Preparations Operations DRA-N5 NETWORK RECEIVER Information Owner’s Manual
n SAFETY PRECAUTIONS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
n CAUTIONS ON INSTALLATION n NOTES ON USE z z z z Wall zz For proper heat dispersal, do not install this unit in a confined space, such as a bookcase or similar enclosure. • More than 0.3 m is recommended. • Do not place any other equipment on this unit. Operations Information • Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack. • Handle the power cord carefully. Hold the plug when unplugging the cord. • Keep the unit free from moisture, water, and dust.
Preparations Getting started Thank you for purchasing this DENON product. To ensure proper operation, please read these owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference.
Main features Supports internet radio and music streaming Supports AirPlay® (vpage 36) DLNA ver. 1.
Remote operation nnOperating range of the remote control Point the remote control at the remote sensor when operating it. nnInserting the batteries q Remove the remote control’s rear cover. w Set two R03/AAA batteries in the battery compartment in the indicated direction. Denon Remote App Denon Remote App is a unique application developed for the iPhone, iPod touch and Android smartphone. This application enables you to control DENON network devices that are connected to your home network.
Preparations Here, we explain the connections and basic operation methods for this unit.
NOTE • Do not plug in the power cord until all connections have been completed. • When making connections, also refer to the operating instructions of the other components. • Be sure to connect the left and right channels properly (left with left, right with right). • Do not bundle power cords together with connection cables. Doing so can result in humming or noise.
Connecting an analog device Connecting a digital device Digital device AUDIO AUDIO AUDIO OUT L R OPTICAL OUT R L R Operations L Preparations Analog device Information NOTE Other digital audio signals than 2 channel linear PCM cannot be input through DIGITAL IN connector of this unit.
Connecting to a home network (LAN) Wireless LAN nnEthernet cable (CAT-5 or greater recommended) Computer Internet Modem Wired LAN Cables used for connections Cable (sold separately) Ethernet cable Computer Modem zz This unit comes with a built-in Wi-Fi antenna. Internet To WAN side To LAN port To LAN port NOTE If there is any obstacle, communications may be disrupted. If this happens, place the relevant devices in a place where there is no obstacle.
Connecting the power cord Preparations When all of the connections are completed, insert the power plug into the power outlet.
Menu map Setting items Quick Setup [Setup] Quick Setup :enter Performs the network settings using a Wizard style window. For details on the operations, see the separate “Quick setup guide”.
• For details on “Quick Setup” operations, see the separate “Quick setup guide”. • If you cancelled “Quick Setup” menu or changed the network environment, perform “Setup” – “Quick Setup”. Setting the general [General] 1 NOTE Press SETUP. Turns on the Menu settings mode and the Menu appears on the display (vpage 9 “Menu map”). Use ui and ENTER to select 2 “General” – “Alarm”, then press ENTER or p. Alarm This device can playback using the alarm playback (everyday alarm, once alarm).
Setting the general [General] nnSetting the current time (Auto Adjust) You can automatically adjust the clock of this unit using the Internet. To use this function, the unit must be connected to the Internet. Setting the Time Zone 1 Press SETUP. Turns on the Menu settings mode and the Menu appears on the display. (vpage 9 “Menu map”) Use ui and ENTER to select 2 “General” – “Clock” – “Auto“Time Zone” menu appears. Turns on the Menu settings mode and the Menu appears on the display.
Setting the general [General] Auto-Standby Firmware An optimizing filter suited for the properties of the speakers (SC-N5) can be used. When this unit is in the stop state and there is no input signal and operation for 30 minutes, it automatically enters the standby mode. For the input source “ANALOG IN:1” and “ANALOG IN:2” only, when no operation is performed for eight hours, this unit automatically enters the standby mode. • The default setting is “On”.
Setting the general [General] Firmware can be updated using the “Web control function” (vpage 39). “Web control function” (vpage 39) settings must be completed in advance on a PC belonging to the same network. For information on obtaining update files, please contact our customer service center. 1 3 When the following screen is displayed, click the “OK” (e) button. Updating will begin.
Setting the general [General] 1 Press SETUP. Turns on the Menu settings mode and the Menu appears on the display (vpage 9 “Menu map”). “Notification” – “Upgrade”, then press ENTER or p. “Upgrade Notification” menu appears. Use ui to select “On”, then 3 press ENTER or p. Display upgrade message. Off Do not display upgrade message. 1 Press SETUP. Turns on the Menu settings mode and the Menu appears on the display (vpage 9 “Menu map”).
Setting the network [Network] Use this procedure to configure the wired LAN settings. nnNetwork connecting (when “DHCP”settings are “On”) When using this unit with the broadband router’s DHCP function enabled, this unit automatically performs the IP address setting and other settings. Connect the ETHERNET cable (vpage 7 “Connecting to a home network (LAN)” – “Wired LAN”). Press POWER X to turn 2 power to the main unit. 3 Press SETUP. on “DHCP (On)” menu appears. “Wait for the network to connect...
Setting the network [Network] Configure these settings to connect to the internet via a proxy server. 1 Press SETUP. Turns on the Menu settings mode and the Menu appears on the display (vpage 9 “Menu map”). ui and ENTER to select 2 Use “Network” – “Settings” – “Setup Proxy” menu appears. 3 If “Proxy(On)” appears, go to step 5. If “Proxy(Off)” appears, press ENTER or p. “Setup Proxy” menu appears. ui to select “Address” or “Name”, then press 7 Use ENTER or p.
Setting the network [Network] Use this procedure to configure the wireless LAN settings. nnAuto-Scan (Wireless LAN) If a LAN cable is connected, remove it. Use ui and ENTER to select 3 “Network” – “Settings” – “AutoScan”, then press ENTER or p. The access point you have set is displayed. 4 Use ui to select the access point, and then press ENTER or p. • If the access point is not detected automatically, configure it manually (vpage 18 “Manual Settings”).
Setting the network [Network] nnManual Settings 1 Press SETUP. 1 Press SETUP. Use ui and ENTER to select 2 “Network” – “Settings” – “WPS ui and ENTER to select 2 Use “Network” – “Settings” – Turns on the Menu settings mode and the Menu appears on the display (vpage 9 “Menu map”). Turns on the Menu settings mode and the Menu appears on the display (vpage 9 “Menu map”). “Manual”, then press ENTER or (Wi-Fi Protected Setup)” – “PIN code”, then press ENTER or p. p.
Setting the network [Network] nnNetwork Control Set the network function On/Off during standby. 1 Press SETUP. Turns on the Menu settings mode and the Menu appears on the display (vpage 9 “Menu map”). ENTER or p. “Network Control” menu appears. 3 Use ui to select “On”, then press ENTER or p. On Suspend network function during standby. It will take slightly longer till the network connection is completed. • The minimum amount of power is consumed when in standby (Power consumption: 0.3 W).
Operations Here, we explain functions and operations that let you make better use of this unit.
This section provides information on operations of playback procedures. Preparations Operations possible during playback Selecting the input source Adjusting the master volume Turning the power on nnSelecting the input source using the main unit Press POWER X. 1 Press SOURCE. 2 Press ui to select the input source. Use VOLUME df to adjust the volume. The volume level is displayed. The display changes to the input source selection screen.
Operations possible during playback Turning off the sound temporarily Switching the display’s brightness SDB TONE to select the 1 Press tone parameter to be adjusted. Press MUTE :. Press DIMMER. SDB Bass S. Direct 2 Treble Balance Use o p to adjust the “SDB”, “Bass”, “Treble” or “Balance”. Bass Emphasize the +10 dB bass sound. On – Off GSelectable modesH Treble Adjusts the treble sound. –10dB – +10dB GVariable rangeH Balance Adjusts the left/right volume balance.
Network audio playback nn About the internet radio function (vpage 49) nn About Music server (vpage 49) nn About Last.fm (vpage 50) nn About Spotify (vpage 50) Listening to internet radio q Check the network environment, then turn on this unit’s power (vpage 21 “Turning the power on”). w If settings are required, make the “Setting the network [Network]” (vpage 15). uip or 0 – 9, +10 to 2 Use input the characters, then press ENTER. • For character input, see page 41.
Network audio playback Here, we apply the settings to share music files stored on a PC and NAS on the network. nnSharing media stored in PC If you are using a media server, be sure to apply this setting first. When using Windows Media Player 12 (Windows 7) NOTE Perform this procedure after changing the control panel display to “Category”. PC’s “Control Panel”, select “Network 1 Inand theInternet” – “Choose homegroup and sharing options”. select “Choose media streaming options”.
Network audio playback Use this procedure to play music files or playlists. 1 Prepare for playback. Press MUSIC SERVER to switch 2 the input source to “Music Server”. ui to select the server including the file to be 3 Press played, then press ENTER or p. ui to select the search item or folder, then 4 Press press ENTER or p. 5 Repeat step 4 until the file is displayed. 6 Press ui to select the file, then press ENTER or p.
Network audio playback Last.fm radio is not available in all countries. Please check www.last.fm/hardware for more information. You’ll also need a subscription. Get one today at www.last.fm/subscribe. 1 q Make sure this unit is connected to the Internet, then turn on this unit’s power (vpage 21 “Turning the power on”). w If settings are required, make the “Setting the network [Network]” (vpage 15). Press ONLINE MUSIC to switch the input source to “Last.fm”. If you have a Last.
Network audio playback Preparations nnSwitching the display During playback, Press INFO. The file type/bit rate, artist name and album name are displayed. Operation buttons 1/3 9 1/3 ENTER SETUP Function Playback Auto search (cue) Stop Menu uio p Cursor operation / Auto search (cue, i) ENTER Enter Operations nnLast.
Network audio playback Introduce your DENON to a whole new world of music. With Spotify, you can enjoy instant access to millions of songs. A Spotify Premium subscription is required. For details, see the Spotify homepage. http://www.spotify.com 1 Prepare for playback. • For details on selecting the input source using the unit buttons, see “Selecting the input source using the main unit” (vpage 21). 3 If you have a Spotify account, then press ENTER.
Network audio playback Preparations nnSwitching the display During playback, Press INFO. The display switches between artist name and album title each time the button is pressed.
Favorite function • The Favorite function allows you to register your favorite broadcast stations and files in Favorite List in advance so that you can call and listen to the stations or files right away, whenever you want. • The contents that you can register and call are Internet radio station and music server. • You can register up to 50 items in Favorite List. 1 Press FAVORITE ADD while the Internet radio station or file to register is played back.
iPod playback Loading Dismantling iPod nn iPod (vpage 48) Connecting an iPod Connector nniPod Dock Preparations The unit can play back music stored on iPod, iPod touch, iPod classic, iPod nano and iPhone. Adapter Open the lid and mount the adapter suited for your iPod onto the dock adapter included with your iPod. Operations iPod Adapter nnUSB port iPod Information Dock connector NOTE • Please make sure to fit adaptor to connector part for use with your iPod.
iPod playback 5 1 iPod to switch the input 2 Press source to “iPod”. Press POWER X to turn on power to the main unit.
iPod playback Preparations Supported iPod models • iPod classic Operations • iPod nano • iPod touch Information • iPhone (as of July 2012) 33
USB memory device playback nn USB memory device (vpage 48) Playing files stored on USB memory devices 1 Connect the USB memory device to the USB port. • If the USB memory device is divided into multiple partitions, only the top partition can be selected. • This unit is compatible with MP3 files conforming to “MPEG-1 Audio Layer-3” standards. • DENON does not guarantee that all USB memory devices will operate or receive power.
USB memory device playback Operation buttons 8 9 (Press and release) 8 9 (Press and hold) 1/3 ui ENTER or p SEARCH REPEAT RANDOM Function Auto search (cue) Fast-reverse the file / Fast-forward the file Playback / Pause Cursor operation / Auto search (cue, ui) Enter / Playback Display the menu or return to the previous menu Character searchz1 Repeat playback Random playbackz2 1 Prepare for playback. Check the connection, then turn on this units. During playback, Press INFO.
AirPlay function Playing iTunes music on this unit Streaming music stored in iPhone or iPod touch directly to the unit 1 2 Turn this unit ON. If you update your “iPhone/iPod touch” to iOS 4.2.1 or later, you can stream music stored in your “iPhone/iPod touch” directly to this unit. Install iTunes 10, or later, on a Mac or PC that is connected to the same network as this unit. Set “Network Control” (vpage 19) to “On” for this unit. NOTE is displayed on the iPhone or iPod touch screen.
AirPlay function You can use your DENON remote control to play and pause iTunes, as well as skip to next and previous tracks. “Edit” – “Preferences” in iTunes, and click 1 Open “Devices”. “Allow iTunes audio control from remote 2 Check speakers”. General Playback Sharing Store Parental Devices Operations Devices • Source input will be switched to “AirPlay” when AirPlay playback is started. • You can stop AirPlay playback by pressing the o or choosing other input source.
Remote play function nn Roles each device plays The following devices are used for Remote Play. As specified in the DLNA standard, these devices are called DMC, DMS or DMR according to their role. Name Device example Role nn Files that can be played back See “Important (vpage 49). information” Outputs audio of music files played back through Remote Play from speakers. DMR cannot perform playback operations.
Web control function • This unit and the PC need to be connected to the network properly (vpage 7 “Connecting to a home network (LAN)”) in order to use the web control function. • Depending on the settings of your security-related software, you may not be able to access this unit from your PC. If this is the case, then change the settings of the security-related software. For example, if the IP address of this unit is “192.168.100.19”, enter “http://192.168.100.19/”. http://ceol-piccolo.local./index.
Web control function NETWORK FIRMWARE 7 Operate. GExample 1H Network Setting 1 NETWORK Friendly Name CEOL piccolo NETWORK t Set FIRMWARE y Set Default Network Connection Select Connection Select Connection [+]DHCO or Proxy Test Connection GExample 2H Network Setting 2 NETWORK Friendly Name CEOL piccolo u o Wi-Fi Manual DENON None Q0 Key1 ON OFF 192.168.000.001 255.255.255.000 000.000.000.000 000.000.000.000 000.000.000.000 Q1 ON OFF Address Name 000.000.000.
Other functions On this unit, the names displayed for “Friendly Name” and search, screens can be changed as desired. For inputting characters, there are two methods, as shown below. Method Using the number buttons Example: For changing characters from “POPS” to “ROCK” 1 the cursor at the character 2 Place to be changed with o p and q Place the cursor at “P”. POPS w Press seven times. “P” changes to “R”. ROPS Display the screen for inputting characters.
Other functions Auto power on function the screen for inputting 1 Display characters. o p to set the cursor to the 2 Use character you want to change. 3 Use ui to change the character. When you press INTERNET RADIO, ONLINE MUSIC, MUSIC SERVER, iPod, AUX, USB, 1/3 or FAVORITE CALL, the corresponding device is turned on and the source automatically switches. • When you press 1/3, the previously selected source is played back.
Information Here, we list various information related to this unit. Please refer to this information as needed.
Preparations Information Part names and functions For buttons not explained here, see the page indicated in parentheses ( ). Top panel Front panel When the door is opened. Operations PUSH OPEN w e Information q r q USB port················································· (31, 34) Used to connect iPod or USB memory devices. w Remote control sensor································· (3) e Display Displays play status, settings, etc.
Part names and functions Preparations Rear panel er t u t ETHERNET connector (NETWORK)·············· (7) y Speaker terminals (SPEAKERS)··················· (5) u SUBWOOFER connector······························· (5) Information q AC inlet (AC IN)·············································· (8) w DIGITAL IN connector··································· (6) e ANALOG IN connectors································ (6) r WPS button·················································· (17) y Operations q w
Part names and functions This section explains the buttons used to playback each input source. nnButtons that work with all input sources SLEEP CLOCK DIMMER POWER q w i o ONLINE MUSIC MUSIC SERVER iPod AUX USB CH - r CH + MUTE ADD FAVORITE CALL Q0 TOP MENU “Buttons that work with all input sources” can also be used.
Part names and functions Preparations nnButtons that work when the input source is “iPod” or “USB” “Buttons that work with all input sources” can also be used.
iPod USB memory device GCompatible formatsH Bit length Extension “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, or iPhone, may affect wireless performance.
Network audio nnAbout the internet radio function GPlayback file specificationsH This function lets you play music files and playlists (m3u, wpl) stored on a computer (music server) connected to this unit via a network. With this unit’s network audio playback function, connection to the server is possible using one of the technologies below.
Network audio Preparations nnAbout Last.fm Operations Last.fm learns what you love... and it’s a great way to discover new music. Your new DENON Network receiver is very clever. You can create a free Last.fm profile when you start using your DENON Network receiver and magically keep track of all the songs you hear. When you sign in at www.last.fm, you can see your top music charts, view thousands of reviews, biographies and artwork, and get recommendations for local performances you won’t want to miss.
D DLNA DLNA and DLNA CERTIFIED are trademarks and/ or service marks of Digital Living Network Alliance. Some contents may not be compatible with other DLNA CERTIFIED® products. I IEEE 802.11b This is one wireless LAN standard set by the 802 working group that establishes LAN technology standards at the IEEE (Institute of Electrical and Electronics Engineers) of the United States. It uses the 2.
Operations Information W WEP Key (Network Key) This is key information used for encrypting data when conducting data transfer. On this unit, the same WEP key is used for data encryption and decryption, so the same WEP key must be set on both devices in order for communications to be established between them. Wi-Fi® Wi-Fi Certification assures tested and proven interoperability by the Wi-Fi Alliance, a group certifying interoperability among wireless LAN devices.
GInternet radio/Music server/iPod/USB memory deviceH If a problem occurs first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the items listed in the table below. If the problem persists, there may be a malfunction. In this case, disconnect the power immediately and contact your retail outlet.
Symptom Cannot connect to favorite radio stations. Sound quality is poor or played sound is noisy. • Network’s signal transfer speed • This is not a malfunction. When is slow or communications lines playing broadcast data with a or radio station is congested. high bit rate, the sound may be broken, depending on the communications conditions. • File being played has a low bit • This is not a malfunction. rate.
GWireless LANH Symptom Countermeasure Page Symptom The AirPlay icon is not displayed in iTunes or on the iPhone/iPod touch. 18 – No sound. – Cause Countermeasure • This unit and the computer • Connect the computer or iPhone/ or iPhone/iPod touch are not iPod touch to the same network connected to the same network as this unit. (LAN). • iTunes or the iPhone/iPod touch • Update to the latest firmware. do not have firmware that supports AirPlay installed.
Preparations Specifications nn Audio AMP Rated output: Dynamic power: Output terminals: Input sensitivity/impedance: Total harmonic distortion (1 kHz, 5 W, 8 Ω): S/N ratio (10 W, 8 Ω, IHF-A): Tone control: Operations Frequency response: 2-channel driving 65 W + 65 W (4 Ω, 1 kHz, T.H.D. 0.7 %) 80 W + 80 W (4 Ω) Speaker 4 – 16 Ω Suited for headphones/stereo headphones AUX: 200 mV/22 kΩ AUX: 0.05 % AUX: 86 dB SDB : 100 Hz +8 dB BASS : 100 Hz ± 10 dB TREBLE : 10 kHz ± 10 dB 10 Hz – 40 kHz (+0.
Index vvB vvC vvD Display’s brightness············································ 22 DLNA··································································· 51 vvF Favorite list·························································· 30 Firmware Update················································ 12 FLAC······················································· 48, 49, 51 Friendly Name····················································· 19 Front panel·················································
License nn Boost http://www.boost.org/ Boost Software License - Version 1.0 - August 17th, 2003 The copyright notices in the Software and this entire statement, including the above license grant, this restriction and the following disclaimer, must be included in all copies of the Software, in whole or in part, and all derivative works of the Software, unless such copies or derivative works are solely in the form of machine-executable object code generated by a source language processor.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: • Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. • Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. • Neither the name of the Xiph.
Jean-loup Gailly jloup@gzip.org, Mark Adler madler@ alumni.caltech.edu nn cURL http://curl.haxx.se License Information for the Software Used in the Unit About GPL (GNU-General Public License), LGPL (GNU Lesser General Public License) License This product uses GPL/LGPL software and software made by other companies. After you purchase this product, you may procure, modify or distribute the source code of the GPL/LGPL software that is used in the product.
Dimensions Preparations 0.5 Operations 234.0 Unit : mm Information 90.0 4.0 86.0 180.0 20.0 140.0 Weight : 2.2 kg 20.0 38.0 152.0 44.
V01 www.denon.com D&M Holdings Inc.
