Owner's Manual
Table Of Contents
- Owners Manual
- Reset
- Features
- Table of Contents
- Panel Lock Function
- Video Comversion
- Supplied Accessories
- Parts & Controls
- Connections
- Cables Used for Connection
- Speaker Installation / Placement
- Connecting Speakers
- Subwoofer
- About Cable Labels
- Speaker Configuration and Amp Assign Settings
- Bi-Amp Connection
- Multi-Zone Speakers
- TV
- Playback Devices
- USB Device
- Antennas
- Home Network
- Connecting an External Control Device
- Zone 2 / Zone 3 Connections
- Power Cord
- Playback
- Power On
- Selecting the Input Source
- Volume / Mute
- Playing a Blu-ray / DVD Player
- USB Device
- Bluetooth
- FM / AM Radio
- Internet Radio
- Playing Back Files Stored On a PC and NAS
- Getting the HEOS App
- AirPlay
- Spotify Connect
- Convenience Functions
- Adding to HEOS Favorites
- Playing back HEOS Favorites
- Deleting a HEOS Favorites
- Adjusting the Audibility of Dialog and Vocals (Dialog Enhancer)
- Adjusting the Volume of each Channelto Match the Input Source (Channel Level Adjust)
- Adjusting the Tone (Tone)
- Displaying your Desired Video During Audio Playback (Video Select)
- Adjusting the Picture Quality for your Viewing Environment (Picture Mode)
- Playing the Same Music in All Zones (All Zone Stereo)
- Selecting a Sound Mode
- HDMI Control Function
- Smart Menu Function
- Sleep Timer
- Quick Select Plus Function
- Panel Lock Function
- Remote Lock Function
- Web Control Function
- Playback in ZONE 2 / ZONE 3
- Settings
- About HDMI
- Relationship Between Video Signals and Monitor Output
- Personal Memory Plus
- Last Function Memory
- Sound Modes and Channel Output
- Sound Modes and Surround Parameters
- Types of Input Signals and Corresponding Sound Modes
- Glossary
- Tips
- Troubleshooting
- Specs
- Index
- Quick Start Guide
- Microphone Stand Assembly Instructions
- Speaker Wire Labels
- IMAX DTS Firmware Update Information
- Spotify
- Warranty
Operations cannot be performed through the remote control unit
Operations cannot be performed through the remote control unit.
0
Batteries are worn out. Replace with new batteries. (v
p. 9)
0
Operate the remote control unit within a distance of about 23 ft/7 m from this unit and at an angle of within 30°. (v p. 9)
0
Remove any obstacle between this unit and the remote control unit.
0
Insert the batteries in the proper direction, checking the q and w marks. (v p. 9)
0
The set’s remote control sensor is exposed to strong light (direct sunlight, inverter type fluorescent bulb light, etc.). Move the set to a place in which the
remote control sensor will not be exposed to strong light.
0
The operation target zone does not correspond to the zone setting specified on the remote control unit. Press MAIN, Z2 or Z3 to select the zone to
operate. (v
p. 175)
0
The remote control unit operating mode is used to operate other devices. Press MAIN to set the operating mode to AVR. (v p. 266)
0
When using a 3D video device, the remote control unit of this unit may not function due to effects of infrared communications between units (such as TV
and glasses for 3D viewing). In this case, adjust the direction of units with the 3D communications function and their distance to ensure they do not
affect operations from the remote control unit of this unit.
Display on this unit shows nothing
Display is off.
0
Set “Dimmer” on the menu to something other than “Off”. (v p. 254)
0
When the sound mode is set to “Pure Direct”, the display is off. (v
p. 142)
Contents
Connections Playback Settings Tips Appendix
275
Front panel Display Rear panel Remote Index