DCD-720AE / DCD-520AE COMPACT DISC PLAYER Owner’s Manual Downloaded from www.Manualslib.
n SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
n CAUTIONS ON INSTALLATION n NOTES ON USE WARNINGS • Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack. • Handle the power cord carefully. Hold the plug when unplugging the cord. • Keep the unit free from moisture, water, and dust. • Unplug the power cord when not using the unit for long periods of time. • Do not obstruct the ventilation holes. • Do not let foreign objects into the unit. • Do not let insecticides, benzene, and thinner come in contact with the unit.
Getting started Thank you for purchasing this DENON product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference.
Features AL32 Processing (DCD-720AE only) Equipped with AL32 Processing, DENON’s own analog waveform reproduction technology. The reproducibility of weak signals is enhanced by expanding 16 bit digital data to 32 bit. High precision 32 bit / 192 kHz D/A converter Equipped with high-precision 32 bit / 192 kHz-compatible D/A converter for analog signal conversion of the digital data (in the case of DCD-720AE, expanded with AL32 processing).
Preparations Preparations Here, we explain the connections and setup methods for this unit. F Connections vpage 4 F Setting the Auto Standby mode vpage 6 3 Downloaded from www.Manualslib.
Connections Connections for all compatible audio signal formats are described in this owner’s manual. Please select the type of connections corresponding to the equipment you are connecting. NOTE • Do not plug in the power cord until all connections have been completed. • When making connections, also refer to the owner’s manual of the other components. • Be sure to connect the left and right channels properly (left with left, right with right). • Do not bundle power cords together with connection cables.
Connecting an iPod or USB memory device to the iPod/USB port (DCD-720AE only) • You can enjoy music stored on an iPod or USB memory device. • For operating instructions see “Playback iPod®” (vpage 10) or “Playing a USB memory device” (vpage 11). Supported iPod models • iPod classic Cables used for connections To connect an iPod to this unit, use the USB cable supplied with the iPod.
Connecting the power cord After completing all the connections, insert the power plug into the power outlet. To household power outlet (AC 230 V, 50/60 Hz) Power cord NOTE • Do not plug in the power cord until all connections have been completed. • Insert the plugs securely. Loose connections will result in the generation of noise. • Do not unplug the power cord while the unit is operating.
Operations Operations Here, we explain functions and operations that let you make better use of this unit. F Playback vpage 8 7 Downloaded from www.Manualslib.
Playback Turning the power on Before using a remote control unit, insert the batteries (vpage 20 “Inserting the batteries”). Press POWER X to turn on power to the unit. • The power indicator lights green and the power turns on. • The “NO DISC” message is displayed if a disc is not loaded. When power is switched to standby nnPlaying a specific track Playing CD 1 Press SOURCE to set the playback 2 media mode to “DISC”. Press 5 on the unit to open the 3 disc tray and insert the disc. 4 Press 1/3.
Playback of MP3 and WMA files There are many music distribution sites on the Internet allowing you to download music files in MP3 or WMA (Windows Media® Audio) formats. The music (files) downloaded from such sites can be stored on CD-R or CD-RW discs and played on the unit. “Windows Media” and “Windows” are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries.
Playback iPod® With the unit, you can listen to music on an iPod and you can also operate the iPod with the main unit or the remote control unit. Display mode Display location “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. iPod is a trademark of Apple Inc.
Playing a USB memory device Playing files stored on USB memory device POWER X to turn on power 1 Press to the unit. Press SOURCE to set the playback 2 media mode to “USB”. Press MODE to select the folder 3 mode or disc mode. nn About the display • When “Folder mode” is selected “FLD” indicator lights. All the files in the selected folder are played. • When “Disc mode” is selected “FLD” indicator turns off. After the selected folder and files are played, all the files in all the folders are played.
Operations enabled during playback Stopping playback temporarily Press 1/3 during playback. The 3 indicator lights. Fast-forwarding and Fast-reversing (searching) Switching the display Press INFO. During playback, press 6 or 7. • To resume playback, press 1/3. Elapsed time of currently playing track Stopping playback Press 2 during playback. Playback stops. Remaining time for all remaining tracks Switching the pure direct mode In the stop mode, press PURE DIRECT.
Operations enabled during playback Playing repeatedly (Repeat playback) Press REPEAT. Playback in the respective repeat mode starts. • The repeat mode changes each time the button is pressed. Playing tracks in a specific order (Program playback) Switching the display’s brightness Press DIMMER. Up to 25 tracks can be programmed. the stop 1 InPROGRAM . mode, press Bright The “PGM” indicator lights.
Using the timer play function 1 Turn on the power of the connected components. the amplifier’s function to input from the 2 Switch connected unit. a disc or connect an iPod or USB memory 3 Load device. 4 Set the audio timer for the desired times. This unit Amplifier • Refer also to the owner’s manual of the audio timer. 5 Turn the timer “ON”. The power of the components connected to the timer turns off.
Information Information Here, we list various information related to this unit. Please refer to this information as needed. F Part names and functions vpage 16 F Other information vpage 21 F Troubleshooting vpage 25 F Specifications vpage 26 F Index vpage 27 15 Downloaded from www.Manualslib.
Part names and functions For buttons not explained here, see the page indicated in parentheses ( ).
Display Rear panel t y r q e w q q Information display Displays various information or playback elapsed time and so on of the disc. w Remote control signal reception indicator e Repeat mode indicators r RANDOM indicator t TOTAL indicator w q Analog audio connectors w Digital audio connectors Extension jack for future use.
Remote control unit For buttons not explained here, see the page indicated in parentheses ( ).
Remote control unit NETWORK operation q q POWER button (X) w INTERNET RADIO STATION buttons Q1 (1 – 3) e Reverse-skip/Forward-skip buttons (8, 9) r Fast-reverse/Fast-forward buttons (6, 7) w e Q2 e r t r y u Q3 Q4 Q5 i Q6 Q7 Q8 o Q0 Q9 W0 t Stop button (2) y PRESET buttons (+, –) u Information button (INFO) i SOURCE button o RANDOM button Q0 REPEAT button Q1 Remote mode select button (NET) Q2 1/3 button Q3 MODE button Q4 Cursor buttons (uio p) Q5 ENTER button Q6 MENU button Q7 Number butt
Remote control unit Inserting the batteries q Remove the rear lid in the direction of the arrow and remove it. NOTE w Load the two batteries properly as indicated by the marks in the battery compartment. R03/AAA e Put the rear cover back on. • Insert the specified batteries in the remote control unit. • Replace the batteries with new ones if the set does not operate even when the remote control unit is operated close to the unit. (The supplied batteries are only for verifying operation.
Other information Playable media Discs Playable media CD CD-Rz CD-RWz NOTE • Some discs and some recording formats may not be playable. • Non-finalized discs cannot be played. Files USB memory device CD-R and CD-RW discs created in the format described below can be played. nnUSB-Compatible file systems nnWriting software format ISO9660 level 1 • When written in other formats, it may not be possible to play the disc properly.
Playable media MP3 or WMA playback order of MP3 or WMA files When there are multiple folders containing MP3 or WMA files, the playback order of folders is automatically set when this unit reads the media. The files in each folder are played back in the order in which the files were recorded on the media, from the oldest date and time. About Discs and Files Files, such as MP3/WMA etc., recorded on CD-R/-RW and USB memory device are divided into large segments (folders) and small segments (files).
Cautions on using media Inserting a disc How to handle media Cleaning discs • Set the disc in the tray label side up. • Make sure the disc tray is fully open when inserting the disc. • Place the disc horizontally in the tray, aligned with the tray guide. • Do not get fingerprints, oil or dirt on discs. • Take special care not to scratch discs when removing them from their cases. • Do not bend or heat discs. • Do not enlarge the hole in the center.
Explanation of terms A AL32 Processing AL32 Processing for All Channels. DENON has further developed its proprietary AL32 Processing, an analog waveform reproduction technology. AL32 Processing, thoroughly suppresses quantization noise associated with D/A conversion of LPCM signals to reproduce the lowlevel signals with optimum clarity that will bring out all the delicate nuances of the music. B Bit rate This is the amount of or audio data recorded on a disc that is read in one second.
Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase. Programmed playback is not possible.
GUSB memory deviceH Symptom Cause Countermeasure Specifications Page When a USB memory device is connected, “NO DEVICE” is displayed. • The unit cannot recognize a USB • Check the connection. memory device. • A USB memory device not • Connect a USB memory device conforming to mass storage conforming to mass storage class or MTP standards is class or MTP standards. connected. • A USB memory device that • This is not a malfunction.
Index vvA Accessories··························································· 1 AL32 Processing················································· 24 All-track repeat················································ 9, 13 vvB Batteries······························································ 20 Bit rate··························································· 21, 24 Brightness··························································· 13 vvC Cable Audio cable········································
Dimensions 60.0 45.0 344.0 19.0 88.0 434.0 107.0 2.0 50.0 166.0 273.0 265.0 49.0 6.0 Unit : mm 45.0 Weight : DCD-720AE: 4.1 kg DCD-520AE: 4.0 kg 28 Downloaded from www.Manualslib.
V01 Downloaded from www.Manualslib.com manuals search engine www.denon.com D&M Holdings Inc.
