menu is set to any of the following audio is output from speakers in ZONE2 or ZONE3. nn Assign Mode : 5.1ch + ZONE2 nn Assign Mode : 5.
Contents Connections Playback Settings Appendix Tips nn Assign Mode : 5.
Contents Connections Playback Settings Appendix Tips 22Connection 3 : Connection through the video output connector and external amp The audio signals of this unit’s ZONE2 and ZONE3 audio output connectors are output to the ZONE2 and ZONE3 amplifiers and played on these amplifiers.
Contents Connections Playback Settings Playback in ZONE ZONE2 ZONE3 POWER ZONE SELECT 2 3 MAIN DEV. TV INPUT Blu-ray AUX1 TUNER AVR GAME AUX2 PHONO iPod/ USB CD NETWORK INTERNET RADIO 2 3 4 CH/PAGE VOLUME MUTE INFO VOLUME df OPTION ENTER Press the input source select button to select the input source to be played. • Also press input source select button when in standby mode, the power turns on. • When POWER X is pressed, ZONE2 or ZONE3 turns off.
Contents Connections Playback Settings Tips 22Turning off the sound temporarily Press MUTE :. The sound is reduced to the level set at “Mute Level” (vpage 195) in the menu. • To cancel, either adjust the volume or press MUTE : again. • You can also adjust the volume level to cancel the muting. % • You can adjust the tone and volume for ZONE2 or ZONE3 in “ZONE2 Setup” or “ZONE3 Setup” (vpage 193) in the menu.
Contents Connections Playback Settings Tips Appendix Settings Menu map For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page. By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences. 22Audio Setting items Description Page Dialog Level Sets the output level to clarify the dialogue output from the center channel.
Contents Connections Playback Settings Setting items Tone Tips Appendix Description Page Adjusts the tonal quality of the sound. 154 Tone Control Set the tone control function to “On” and “Off”. 154 Bass Adjust bass. 154 Treble Adjust treble. 154 Restorer Expands the low and high frequency components of compressed audio content such as MP3 files to enable richer audio playback. 155 Audio Delay Compensates for incorrect timing between video and audio.
Contents Connections Playback Settings Setting items Graphic EQ Tips Description Appendix Page Uses the graphic equalizer to adjust the tone of each speaker. 160 Speaker Selection Select whether to adjust tones for individual speakers or for all speakers. 160 Adjust EQ Adjust tonal balance for each frequency band. Adjust the speaker selected in “Speaker Selection”. 160 Curve Copy Copy “Audyssey Flat”curve from MultEQ® XT32.
Contents Connections Playback Settings Setting items Output Settings Tips Description Appendix Page Makes screen-related settings. 165 Video Mode Make settings for video processing. 165 Video Conversion The input video signal is converted automatically in conjunction with the connected TV. 165 i/p Scaler Convert the input source resolution to the resolution set. 165 Resolution Set the output resolution.
Contents Connections Playback Settings Tips Appendix 22Speakers Description Page Audyssey® Setup Setting items The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. 172 Manual Setup Perform when setting the speakers manually or when changing settings made in Audyssey® Setup. 181 Amp Assign Select power amplifier usage method to match your speaker system. 181 Speaker Config.
Contents Connections Playback Settings Tips Appendix 22General Setting items Description Page Language Sets the language for display the menu on the TV screen. 193 ZONE2 Setup / ZONE3 Setup Makes settings for audio playback with multi-zone (ZONE2, ZONE3). 193 Bass Adjust bass tones. 193 Treble Adjust treble tones. 193 High Pass Filter Make settings for cutting the low range to reduce distortion in the bass. 193 Lch Level Adjust the left channel output level.
Contents Connections Playback Settings Setting items Information Tips Appendix Description Page Show information about receiver settings, input signals, etc. 197 Audio Shows information about audio input signals. 197 Video Shows information about video input signal and HDMI Monitor. 197 ZONE Shows information about each zone. 197 Firmware Displays system information. 197 Notifications Selects notification message preferences.
Contents Connections ZONE SELECT 2 POWER MAIN 3 DEV. TV Settings TV MENU MENU CBL / SAT DVD INPUT TV AUDIO Blu-ray AUX1 TUNER AVR GAME AUX2 PHONO iPod/ USB CD NETWORK INTERNET RADIO FAVORITE STATION 1 2 3 4 InstaPrevue CH/PAGE uio p ENTER BACK VOLUME MUTE INFO OPTION ENTER SETUP BACK TUNE TUNE Tips SETUP 1 Press MAIN to switch the zone mode. 2 Press SETUP. 3 Use uio p to select the menu to be set or operated, then press ENTER.
Contents Connections Playback Settings Tips Appendix Inputting characters • On this unit, you can change the name displayed on the following screens to the names that you prefer.
Contents Connections Playback Settings Using the keyboard screen 1 Using the number buttons Display the screen for inputting characters. GExampleH Source Rename screen Inputs/Source Rename CBL/SAT Insert I J K L M ! “ S T U V W X Y ( ) * + 0 1 2 3 4 5 6 7 8 9 a/A When the keyboard screen is displayed, press 0 – 9. 2 Place the cursor at the character to be changed with o p and press the number button (0 – 9) until the desired character is displayed.
Contents Connections Playback Settings Tips Appendix Audio Make audio-related settings. Dialog Level Subwoofer Level Sets the output level to clarify the dialogue output from the center channel. This setting adjusts the volume level for the subwoofer. 22Level 22Subwoofer Turn subwoofer output on and off. On (Default) : The subwoofer is used. Off : The subwoofer is not used. –12.0dB – +12.0dB (Default : 0.
Contents Connections Playback Settings Tips 22Loudness Management Surround Parameter This sets whether to output as specified in “Dynamic Compression” or output directly without compressing the dynamic range of audio recorded in the disc. On (Default) : Outputs using the settings made in “Dynamic Compression” and “Dialogue normalization function” (vpage 197) are enabled. Off : “Dynamic Compression” settings and “Dialogue Normalization” are disabled, and the signals on the disk are output as is.
Contents Connections Playback Settings 22Low Frequency Effects Assign front L/R signals to also go to the surround channels for wider sound. On : Set. Off (Default) : Do not set. % • For proper playback of the different sources, we recommend setting to the values below. • Dolby Digital sources : 0dB • DTS movie sources : 0dB • DTS music sources : –10dB % • You can set this when the sound mode is Dolby PLg/gx in the “Music” mode.
Contents Connections Playback Settings 22Center Width Tips 22Room Size Distributes the dialogue output from the center channel to left and right channels and widens the sound image in the front. 0 – 7 (Default : 3) Determine size of acoustic environment. You can set this when the sound mode is one of the original sound modes. Small : Simulate acoustics of a small room. Medium small : Simulate acoustics of a medium-small room. Medium (Default) : Simulate acoustics of a medium room.
Contents Connections Playback Settings 22Speaker Select Adjust the tonal quality of the sound. 22Tone Control Set the tone control function to “On” and “Off”. On : Allow tone adjustment (bass, treble). Off : Playback without tone adjustment. 22Bass Adjust bass. –6dB – +6dB % 22Treble • This can be set when “Assign Mode” (vpage 181) is set to “7.1ch (SB/FH/ FW)” or “9.1ch (SB/FH/FW)”.
Contents Connections Playback Settings Restorer Appendix Audio Delay Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear. The “Restorer” function generates the signals eliminated upon compression, restoring the sound to conditions near those of the original sound before compression. It also restores the original bass characteristics for a rich and expanded tonal range.
Contents Connections Playback Settings 22Limit Tips Appendix Audyssey Make a setting for maximum volume. 60 (–20dB) / 70 (–10dB) / 80 (0dB) Off (Default) Set Audyssey MultEQ® XT32, Audyssey Dynamic EQ®, Audyssey Dynamic Volume®, Audyssey LFC™ and Audyssey DSX®. These can be selected after Audyssey® Setup has been performed. For additional information on Audyssey technology, please see page 241. 22Power On Level % Define the volume setting that is active when the power is turned on.
Contents Connections Playback Settings 22Dynamic EQ Tips Appendix 22Reference Level Offset Solves the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. Works with MultEQ® XT32. On (Default) : Use Dynamic EQ. Off : D o not use Dynamic EQ. Audyssey Dynamic EQ® is referenced to the standard film mix level. It makes adjustments to maintain the reference response and surround envelopment when the volume is turned down from 0 dB.
Contents Connections Playback Settings 22Dynamic Volume Tips About Audyssey LFC™ (Low Frequency Containment) Audyssey LFC™ solves the problem of low frequency sounds disturbing people in neighboring rooms or apartments. Audyssey LFC™ dynamically monitors the audio content and removes the low frequencies that pass through walls, floors and ceilings. It then applies psychoacoustic processing to restore the perception of low bass for listeners in the room.
Contents Connections Playback Settings 22Audyssey DSX® % • “Audyssey DSX®” can be set when you are using front height speakers or front wide speakers. • “Wides/Heights” can only be set when the “Assign Mode” (vpage 181) setting is other than “9.1ch (SB/FH/FW)” and the “Main pre-amps” (vpage 182) setting is other than “Surround Back”. • “Audyssey DSX®” is only valid when using a center speaker.
Contents Connections Playback Settings Tips 22Curve Copy Graphic EQ Copy “Audyssey Flat” curve from “MultEQ® XT32” (vpage 156). Use the 9 band graphic equalizer to adjust the tone of each speaker. % % • “Curve Copy” is displayed after Audyssey® Setup has been performed. • “Graphic EQ” can be set when “MultEQ® XT32” (vpage 156) setting is “Graphic EQ”. • Speakers for which “Graphic EQ” can be set differ according to the sound mode.
Contents Connections Playback Settings Tips Appendix Video Make video-related settings. Picture Adjust % • You can also press OPTION to make these settings from “Picture Mode” (vpage 110) in the option menu. • The default settings are as follows. • For “NETWORK” and “iPod/USB” input sources : Streaming • For input sources other than “Network” and “iPod/USB” : Off Picture quality can be adjusted. % • Can be set when the “Video Conversion” (vpage 165) setting is “On”.
Contents Connections Playback Settings 22Noise Reduction Tips Appendix HDMI Setup Reduce overall video noise. Low / Medium / High / Off (Default) Make settings for HDMI video/audio output. NOTE 22Enhancer • When “HDMI Pass Through” and “HDMI Control” is set to “On”, it consumes more standby power. If you are not using this unit for an extended period, it is recommended that you unplug the power cord from the power outlet. Emphasize picture sharpness.
Contents Connections Playback Settings 22Video Output Tips Appendix 22HDMI Pass Through Selects which HDMI outputs to use. Auto(Dual) (Default) : The presence of a TV connected to the HDMI MONITOR 1 or HDMI MONITOR 2 connector is detected automatically, and that TV connection is used. Monitor 1 : A TV connected to the HDMI MONITOR 1 connector is always used. Monitor 2 : A TV connected to the HDMI MONITOR 2 connector is always used.
Contents Connections Playback Settings 22Pass Through Source The AV receiver will “pass through” the sources HDMI signal when in standby. Last : Choose this option to “pass through” the last used HDMI input video source. CBL/SAT (Default) / DVD / Blu-ray / GAME / AUX1 / AUX2 / MEDIA PLAYER / CDz : Choose one of these HDMI sources to be passed through when the AV receiver is in standby. Tips Component Video Out Set the zone to which the component video output connector is assigned.
Contents Connections Playback Settings Tips 22i/p Scaler Output Settings Convert the input source resolution to the resolution set. Makes screen-related settings. nn When the input source is set other than to “iPod/USB” and “NETWORK” Analog (Default) : Use i/p (interlace-to-progressive) scaler function for analog video signals. HDMI : Use i/p scaler function for HDMI video signals. Off : Do not use i/p scaler function.
Contents Connections Playback Settings 22Resolution Tips Appendix 22Progressive Mode Set the output resolution. You can set “Resolution” separately for HDMI output of the analog video input and HDMI input. Auto (Default) : The number of pixels the TV connected to the HDMI MONITOR OUT connector supports is detected automatically and the appropriate output resolution is set. 480p/576p / 1080i / 720p / 1080p / 1080p:24Hz / 4K : Set the output resolution.
Contents Connections Playback Settings On Screen Display Tips Appendix TV Format Select the on-screen display user interface preferences. Set the video signal format to be output for the TV you are using. 22Volume 22Format Sets where to display the master volume level. Bottom (Default) : D isplay at the bottom. Top : Display at the top. Off : T urn display off. NTSC (Default) : Select NTSC output. PAL : Select PAL output. % • “Format” can also be set by the following procedure.
Contents Connections Playback Settings Appendix Tips Inputs Perform settings related to input source playback. You do not have to change the settings to use the unit. Make settings when needed. Input Assign % • By default, each item is set as follows. By making connections as indicated by the input sources printed on the audio/video input connectors of this unit, you can just press one of the input source select buttons to easily play back audio or video from a connected device.
Contents Connections Playback Settings 22HDMI Tips 22COMP (Component video) Set this to change the HDMI input connectors assigned to the input sources. 1 / 2 / 3 / 4 / 5 / 6 / FRONT : Assign an HDMI input connector to the selected input source. – : Do not assign an HDMI input connector to the selected input source. Set this to change the component video input connectors assigned to the input sources. 1 / 2 : Assign the component video input connector to the selected input source.
Contents Connections Playback Settings Source Rename Tips Appendix Source Level Change the display name of the selected input source. This is convenient when the input source name of your device and the input source name of this unit are different. You can change the name to suit your needs. When the renaming is completed, the name is displayed on this unit’s display and on the menu screen.
Contents Connections Playback Settings Tips 22Decode Mode Input Select Set the audio decode mode for input source. Auto (Default) : Detect type of digital input signal and decode and play automatically. PCM : Decode and play only PCM input signals. DTS : Decode and play only DTS input signals. Set the audio input mode and decode mode of each input source. The input modes available for selection may vary depending on the input source.
Contents Connections Playback Settings Tips Appendix Speakers The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called “Audyssey® Setup”. You do not have to perform Audyssey® Setup when you have already performed Speaker Calibration in Setup Assistant. To set up the speakers manually, use “Manual Setup” (vpage 181) on the menu. Audyssey® Setup NOTE • Make the room as quiet as possible.
Contents Connections Playback Settings 22About Setup and measurement microphone placement GExample wH FL SW C FL SW C FR ( : Measuring positions) SL *M The main listening position is the position where listeners would normally sit or where one would normally sit alone within the listening environment. Before starting Audyssey® Setup, place the Setup and measurement microphone in the main listening position.
Contents Connections Playback Settings Procedure for speaker settings (Audyssey® Setup) 1 Tips Mount the Setup and measurement microphone on a tripod or stand and place it in the main listening position. When you set the setup microphone, point the tip of it toward the ceiling, at the height of your ears in your listening position. Preparation 2 Measurement If using a subwoofer capable of the following adjustments, set up the subwoofer as shown below.
Contents 3 Connections Playback Settings Connect the Setup and measurement microphone to the SETUP MIC jack of this unit. When the Setup and measurement microphone is connected, the following screen is displayed. Tips 4 Select “Start” and then press ENTER. 5 Select “Next” and then press ENTER. Audyssey® Setup can also make the following settings.
Contents 6 Connections Playback Settings Select “Begin Test” and then press ENTER. • Measurement requires several minutes. NOTE • If “Caution!” is displayed on TV screen: Go to “Error messages” (vpage 179). Check any related items, and perform the necessary procedures. • If the volume level for the subwoofer is not appropriate, an error message is displayed. See “Subwoofer level error message and how to adjust” (vpage 180). Appendix 8 Select “Next” and then press ENTER.
Contents 10 11 Connections Playback Settings 12 Repeat step 9, measuring positions 3 to 8. Tips Appendix Use ui to select the item you want to check, and then press ENTER. Select “Calculation” and then press ENTER. Audyssey Setup Check processing results. To proceed, press “Store”. Audyssey Setup Calibration completed! Now calculating...Please wait. Speaker Config.
Contents 13 Connections Playback Settings 15 Select “Store” and then press ENTER. Save the measurement results. Tips Appendix Set Audyssey Dynamic Volume®. Audyssey Setup Audyssey Setup You can set Dynamic Volume function, which automatically adjust volume level for all content. Check processing results. To proceed, press “Store”. Do you want to enable? Speaker Config.
Contents Connections Playback Settings Tips Appendix Error messages An error message is displayed if Audyssey® Setup could not be completed due to speaker placement, the measurement environment, etc. If an error message is displayed, check the relevant items and perform the necessary measures. Be sure to turn off the power before checking speaker connections. Examples Error details Measures Microphone or Speaker is None • Setup and measurement microphone is not detected.
Contents Connections Playback Settings 22Subwoofer level error message and how to adjust The optimal level of each subwoofer channel for Audyssey Setup measurement is 75 dB. During subwoofer level measurement (vpage 172 “Audyssey® Setup”), an error message is displayed when one level of subwoofers is outside the 72 – 78 dB range. When using a subwoofer with built-in amplifier (active type), adjust the subwoofer volume so that the subwoofer level is within the 72 to 78 dB range.
Contents Connections Playback Settings Manual Setup Amp Assign Select power amplifier usage method to match your speaker system. 22Assign Mode Set the assignment mode. 7.1ch(SB/FH/FW) : Assigns all power amplifiers within this unit for MAIN ZONE. 5.1ch + ZONE2 (Default) : Setting to assign the unit’s built-in power amplifier for ZONE2 and output the audio in stereo. 5.1ch + ZONE3 : Setting to assign the unit’s built-in power amplifier for ZONE3 and output the audio in stereo. 5.
Contents Connections Playback Settings 22Main Pre-amps Tips Appendix Speaker Config. Selects the PRE OUT connector that is connected to the external power amplifier used in MAIN ZONE when “Assign Mode” (vpage 181) is set to “9.1ch(SB/FH/FW)”. Surround Back (Default) : The surround back left and right pre-amp outputs are connected to an external amplifier. Front Height : The front height left and right pre-amp outputs are connected to an external amplifier.
Contents Connections Playback Settings 22Subwoofer Tips 22Surr. Back Set the presence of a subwoofer. 2spkrs : U se two subwoofers. 1spkr (Default) : U se only one subwoofer. None : Select when a subwoofer is not connected. Set the presence, size and number of surround back speakers. Large : Use a large speaker that can adequately play back very low bass frequencies. Small (Default) : Use a small speaker that has inadequate playback capacity for very low bass frequencies.
Contents Connections Playback Settings 22Front Height Set distance from listening position to speakers. Measure beforehand the distance from the listening position to each speaker. 22Unit Set the unit of distance. Feet (Default) Meters % • When “Assign Mode” (vpage 181) setting is “7.1ch (SB/FH/FW)” or “9.1ch (SB/FH/FW)”, you can make the “Front Height” setting. 22Step Set the minimum variable width of the distance. 1ft (Default) / 0.1ft 0.1m / 0.
Contents Connections Playback Settings Levels Tips Crossovers Set the volume of the test tone to be the same when it is output from each speaker. Set the maximum frequency of the bass signal output from each channel to the subwoofer. Set the Crossover Frequency to suit the bass reproduction capability of the speaker being used. 22Test Tone Start 22Speaker Selection Output test tone. A test tone is output from the selected speaker.
Contents Connections Playback Settings 22Set the crossover frequency Tips Appendix Bass 40Hz / 60Hz / 80Hz (Default) / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz Set subwoofer and LFE signal range playback. 22Subwoofer Mode % Select low range signals to be reproduced by subwoofer. LFE (Default) : The low range signal of the channel set to “Small” speaker size is added to the LFE signal output from the subwoofer.
Contents Connections Playback Settings Front Speaker Setup Tips Appendix 2ch Playback Set the front speakers to use for every sound mode. Select the method for setting the speakers used in the 2-channel direct and stereo playback modes. % % • This can be set when “Assign Mode” (vpage 181) is set to “5.1ch + Front B” and “7.1ch/2ch Front”. • This can be set when “Assign Mode” (vpage 181) is set to “7.1ch/2ch Front”.
Contents Connections Playback Settings 22Subwoofer Set the maximum frequency of the bass signal output from each channel to the subwoofer. 40Hz / 60Hz / 80Hz (Default) / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz % % • If “Speaker Config.” – “Subwoofer” (vpage 183) is set to “None”, the setting is automatically set to “No”. If the “Front” setting is “Small”, the setting is automatically “Yes”. • This setting can be set made “2ch Playback” – “Subwoofer” is set to “Yes”.
Contents Connections Playback Settings Tips Appendix Network To use this unit by connecting it to a home network (LAN), you must configure network settings. If you set up your home network (LAN) via DHCP, set “DHCP” to “On” (use the default setting). This allows this unit to use your home network (LAN).
Contents Connections Playback Settings Tips 22IP Address Settings Set the IP address within the ranges shown below. • The Network Audio function cannot be used if other IP addresses are set. CLASS A: 10.0.0.1 – 10.255.255.254 CLASS B: 172.16.0.1 – 172.31.255.254 CLASS C: 192.168.0.1 – 192.168.255.254 Make settings for wired LAN.
Contents Connections Playback Settings 22Proxy Used to check the network connection. 22Physical Connection Checks the physical LAN port connection. OK Error : The LAN cable is not connected. Check the connection. 22Router Access Checks the connection from this unit to the router. OK Error : Failed to communicate with the router. Check the router settings. 22Port Enter port number. % • If you cannot connect to the Internet, recheck the connections and settings (vpage 50).
Contents Connections Playback Settings Tips Maintenance Mode Use when receiving maintenance from a Denon service engineer or custom installer. Ordinarily, this mode isn’t suitable for use by the end user, only by a trained service technician or custom installation professional. NOTE • Only use this function if so instructed by a Denon serviceperson or installer.
Contents Connections Playback Settings Tips Appendix General Make various other settings. Language ZONE2 Setup / ZONE3 Setup Set the language for display on the menu screen. English (Default) / Français / Español Set the audio to play back with multi-zone (ZONE2, ZONE3). % • The setting values (dB) for “Volume Limit” and “Power On Volume” are what is displayed when “Scale” (vpage 155) in the menu is set to “–79.5dB – 18.0dB”. % • “Language” can also be set by the following procedure.
Contents Connections Playback Settings 22Lch Level Set the volume output level. Variable (Default) : Volume adjustment is enabled by main unit and remote control unit. 1 – 98 (–79dB – 18dB) : The volume is adjusted to the set level. 22Rch Level Adjust the right channel output level. –12dB – +12dB (Default : 0dB) 22Volume Limit Make a setting for maximum volume. 60 (–20dB) / 70 (–10dB) / 80 (0dB) (Default : 70 (–10dB)) Off : Do not set a maximum volume.
Contents Connections Playback Settings 22Mute Level Tips Appendix Quick Select Names Set the amount of attenuation when muting is on. Full (Default) : T he sound is muted entirely. –40dB : The sound is attenuated by 40 dB down. –20dB : The sound is attenuated by 20 dB down. Change the “Quick Select” display title to one you prefer. Quick Select 1 / Quick Select 2 / Quick Select 3 / Quick Select 4 Set Defaults : The input source name is returned to the default setting.
Contents Connections Playback Settings Tips 22Channel Indicators Auto Standby Sets whether to use the input signal display or output signal display for the channel indication on the display. Input : Uses the input signal display for the channel indication on the display. Output (Default) : Uses the output signal display for the channel indication on the display.
Contents Connections Playback Settings Tips Appendix 22Video Information Show information about receiver settings, input signals, etc. Show the HDMI input/output signals and HDMI monitor information for MAIN ZONE. 22Audio HDMI Signal Info. Resolution / Color Space / Pixel Depth Show the audio information for MAIN ZONE. Sound Mode : T he currently set sound mode. Input Signal : T he input signal type. Format : The number of input signal channels (presence of front, surround, LFE).
Contents Connections Playback Settings 22Notifications Tips Usage Data Selects notification message preferences. To help us improve our products and customer service, Denon collects anonymous information about how you use your AV receiver (such as frequently used input sources and sound modes and speaker settings). Denon will never provide any information we collect to third parties. Yes (Default) : Provide Denon with information about how you use this unit via the network.
Contents Connections Playback Settings Tips 22Notifications Firmware When the latest firmware is available, a notification message is displayed on the TV screen at power on. Set whether or not to check for firmware update, update the firmware, and display update and upgrade notifications. Update 22Update On (Default) : Display update message. Off : Do not display update message. Update the firmware of the receiver. Check for Update : Check for firmware updates.
Contents Connections Playback Settings 22Add New Feature • In order to use these functions, you must have the correct system requirements and settings for a broadband Internet connection (vpage 50). • Do not turn off the power until updating or upgrading is completed. • Even with a broadband connection to the Internet, approximately 1 hour is required for the updating/upgrading procedure to be completed.
Contents Connections Playback Settings Tips Setup Lock Protect settings from inadvertent changes. 22Lock On : Turn protection on. Off (Default) : T urn protection off. % • When cancelling the setting, set “Lock” to “Off”. NOTE • When “Lock” is set to “On”, no setting items are displayed except for “Setup Lock”.
Contents Connections Playback Settings Tips Appendix Operating external devices with the remote control unit ZONE SELECT 2 Operation mode indicators 3 MAIN DEV.
Contents Connections Playback Settings nn Registering multiple players at the same time Registering preset codes 1 There are two methods for registering preset codes; the simple method for registering preset codes of Denon players, and the method for registering the preset numbers of other manufacturers’ devices.
Contents Connections Playback Settings Tips 22Registering by entering preset numbers Before starting, confirm the preset number of the device that you want to register and the buttons that can be registered in the Preset Code Table (vpage 263) in the Appendix. 1 Press and hold down the input source button that you want to register the preset code to and SETUP until the DEV, TV and AVR indicators are flashing green.
Contents Connections Playback Settings Appendix Tips nn CBL/SAT group (Set top box for satellite (SAT) / cable (CBL) / Media player / IP TV) operation Operating devices To operate an external device, press the input source button registered with the preset code, followed by one of the buttons in the following tables. Operation buttons DEVICE X DEVICE MENU CH/PAGE df INFO OPTION % • The “DEV.” indicator lights when an external device is being operated.
Contents Connections Playback Settings nn TV group (TV) operation Appendix Tips nn VCR/DVR group (DVD recorder (DVR) / Personal video recorder (PVR) / video cassette recorder (VCR)) operation Operation buttons TV X TV INPUT TV MENU CH/PAGE df INFO OPTION uio p ENTER (Cursor) BACK SETUP 8 9 1 6 7 3 2 0 – 9, +10 ENTER (Number) Operation buttons DEVICE X DEVICE MENU CH/PAGE df INFO OPTION Function TV power on/off Switch TV input TV menu Switch channels (up/down) Information Sub menu, Option Cursor op
Contents Connections Playback Settings nn BD/DVD group (Blu-ray Disc player / HD-DVD player / DVD player) operation Operation buttons DEVICE X DEVICE MENU CH/PAGE df INFO OPTION uio p ENTER BACK SETUP 8 9 1 6 7 3 2 0 – 9, +10 Appendix Tips nn Audio group (CD player / CD recorder) operation Operation buttons DEVICE X INFO Function Power on/off (Popup) Menu Switch channels (up/down) Information Top menu Cursor operation Enter Back Setup Previous / Next Playback Fast-reverse / Fast-forward Pause Stop S
Contents Connections Playback Settings Initializing registered preset codes 1 Tips Appendix Specifying the zone used with the remote control unit Press and hold down AVR and OPTION until the DEV, TV and AVR indicators on the remote are flashing green, then release. To prevent accidental misuse, you can set the zone for which the remote control unit is used. 1 Press and hold down MAIN or ZONE2 or ZONE3 and SETUP until the DEV, TV and AVR indicators on the remote are flashing green, then release.
Contents Connections Playback Settings Tips Appendix Tips Contents 22Tips...................................................................(210) 22Troubleshooting.............................................(212) I want the volume not to become too loud by mistake...................(210) Power does not turn on/Power is turned off...................................(212) I want to keep the volume at the same level when I turn the power on.............................................................
Contents Connections Playback Settings Tips Appendix Tips I want the volume not to become too loud by mistake. • Set the volume upper limit for “Volume Limit” in the menu beforehand. This prevents children or others from increasing the volume too much by mistake. You can set this for each zone (vpage 156, 194). I want to keep the volume at the same level when I turn the power on. • By default, the volume setting when power was previously set to standby is applied at next power on.
Contents Connections Playback Settings Tips Appendix I want to combine a desired video with the current music. • Set “Video Select” in the option menu to “On”. You can combine the current music with your desired video source from Set-top Box or DVD, etc. while listening to music from Tuner, CD, PHONO or the Internet radio (vpage 109). I want to play back photos from Flickr at the same time while listening to the Internet radio.
Contents Connections Playback Settings Tips Appendix Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase.
Contents Connections Playback Settings Tips Appendix 22Operations cannot be performed through the remote control unit Symptom Operations cannot be performed through the remote control unit. Cause/Solution Page • Batteries are worn out. Replace with new batteries. • Operate the remote control unit within a distance of about 23 ft/7 m from this unit and at an angle of within 30°. • Remove any obstacle between this unit and the remote control unit.
Contents Connections Playback Settings Tips Appendix 22No sound comes out Symptom Cause/Solution Page 28, 37, 38, 41, 42, 44, 46, 48, 50 – • Insert connection cables all the way in. – • Check that input connectors and output connectors are not reversely connected. – • Check cables for damage. 28 • Check that speaker cables are properly connected. Check that cable core wires come in contact with the metal part on speaker terminals. Also, securely tighten speaker terminals.
Contents Connections Playback Settings Tips Appendix 22Desired sound does not come out Cause/Solution Page The volume does not increase. Symptom • The maximum volume is set too low. Set the maximum volume using “Limit”on the menu. • Appropriate volume correction processing is performed according to the input audio format and settings, so the volume may not reach the upper limit. 156, 194 – No sound comes out with the HDMI connection. • Check the connection of the HDMI connectors.
Contents Connections Playback Settings Symptom Tips Appendix Cause/Solution Page DTS sound is not output. • Check that the digital audio output setting on the connected device is set to “DTS”. • Set “Decode Mode” on the menu to “Auto” or “DTS”. Dolby TrueHD, DTS-HD, Dolby Digital Plus audio is not output. • Make HDMI connections. • Check the digital audio output setting on the connected device. On some devices, “PCM” is set by default.
Contents Connections Playback Settings Tips Appendix 22Sound is interrupted or noise occurs Cause/Solution Page During playback from the Internet radio or USB memory device, sound is occasionally interrupted. Symptom • When the transfer speed of the USB memory device is slow, sound may occasionally be interrupted. • The network communication speed is slow or the radio station is busy. – When making a call on iPhone, noise occurs in audio output on this unit.
Contents Connections Playback Settings Tips Appendix 22No video is shown on the TV Symptom Cause/Solution Page 37, 38, 41, 42, 44, 46, 48, 50 – • Insert connection cables all the way in. – • Check that input connectors and output connectors are not reversely connected. – • Check cables for damage. 168 • Match the input settings to the input connector of the TV connected to this unit. 55, 138 • Check that the proper input source is selected. 168 • Check the video input connector setting.
Contents Connections Playback Settings Tips Appendix 22The menu screen is not displayed on the TV Symptom Cause/Solution Page The menu screen or operation details are not displayed. • The menu screen is only displayed on this unit and a TV connected by HDMI cable. If this unit is connected to a TV using a different video output connector, operate while watching the display on this unit. – The menu screen is not displayed on the TV.
Contents Connections Playback Settings Tips Appendix 22iPod cannot be played back Symptom Cause/Solution Page • When using iPod by connecting it to the USB port, some iPod variations are not supported. • When iPod is connected by using a USB cable other than the genuine cable, iPod may not be recognized. Use a genuine USB cable. 47 – • This unit and PC / iPhone / iPod touch / iPad are not connected to the same network (LAN).
Contents Connections Playback Settings Tips Appendix 22USB memory devices cannot be played back Symptom Cause/Solution Page • The set cannot recognize a USB memory device. Disconnect and reconnect the USB memory device. • USB memory devices of a mass storage class or those compatible with MTP are supported. • This unit does not support a connection through a USB hub. Connect the USB memory device directly to the USB port. • The USB memory device must be formatted to FAT16 or FAT32.
Contents Connections Playback Settings Tips Appendix 22File names on the iPod/USB memory device are not displayed properly Symptom The file names are not displayed properly (“...”, etc.). Cause/Solution Page • Characters that cannot be displayed are used. This is not a malfunction. On this unit, characters that cannot be displayed are replaced with a “.” (period). – 22The Internet radio cannot be played back Symptom Cause/Solution Page A list of broadcasting stations is not displayed.
Contents Connections Playback Settings Tips Appendix 22Music files on PC or NAS cannot be played back Symptom Cause/Solution Page Files stored on a computer cannot be played. • Files are stored in a non-compatible format. Record in a compatible format. • You are attempting to play a file that is copyright protected. Files that are copyright protected cannot be played on this unit. • Set and computer are connected by USB cable. The set’s USB port cannot be used for connection to a computer.
Contents Connections Playback Settings Tips Appendix 22The HDMI control function does not work Symptom The HDMI control function does not work. Cause/Solution Page • Check that “HDMI Control” in the menu is set to “On”. • You cannot operate devices that are not compatible with the HDMI control function. In addition, depending on the connected device or the settings, the HDMI control function may not work. In this case, operate the external device directly.
Contents Connections Playback Settings Tips Appendix Resetting factory settings Perform this procedure if the display is abnormal or if operations cannot be performed. Note that when the microprocessor is reset, all the settings are reset to their default values and setup will need to be performed again. X 1 2 3 INFO Turn off the power using X. Press X while simultaneously pressing INFO and BACK. Once the display starts flashing at intervals of about 1 second, release the two buttons.
Contents Connections Playback Settings Tips Appendix Appendix About HDMI • 3D This unit supports input and output of 3D (3 dimensional) video signals of HDMI. To play back 3D video, you need a TV and player that provide support for the HDMI 3D function and a pair of 3D glasses. • 4K This unit supports input and output of 4K Ultra HD (3840 x 2160 pixels) video signals of HDMI. • Content Type It automatically makes settings suitable for the video output type (content information).
Contents Connections Playback Settings • HDMI control If you connect the unit and an HDMI control function compatible TV or player with an HDMI cable and then enable the HDMI control function setting on each device, the devices will be able to control each other. • Power off link This unit power off can be linked to the TV power off step. • Audio output destination switching From the TV, you can switch whether to output audio from the TV or the AV amplifier.
Contents Connections Playback Settings 22Supported audio formats 2-channel Linear PCM Multi-channel Linear PCM Bitstream DSD In order to play back digital video and audio such as BD-Video (Blu-ray Disc) or DVD-Video via HDMI connection, both this unit and TV and the player need to support the copyright protection system known as HDCP (High-bandwidth Digital Content Protection System). HDCP is copyright protection technology comprised of data encryption and authentication of the connected AV devices.
Contents Connections Playback Settings Appendix Tips Video conversion function This unit automatically converts the input video signals as shown in the diagram below before outputting them to the TV.
Contents Connections Playback Settings Appendix Tips This unit can convert the input video signals to the resolution that is set for “Resolution” (vpage 166) in the menu before outputting them to the TV.
Contents Connections Playback Settings Playing back USB memory devices Tips Appendix • This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. • This unit can show the artwork that was embedded by using MP3 ID3Tag Ver. 2.3 or 2.4. • This unit is compatible with WMA META tags. • If the image size (pixels) of an album artwork exceeds 500 × 500 (WMA/ MP3/WAV/FLAC) or 349 × 349 (MPEG-4 AAC), then music may not be played back properly.
Contents Connections Playback Settings Playing back files stored on PC or NAS Appendix Tips 22Specifications of supported files • This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. • This unit can show the artwork that was embedded by using MP3 ID3Tag Ver. 2.3 or 2.4. • This unit is compatible with WMA META tags. • If the image size (pixels) of an album artwork exceeds 500 × 500 (WMA/ MP3/WAV/FLAC) or 349 × 349 (MPEG-4 AAC), then music may not be played back properly.
Contents Connections Playback Settings Tips Appendix Playing back Internet Radio Personal memory plus function 22Playable broadcast station specifications This function sets the settings (input mode, sound mode, HDMI output mode, MultEQ® XT32, Dynamic EQ, audio delay etc.) last selected for the individual input sources. WMA (Windows Media Audio) MP3 (MPEG-1 Audio Layer-3) MPEG-4 AAC Front panel Sampling frequency Bit rate Extension 32/44.1/48 kHz 48 – 192 kbps .wma 32/44.
Contents Connections Playback Settings Appendix Tips Sound modes and channel output S This indicates the audio output channels or surround parameters that can be set. D This indicates the audio output channels. The output channels depend on the settings of “Speaker Config.” (vpage 182).
Contents Connections Playback Settings Appendix Tips Sound modes and surround parameters Surround Parameter (vpage 151) Sound mode (vpage 112) DIRECT/PURE DIRECT (2-channel)z1 DIRECT/PURE DIRECT (Multichannel)z1 DSD DIRECT (2-channel)z1 DSD DIRECT (Multi-channel)z1 STEREO MULTI CH IN DOLBY PRO LOGIC gz DOLBY PRO LOGIC gx DOLBY PRO LOGIC g DOLBY PRO LOGIC g A-DSX DOLBY PRO LOGIC gx A-DSX DTS NEO:X Audyssey DSX® DOLBY DIGITAL DOLBY DIGITAL Plus DOLBY TrueHD DTS SURROUND DTS 96/24 DTS-HD DTS Express MUL
Contents Connections Playback Settings Appendix Tips Surround Parameter (vpage 151) PRO LOGIC g/gx Music mode only Sound mode (vpage 112) NEO:X mode only Panorama Dimension Center Width Center Gain (vpage 152) (vpage 152) (vpage 153) (vpage 152) DIRECT/PURE DIRECT (2-channel)z1 DIRECT/PURE DIRECT (Multi-channel)z1 DSD DIRECT (2-channel)z1 DSD DIRECT (Multi-channel)z1 STEREO MULTI CH IN DOLBY PRO LOGIC gz DOLBY PRO LOGIC gx DOLBY PRO LOGIC g DOLBY PRO LOGIC g A-DSX DOLBY PRO LOGIC gx A-DSX DTS NEO:X
Contents Connections Playback Settings Tips z1 During playback in PURE DIRECT mode, the surround parameters are the same as in DIRECT mode. z2 Audio is output when “Subwoofer Mode” (vpage 186) in the menu is set to “LFE+Main”. z3 This setting is unavailable when the set sound mode name contains “+PLg Music” or “+NEO:X Music”. z4 This setting is possible when the sound mode is “Cinema” mode. z5 This item can be selected when a Dolby TrueHD signal is played.
Contents Connections Playback Settings Appendix Tips Types of input signals, and corresponding sound modes F This indicates the default sound mode. S This indicates the selectable sound mode. 2-channel signal Sound mode (vpage 112) NOTE Analog / PCM Dolby Digital (+/HD) / DTS (-HD) Multi-channel signal DSD (Super Audio CD) PCM Multi DTS-HD DTS Express DTS ES DSCRT 6.1 DTS ES MTRIX 6.
Contents Connections Playback Settings 2-channel signal Sound mode (vpage 112) NOTE Analog / PCM Dolby Digital (+/HD) / DTS (-HD) Appendix Tips Multi-channel signal DSD (Super Audio CD) PCM Multi DTS-HD DTS Express DTS ES DSCRT 6.1 DTS ES MTRIX 6.1 DTS DOLBY TrueHD DOLBY DOLBY DOLBY DIGITAL DIGITAL DIGITAL Plus EX DSD (Super Audio CD) MULTI CH IN MULTI CH IN MULTI CH IN + DOLBY EX MULTI CH IN + PLgx MULTI CH IN + PLgz MULTI CH IN + NEO:X MULTI CH IN 7.
Contents Connections Playback Settings Tips Appendix z1 This item can be selected when surround back speakers are used. z2 The Cinema mode or Music mode can be selected. When using a single surround back speaker, the Music mode is used. z3 This item can be selected when front height speakers are used. z4 The Cinema mode, Music mode or Game mode can be selected. This item can be selected when using any of the Surround back, Front height or Front wide speaker.
Contents Connections Playback Settings Explanation of terms Display Rear panel Appendix Audyssey Dynamic Surround Expansion (A-DSX) Audyssey DSX® is a scalable system that adds new speakers to improve surround sound vividness. Starting with a 5.1 system Audyssey DSX® first adds Wide channels for the biggest impact on envelopment.
Contents Connections Playback Settings Display Rear panel Appendix Dolby Digital Plus Dolby Digital Plus is an improved Dolby Digital signal format that is compatible with up to 7.1-channels of discrete digital sound and also improves sound quality thanks to extra data bit rate performance. It is upwardly compatible with conventional Dolby Digital, so it offers greater flexibility in response to the source signal and the conditions of the playback device.
Contents Connections Playback Settings Display Rear panel Appendix Downmix This function converts the number of channels of surround audio to a lower number of channels and plays back according to the system’s configuration. DTS This is an abbreviation of Digital Theater System, which is a digital audio system developed by DTS. DTS delivers a powerful and dynamic surround sound experience, and is found in the world’s finest movie theaters and screening rooms.
Contents Connections Playback Settings DTS Express DTS Express is an audio format supporting low bit rates (max. 5.1-channels, 24 to 256 kbps). DTS-HD This audio technology provides higher sound quality and enhanced functionality than the conventional DTS and is adopted as an optional audio for Blu-ray Disc. This technology supports multi-channel, high data transfer speed, high sampling frequency, and lossless audio playback. Maximum 7.1-channels are supported in Blu-ray Disc.
Contents Connections Playback Settings FLAC FLAC stands for Free lossless Audio Codec, and is a lossless free audio file format. Lossless means that the audio is compressed without any loss in quality. The FLAC license is as shown below.
Contents Connections Playback Settings L LFE This is an abbreviation of Low Frequency Effect, which is an output channel that emphasizes low frequency effect sound. Surround audio is intensified by outputting 20 Hz to 120 Hz deep bass to the system subwoofer(s). Display Rear panel Appendix P Progressive (sequential scanning) This is a scanning system of the video signal that displays 1 frame of video as one image.
Contents Connections Playback Settings Tips Appendix V vTuner This is a free online content server for Internet Radio. Note that usage fees are included in upgrade costs. For inquiries about this service, visit the vTuner site below. vTuner website: http://www.radiodenon.com This product is protected by certain intellectual property rights of Nothing Else Matters Software and BridgeCo.
Contents Connections Playback Settings Tips Appendix Trademark information Manufactured under a license from U.S. Patent No’s: 5,956,674; 5,974,380; 5,978,762; 6,487,535; 6,226,616; 7,212,872; 7,272,567; 7,668,723; 7,392,195; 7,930,184; 7,333,929; 7,548,853; 7,003,467 and 7,283,634. DTS, the Symbol, and DTS and the Symbol together are registered trademarks & DTS Neo:X | 9.1 is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights Reserved. Manufactured under license from Audyssey Laboratories™. U.S.
Contents Connections Playback Settings “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, or iPhone, may affect wireless performance.
Contents Connections Playback Settings Tips Specifications 22Audio section • Power amplifier Rated output: Dynamic power: Output connectors: • Analog Input sensitivity/Input impedance: Frequency response: S/N: Distortion: Rated output: Front panel Display Front: 125 W + 125 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.) 165 W + 165 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Center: 125 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.05 % T.H.D.) 165 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.
Contents Connections Playback Settings Tips • Digital D/A output: Rated output — 2 V (at 0 dB playback) Total harmonic distortion — 0.008 % (1 kHz, at 0 dB) S/N ratio — 102 dB Dynamic range — 100 dB Digital input: Format — Digital audio interface • Phono equalizer (PHONO input — MEDIA PLAYER OUT) Input sensitivity: 2.5 mV RIAA deviation: ±1 dB (20 Hz to 20 kHz) S/N: 74 dB (A weighting, with 5 mV input) Rated output: 150 mV Distortion factor: 0.
Contents Connections Playback 22Tuner section (ANTENNA input – MEDIA PLAYER OUT) Settings [FM] (Note: μV at 75 Ω/ohms, 0 dBf = 1 x 10–15 W) 87.5 MHz – 107.9 MHz 1.5 μV (14.8 dBf) MONO 78 dB STEREO 68 dB HD 85 dB MONO 0.1 % STEREO 0.2 % HD 0.02 % Receiving Range: Usable Sensitivity: S/N (IHF–A weighted): Distortion (1 kHz): Tips [AM] 530 kHz – 1710 kHz 20 μV 85 dB 0.
Contents Connections Index Settings vv C vv Numerics 3D········································································· 226 4K·········································································· 226 vv A Accessories······························································· 7 Add New Feature·················································· 200 Adjusting the master volume·································· 56 AirPlay··························································· 101, 241
Contents Connections vv F Settings vv L Firmware update··················································· 199 FLAC····································································· 245 Flickr········································································ 81 FM indoor antenna·················································· 48 Front height speaker········································· 26, 31 Front panel······························································ 12 Front wide speaker·
Contents Connections vv R Settings Tips vv T Random··························································· 60, 105 Rear panel······························································· 18 Remote control unit················································ 21 Inserting the batteries············································ 8 Repeat····························································· 60, 105 Resetting the microprocessor······························· 225 vv S Sampling frequency·····
Contents Connections Playback Settings License nn Expat This section describes software license used for this unit. To maintain the correct content, the original (English) is used. Expat License. Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd nn Boost http://www.boost.org/ Boost Software License - Version 1.
Contents Connections g. “Standard Version” refers to such a Work if it has not been modified, or has been modified in accordance with the consent of the Author, such consent being in the full discretion of the Author. h. “Work” refers to the collection of files distributed by the Publisher, including the Source Code, Executable Files, binaries, data files, documentation, whitepapers and the Articles. i.
Contents Connections 6. Representations, Warranties and Disclaimer. THIS WORK IS PROVIDED “AS IS”, “WHERE IS” AND “AS AVAILABLE”, WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS OR GUARANTEES. YOU, THE USER, ASSUME ALL RISK IN ITS USE, INCLUDING COPYRIGHT INFRINGEMENT, PATENT INFRINGEMENT, SUITABILITY, ETC.
Contents Connections • Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. • Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
Contents Connections nn Tremor http://wiki.xiph.org/index.php/Tremor Copyright (c) 2002, Xiph.org Foundation Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: • Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Contents Connections Playback Settings Tips Appendix nn zlib nn cURL nn c-ares zlib.h -- interface of the ‘zlib’ general purpose compression library version 1.2.3, July 18th, 2005 COPYRIGHT AND PERMISSION NOTICE Copyright 1998 by the Massachusetts Institute of Technology. http://www.zlib.net/ http://curl.haxx.se Copyright (C) 1995-2004 Jean-loup Gailly and Mark Adler This software is provided ‘as-is’, without any express or implied warranty.
Contents Connections Playback Settings Tips 22License Information for the Software Used in the Unit About GPL (GNU-General Public License), LGPL (GNU Lesser General Public License) License This product uses GPL/LGPL software and software made by other companies. After you purchase this product, you may procure, modify or distribute the source code of the GPL/ LGPL software that is used in the product.
Contents Connections Playback Settings Appendix Tips List of preset codes AVR D Denon 73347 To unregister the device from a button and reset to the default setting, set the AVR code “73347” to the button.
Contents Connections Playback Settings Appendix Tips CBL/SAT group Registrable input source button : S T V W Samsung Scientific Atlanta Shaw Suddenlink Time Warner Videotron VTR WideOpenWest SAT 01877 01877 01376 01376, 01877 01376, 01877 01877 01376 01877 A B IP TV A C M P S T V AT&T Cisco Motorola Philips Samsung Scientific Atlanta Thomson Verizon 00858 00858, 02378 01376, 00858, 02378 02174 02174 00858 02174 02378 D MEDIA PLAYER A N P R S T W Apple Netgear Philips Roku Sony Tec Weste
Contents Connections Playback Settings Appendix Tips CBL/SAT group Registrable input source button : J K L M N O P S JVC KabelBW Koenig Lava Linsar Lodos Logik Matsui MegaSat Metronic Motorola Multichoice MySky Netsat NPG Onn Optus Orbitech Pace Pacific Panasat Panasonic Philips Proline SAB Samsung SatyCon Schwaiger Front panel 00775 01195, 01915 01631 01631 01284 01284 01284 01284 01631 01631 00856 00879 01356 00099 01631 01284 00879, 01356 01195 00847, 01175, 01356 01284 00879 00847 00856, 00
Contents Connections Playback Settings Tips CBL/SAT group Registrable input source button : P S T V Pace Philips Samsung SKY SkyCable Skyplus Skyworth Smart TechniSat Telestar Thomson Viasat Front panel 01175, 01356 00099 01377, 01175 01175 01631 01175 01631 01631 01195 01195 01175 01195 Display Rear panel 266 Remote Index Appendix
Contents Connections Playback Settings Tips Appendix TV group Registrable input source button : TV A B C D A.R.
Contents Connections Playback Settings Tips Appendix TV group Registrable input source button : N O P Q R Multitec Myryad Neckermann NEI Neufunk New Tech O.K.
Contents Connections Playback Settings Tips TV group Registrable input source button : U V W TV/DVD Combination B C D E F G H L M P S T Black Diamond Blue Sky Bush Centrum Crown Dual Elfunk Emerson Ferguson Goodmans Hitachi LG Logik Luxor Matsui Panasonic Philips Samsung SEG Sharp Sony Sylvania Technica Teletech Thomson Toshiba Front panel 11037 11037 11037 11037 11037 11037 11037 11864 11037 11037 11037 11423 11037 11037 11037 12170 11454, 10556 12051 11037 10818 12778 11864 11037 11037 10625
Contents Connections Playback Settings Tips VCR/PVR group Registrable input source button : VCR D H P T DirecTV Humax Philips TiVo Front panel PVR D H P T 20739 20739 20739 20739 Display DirecTV Humax Philips TiVo Rear panel 20739 20739 20739 20739 270 Remote Index Appendix
Contents Connections Playback Settings Tips Appendix BD/DVD group Registrable input source button : H DVD 3 A B C D E F G 3D LAB Accurian AEG Akai Alba Aristona Bel Canto Design Blue Parade Brandt California Audio Labs Centrum Clatronic Dantax Denon Disney DSE Durabrand Emerson EuroLine Finlux Funai GFM Go Video GoldStar GPX Grundig Front panel 30539 30675 30675 30675 30539 30539 31571 30571 30503 I J K L 30490 30675 30675 30539 30490, 31634, 33698, 32258 30675 30675 30675 30675 30675 30741
Contents Connections Playback Settings Appendix Tips BD/DVD group Registrable input source button : Blu-ray Disc D F I L M O P S T Y Denon Funai Insignia Integra LG Magnavox Marantz Onkyo Panasonic Philips Pioneer Samsung Sharp Sony Sylvania Toshiba Yamaha Front panel DVD-R 33698, 32258 30675 30675 32147 30741 30675 32414 32147 31641, 32523, 32859 32434 30142, 32442 30199 32250, 32479, 33313 31516, 32178, 32180, 33519 30675 32705 32298 Display A D E F G L M P S Accurian Denon Emerson Funai
Contents Connections Playback Settings Tips Audio group Registrable input source button : CD D CD-R Denon Front panel D 42867, 42868 Display Denon Rear panel 42868 273 Remote Index Appendix
Contents Connections Playback Settings Tips 55/64 (22.0) 22Dimensions Appendix 47/64 (18.5) 9 21/64 (236.8) 2 5/32 (54.7) 14 59/64 (379.0) 13 21/64 (338.5) 1 27/32 (47.0) Unit : in. (mm) 2 23/64 (60.0) 22Weight : 27 lbs 2 oz (12.3 kg) Front panel Display 1 27/32 (47.0) Rear panel 6 37/64 (167.0) 1 27/32 (47.0) 13 25/64 (340.0) 274 19/32 (15.0) 5 63/64 (152.0) 17 3/32 (434.
www.denon.com D&M Holdings Inc.
