Protocol Specs

- 23 -
Z2PS COMMAND : "*" parameter uses two ASCII characters. (see page6 J) section)
COMMAND
PARAMETER
function example
Z2PS BAS UP ZONE2 BASS UP/DOWN , direct change to **dB Z2PSBAS UP<CR>
BAS DOWN **:00 to 99 by ASCII , 00=0dB Z2PSBAS DOWN<CR>
BAS ** ---AVR-X4000 can be operated from -10 to +10(40 to 60) Z2PSBAS 50<CR>
BAS ? Return Z2PSBAS Status Z2PSBAS ?<CR>
TRE UP ZONE2 TREBLE UP/DOWN , direct change to **dB Z2PSTRE UP<CR>
TRE DOWN **:00 to 99 by ASCII , 00=0dB Z2PSTRE DOWN<CR>
TRE ** ---AVR- X4000 can be operated from -10 to +10(40 to 60) Z2PSTRE 50<CR>
TRE ? Return Z2PSTRE Status Z2PSTRE ?<CR>
Z2SLP OFF ZONE2 SLEEP TIMER setting Z2SLPOFF<CR>
*** ***:001 to 120 by ASCII , 010=10min Z2SLP120<CR>
? Return Z2SLP Status Z2SLP?<CR>
Z2 FAVORITE1 ZONE2 FAVORITE STATION 1-3 MODE SELECT Z2FAVORITE1<CR>
FAVORITE2 Z2FAVORITE2<CR>
FAVORITE3 Z2FAVORITE3<CR>
FAVORITE4 Z2FAVORITE4<CR>
FAVORITE1 MEMORY ZONE2 FAVORITE STATION 1-3 MODE MEMORY Z2FAVORITE1 MEMORY<CR>
FAVORITE2 MEMORY Z2FAVORITE2 MEMORY<CR>
FAVORITE3 MEMORY Z2FAVORITE3 MEMORY<CR>
FAVORITE4 MEMORY Z2FAVORITE4 MEMORY<CR>
QUICK1 ZONE2 QUICK SELECT 1-5 MODE SELECT Z2QUICK1<CR>
QUICK2 Z2QUICK2<CR>
QUICK3 Z2QUICK3<CR>
QUICK4 Z2QUICK4<CR>
QUICK5 Z2QUICK5<CR>
QUICK1 MEMORY ZONE2 QUICK SELECT 1-5 MODE MEMORY Z2QUICK1 MEMORY<CR>
QUICK2 MEMORY Z2QUICK2 MEMORY<CR>
QUICK3 MEMORY Z2QUICK3 MEMORY<CR>
QUICK4 MEMORY Z2QUICK4 MEMORY<CR>
QUICK5 MEMORY Z2QUICK5 MEMORY<CR>
QUICK ? Return Z2QUICK Status Z2QUICK ?<CR>