Owner's Manual
Table Of Contents
- Getting Started
- Owners Manual (Supplied on CD-ROM)
- Reset
- Features
- Table of Contents
- Video Conversion
- Supplied Accessories
- Parts & Controls
- Basic Version
- Advanced Version
- Using the Remote Control
- Surround Modes and Parameters
- Types of Input Signals and Corresponding Surround Modes
- Relationship Between Video Signals and Monitor Output
- Video Signal Resolution Conversion Table
- Glossary
- Troubleshooting
- Specs
- Index
- Scan of CD-ROM
- Warranty
176
Resetting the microprocessor
Perform this procedure if the display is abnormal or if operations cannot be performed.
When the microprocessor is reset, all the settings are reset to their default values.
X
BACK
INFO
1
Turn off the power using X.
2
Press X while simultaneously pressing INFO and BACK.
3
Once the display starts ashing at intervals of about 1 second, release the two
buttons.
If in step 3 the display does not flash at intervals of about 1 second, start over from step 1.
Basic version
Advanced version
InformationsInformations
DVD