Owner`s manual
11
Adjusting the tone
1
Press SDB TONE to select the
tone parameter to be adjusted.
SDB BASS
BALANCES. DIRECT
TREBLE
2
Use o p to adjust the SDB,
BASS, TREBLE or BALANCE.
•To make other tone adjustments at this time, press SDB TONE.
•If no operation is performed for 5 seconds, the adjustment is
retained and the normal display reappears.
SDB
Emphasizes the bass sound when the Super Dynamic
Bass (SDB) function is set to ON.
GSelectable modesH
ON
–
OFF
BASS
Adjusts the bass sound.
GVariable rangeH
–10dB
–
+10dB
TREBLE
Adjusts the treble sound.
GVariable rangeH
–10dB
–
+10dB
BALANCE
Adjusts the left/right volume balance.
GVariable rangeH
L06
–
CENTER
–
R06
S.DIRECT
Plays back a disc using the SOURCE DIRECT mode.
During the SOURCE DIRECT mode, the audio signals
bypass the tone control circuits (SDB/BASS/TREBLE/
BALANCE), the music reproduction is more faithful to
the original sound.
GDefault settingsH
•SDB .......................................OFF
•BASS ..................................... 0dB
•TREBLE ................................. 0dB
•BALANCE .......................CENTER
•S.DIRECT ..............................OFF
Turning off the sound temporarily
Press MUTE :.
“MUTE ON” is displayed.
To cancel, press MUTE : again.
(The mute mode is also canceled when VOLUME df is pressed.)
Switching the display’s brightness
Press DIMMER.
100 % 70 %
40 %Off
•The display’s brightness switches each
time the button is pressed.
Operations possible during playback
Selecting the input source
Press CD, TUNER, iPod/USB,
DIGITAL IN
or ANALOG IN to select
the input source.
The desired input source can be selected
directly.
You can also use the following operation to select an input
source.
n Using the button on the main unit
Press SOURCE.
•Every time you press SOURCE, the input source switches in the
following order.
TUNERiPod/USBDISC
DIGITAL IN ANALOG IN
Adjusting the master volume
Use VOLUME df to adjust the
volume.
The volume level is displayed.
GAdjustable rangeH
VOLUME 00 – 49, VOLUME MAX
You can also adjust the volume this by turning VULUME on the main
unit.
Preparations
Informations
Operations
DISC