AV SURROUND AMPLIFIER AVC-A1HD AV SURROUND PRE-AMPLIFIER AVP-A1HD Owner’s Manual GUpgrade versionH The owner’s manual is organized in the following two volumes. • GOriginal versionH • GUpgrade versionH································This version NOTE • Products that have been upgraded cannot be returned to the previous state. • This model has been upgraded previously. This manual contains details of all of the upgrades.
Amp Assign / Multi-Zone Connections and Operations ( AVC-A1HD only)································································· 46 ~ 61 Troubleshooting······································································70, 71 Specifications Specifications················································································72 Troubleshooting Other Information································································ 62 ~ 69 Information Other Operations and Functions············
Getting Started w Troubleshooting DTS Neo:X This technology enables the playback of 2-channel source audio or 7.1/5.1 multi-channel source audio through a maximum 9.1 channel speakers, achieving an even broader sound field. Information Audyssey DSX™ By connecting front height speakers to this unit and playing back through Audyssey DSX™, you can experience a more powerful playback expression in the height audio range.
Support for front height speakers and front wide speakers Front height or front wide channels can be played back through the FH/FW/AMP ASSIGN-2 speaker terminals and the PRE OUT FH/FW terminals. This enables you to enjoy a maximum 9.3 channel surround playback. Surround B speakers unsupported As front height speakers and front wide speakers are now supported by this upgrade, surround B speakers can no longer be used. Mic Select function The Mic Select function is deleted when the product is upgraded.
After completing the upgrade, labels are attached to the changed parts of the panel. For details of the changed parts, see the illustration below.
Display Front Panel When the upgrade is performed, the sections highlighted in the illustration below do not light. Q8 Q7 Q6 Q5 Q4 Q3 Q2 Q1 Q0 o i u y Setup GWith the door openH Connections When this unit is upgraded, the night mode cannot be set when the NIGHT button is pressed. Getting Started Part Names and Functions w e These light according to the settings of the surround A and B speakers. q Q1 NIGHT indicator This lights when the night mode is selected.
Getting Started Remote Control Unit Connections When this unit is upgraded, the night mode cannot be set when the NGT button is pressed. Connections Speaker Installation n Main remote control unit (RC-1067) q HDMI video direct button (NGT) Speaker Layout The table below shows a typical speaker configuration for the unit. When the video direct function is on, temporary display in the GUI menu cannot be used. Speaker q Configuration L R 9.
AVC-A1HD Front speaker (R) Subwoofer 1 Center speaker b L : Left R : Right (R) w w q Front speaker (L) Subwoofer 2 Subwoofer with built-in amplifier Setup • When using just one surround back speaker, connect it to the left channel (SBL). • When using Subwoofer 2 or 3, set GUI menu “Manual Setup” – “Speaker Setup” – “Subwoofer Setup” (vpage 24). Subwoofer 3 (L) q */ */ w */ Connections When this unit is upgraded, the terminal names and connection methods change.
n Connecting the RCA pre-out terminal (Example : 9.3-channels) Subwoofer 1 Subwoofer 2 Subwoofer 1 Subwoofer with built-in amplifier Subwoofer 3 IN IN IN Connections b L : Left R : Right Subwoofer 2 Subwoofer 3 Getting Started n Connecting the XLR pre-out terminal (Example : 9.
Connections to Other Devices Getting Started Connecting Equipment with HDMI connectors External Power Amplifier When this unit is upgraded, 3D video can be played back. When this unit is upgraded, the terminal names and connection methods will change.
GUI Menu Operations (vpage 44) (vpage 35 ~ 37) n Network Setup (vmpage 33 ~ 36) n Zone Setup (vmpage 37) n Option Setup (vpage 28, 30 ~ 34) • Amp Assign • Volume Control • Source Delete • GUI · Screensaver · Wall Paper · Format · Text · Master Volume · NET/USB · iPod • Quick Select Name • Trigger Out 1 • Trigger Out 2 • Trigger Out 3 • Trigger Out 4 • Transducer Setup • Digital Out • Remote ID • 2Way Remote • 232C Port (1) • Dimmer • Setup Lock • Maintenance Mode • Firmware Update • Add New Feature n Lang
Information (vpage 44) (vpage 23 ~ 34, mpage 31, 34 ~ 38, 43) n Speaker Setup (vpage 23 ~ 25) • Speaker Configuration · Front · Center · Subwoofer · Surround A · Surround B · Surround · Surround Back · Front Height · Front Wide • Subwoofer Setup • Distance • Channel Level · Mode · Surround · Start · Default • Crossover Frequency • THX Audio Setup • Surround Speaker n HDMI Setup (vmpage 31) n Audio Setup (vpage 26, 27) • EXT.
• Measurements are performed by placing the setup microphone successively at multiple positions throughout the entire listening area, as shown in GExample qH. For best results, we recommend you measure in six or more positions, as shown in the illustration (up to eight positions). • Even if the listening environment is small as shown in GExample wH, measuring at multiple points throughout the listening environment results in more effective correction.
1 Set up the subwoofer If using a subwoofer capable of the following adjustments, set up the subwoofer as shown below. Set the direct mode to “On” and disable the volume adjustment and crossover frequency setting. n When using a subwoofer without a direct mode Mount the setup microphone on a tripod or stand and place it in the main listening position. When placing the setup microphone, adjust the height of the sound receptor to the level of the listener’s ear.
Optimize settings for speakers in use. F Menu tree F • Configure the following settings as required. • To start Auto Setup without configuring the following settings, perform step 4 only, and then proceed to step 2. The settings are performed automatically.
1 RETURN Configuring Various Settings Use ui to select the item you want to set, and then press ENTER. The menu screen of the selected setting is displayed. AVC-A1HD H AUTO SETUP Auto Setup Start Enter Start Auto Setup GSetup screen RETURN AVP-A1HD Cancel H Pre-out Assign Auto Setup Start ENTER uio p RETURN RETURN Cancel b For details of the items that can be set, see page 28 ~ 30. 2 3 Press uio p to set. Press RETURN to return to the previous screen.
i ENTER 3 The detected speakers are displayed. b The illustration below shows an example of when the front speakers, center speaker, subwoofer, surround speakers, surround back speakers and front height speakers have been detected. AUTO SETUP 1 2 3 4 5 6 STEP2 Speaker Detection Check Measuring the subwoofer volume level Select “Measure” and then press ENTER. Measure the subwoofer volume level.
3 Adjust the subwoofer volume level of your subwoofer so that the level display is within the range of 72 to 78 dB. AUTO SETUP 1 2 3 4 5 6 SW Level Matching Please adjust the level of your active subwoofer unit so that the level indicates approx. 75dB Stop When 2 or 3 subwoofers are used, adjust the volume level of each subwoofer so that their volume level will set between 72~78 dB. 99.8dB Setup Enter Select “SW Level Matching” and then press ENTER.
ENTER ui The measurement of the second position starts. AUTO SETUP 1 2 3 4 5 6 i 20% b To re-measure, press i to select “Retry”, and press ENTER. Remeasure the previous point. AUTO SETUP 1 2 3 4 5 6 STEP3 Measurement (Finish) Measurements finished. Proceed to STEP 4 (Calculation) 18 Enter RETURN Cancel b It takes a few minutes for analysis to complete. The time required for this analysis depends on the number of speakers connected.
ENTER RETURN STEP6 Store In STEP 5, the results of the analysis from STEP 4 are confirmed. In STEP 6, the measured results from STEP 2 and STEP 3 are saved. 1 Use ui to select the item you want to check, and then press ENTER. Select “Store” and then press ENTER. Save the measurement results. 1 2 3 4 5 6 STEP6 Store Press "Store" to store calculation results. 1 2 3 4 5 6 Ch.
ENTER ui Auto Setup is complete. Unplug the setup microphone from the unit’s SETUP MIC jack. Set Audyssey Dynamic Volume®. AUTO SETUP 1 2 3 4 5 6 Turn on Dynamic Volume ? Exit Turn Dynamic Volume off and exit Auto Setup u ENTER i NOTE • After performing Auto Setup, do not change the speaker connections or subwoofer volume. In event of a change, perform Auto Setup again. • After performing Auto Setup with two or three subwoofers, do not change the channel distances and levels of any of the subwoofers.
NOTE Examples 1 2 3 4 5 6 Caution! • Correct measurement is not possible due to inappropriate subwoofer volume. • When using a subwoofer with built-in amplifier (active type), use “SW Level Matching” to adjust the subwoofer volume (vpage 17 “Adjusting the subwoofer volume level”). • When using a subwoofer without a built-in amplifier, select “Skip”, and then press ENTER. • The connected setup microphone is broken, or a device other than the supplied setup microphone is connected.
d Parameter Check Make direct mode settings. Check Auto Setup measurement results. This is displayed after the Auto Setup procedure is completed. Direct Mode [Selectable items] ON OFF [Selectable items] Spkr Config Check Crossover Check Distance Check Ch.
Manual Setup F Menu tree F Manual Setup a Speaker Configuration Large : Use a large speaker that can adequately play back low frequencies. Select front speaker size. [Selectable items] Large Small : Use a small speaker that has inadequate playback capacity for low frequencies. Small Center Select center speaker use and size. [Selectable items] Large Small None Subwoofer Select subwoofer use. [Selectable items] Yes No Surround Select surround speakers use and size.
Select subwoofer output configuration and bass signal for playback. Mode Distance measurement Select bass signal for playing with the subwoofer. Select the speaker you want to set, then set the distance. Set the value closest to the measured distance. [Selectable items] LFE–THX– LFE+Main 0.00m ~ 18.00m : Display when “Meters” is set. Select number of subwoofers and configuration.
Resets the settings to the default values. Operating from the main remote control unit Set the speaker to play the optimal THX surround mode. THX Ultra2 Subwoofer [Selectable items] Set when using a subwoofer compatible with THX Ultra2 standards or a subwoofer that can be properly played at low range. FIXED–THX– : Setup when using a THX-certified speaker.
Make settings for audio playback. Input Att. AVC-A1HD Setup playback method for analog signals inputted from external input connectors (EXT. IN). Setup when input level is too large and playback volume is distorted. [Selectable items] OFF –6dB Subwoofer Level This can be set when “Mode” is set to “DSP”. Set the subwoofer level for playback. Select according to the player in use. [Selectable items] 0dB +5dB +10dB +15dB Make speaker settings for 2-channel mode playback.
Select crossover frequency from which subwoofer handles low range signal. [Selectable items] 40Hz 60Hz 150Hz 200Hz 250Hz Adjust tonal quality for each speaker using graphic equalizer. Adjust CH 80Hz 90Hz 100Hz 110Hz 120Hz Select speaker adjustment method. [Selectable items] Each L/R All Select the speaker and frequency band and adjust the level. Set distance from listening position to front left speaker.
a Amp Assign Getting Started When this unit is upgraded, the “Option Setup” contents are changed. When configuring the “Option Setup” settings, refer to this version of the Owner's Manual instead of the “Original version”. AVC-A1HD Change the assignment for the power amps. Assign Mode AVC-A1HD Option Setup Make various other settings.
Extension Channel AVP-A1HD Set the channel to add to the speaker system. Change the pre-out assignment. [Selectable items] Assign Mode [Selectable items] Normal Free Assign Normal : Add front wide channel to the speaker system.
AVP-A1HD [Selectable channels] Front Height R Surround Back R Front Height L Front Wide L Front Wide R Subwoofer 1 Subwoofer 3 [Selectable items] XLR (INV) q GROUND w HOT e COLD q GROUND w COLD e HOT Set when connecting the receiver to a POA-A1HD through a CONTROL LINK. OFF ON (Single) ON (Dual) Volume Limit Make a setting for maximum volume. [Selectable items] OFF –20dB –10dB 0dB POA 1/POA 2 Power On Level Set POA-A1HD for which the MODE select switch is set to “1” or “2”.
Format AVC-A1HD Select the video output signal format to match the monitor. AVP-A1HD [Selectable items] Make GUI related settings. NTSC When a format other than the video format of the connected monitor is set, the picture will not be displayed properly. Use the procedure described below to change the video format. Operating from the main unit OFF b The GUI menu is not displayed when performing this setting. q Press and hold the AUDIO DELAY and RETURN buttons for at least 3 seconds.
AVC-A1HD AVP-A1HD j Trigger Out 2 l Trigger Out 2 AVP-A1HD AVC-A1HD This sets the conditions to turn on the trigger out 4, in the same way as “Trigger Out 1” above. ON When the input source set to on is selected, the trigger out turns on. Associated with respect to the input source for zones set to “ON” at “Setting with Respect to the Zone”. Setting with Respect to the Surround Mode When the surround mode set to on is selected, the trigger out turns on.
A3 232C Port (1) A5 232C Port (1) AVC-A1HD AVP-A1HD Set usage of OPT4 OUT. NOTE The ZONE4 operations cannot be performed when set to “Rec Select”. AVP-A1HD Set when external controller or 2-way remote control unit (RC7000CI and RC-7001RCI, sold separately) is connected. 2Way Remote : Set when using a 2-way remote control unit. Set remote control ID. Match the ID setting of the remote control unit and the receiver.
AVC-A1HD AVP-A1HD Update the firmware of the receiver. You can check for firmware updates. You can also check approximately how long it will take to complete an update. Display Description Updating failed. Failure to log into server. Server is busy. Wait a while then try again. Failure connecting to server. Upgrade Upgrade Status A list of the additional functions provided by the Upgrade will be displayed.
Surround Mode Surround Playback of 2-channel Sources [Selectable items] PLgx CINEMA PLg CINEMA Pro Logic Playing Multi-channel Sources (Dolby Digital, DTS, etc.) [Selectable items] This mode is for decoding the input signals according to their format and playing THX surround sound. The display when the HOME THX CINEMA mode is selected depends on the input signal and surround back output playback mode. z： This is displayed when the input signal is “DTS-ES Discrete 6.1”.
DOLBY PLgx or DOLBY PLg This is the standard mode for enjoying surround sound according to the program source. : This mode is suited for movie sources. Music : This mode is suited for music sources. Game : This mode is suited for games. Pro Logic :This mode can be selected when a DOLBY Pro Logic decoder is used to play 2- channel source in 4.1-channel surround sound (Left/Center/Right/Surround Mono). This can be selected when playing with a DOLBY PLg decoder.
[Selectable items] This mode is for decoding the input signals according to their format and playing surround sound. The display when the STANDARD mode is selected depends on the input signal and surround back output playback mode. Display For details, see page 66 ~ 68. NOTE Information • DTS NEO:X mode cannot be selected when the sampling frequency of the input signal is 32 kHz, 64 kHz and 128 kHz. • Audyssey DSX™ mode can be selected even when the STANDARD button is pressed.
Parameters n In the THX mode (for 2-channel sources) Mode [Selectable items] PLIIx CINEMA PLII CINEMA Select the mode according to the playback source. n In the PLgx or PLg mode Cinema [Selectable items] Music Game Pro Logic z z: Can be selected in the PLg mode. Cinema [Selectable items] Music Game PLII MUSIC OFF Cinema EQ Soften the treble range of movie soundtracks for better understanding. Adjust various audio parameters.
AFDM Adjust the low-frequency effects level (LFE). Assign center channel signal to front left and right channels for wider sound. Auto-select surround mode by source. This function only works for software containing a special identification signal. If the software being played is recorded in Dolby Digital EX, it is played in 6.1-channels. If not, it is played in 5.1-channels.
Control the front height channel volume. [Selectable items] Low Middle Adjust the tonal quality of the sound. High [Selectable items] 8CH 2CH Subwoofer Att. [Selectable items] ON ON OFF Adjust each surround back channel tone. NOTE Adjust each front height channel tone. Adjust bass for all channels together. [Selectable items] [Variable range] –6dB ~ +6dB [Variable range] Treble Front Wide Adjust treble for all channels together. Adjust each front wide channel tone.
MultEQ® XT 32 Audyssey : Optimize the speakers. frequency response of all except front L and R speakers. : Optimize frequency response of all speakers to flat response. Manual : Apply frequency response set with “Manual EQ” (vpage 27). OFF : Turn “MultEQ® XT 32” equalizer off. Press the ROOM EQ button on the main unit or the EQ button on the main remote control. OFF OFF Audyssey Audyssey Audyssey Byp. Byp. L/R L/R Audyssey Audyssey Audyssey Flat Flat • When “Audyssey”, “Audyssey Byp.
Setting Solve the problem of large variations in volume level betweenTV, movies and other content (between quiet passages and loud passages, etc.) by automatically adjusting to the user’s preferred volume setting. Set Dynamic Volume® effect. OFF Dynamic EQ / Volume : ON Dynamic EQ : ON / Volume : OFF Dynamic EQ / Volume : OFF Provides more immersive surround sound by adding the new channels. Day : Medium adjustment to loudest and softest sound. : Least adjustment to loudest and softest sounds.
Adjust sound stage height when using front height speakers. [Variable range] –10 ~ 0 ~ +10 [Selectable items] [Variable range] OFF Mode1 (RESTORER 64) 0ms ~ 200ms Operating from the main unit or the main remote control unit Mode2 (RESTORER 96) b The GUI menu is not displayed when carrying out this setting. Mode3 (RESTORER HQ) The default setting for “NET/USB” and “iPod” is “Mode3”. All others are set to “OFF”.
Getting Started Quick Select Shows information about “Quick Select” settings. Information F Menu tree F Quick Select Quick Select 1 Quick Select 2 Quick Select 3 Input Mode Status Dynamic Volume® Shows information about current settings. Volume Level MultEQ® XT 32 Auto Surround Mode setting Name Status Information a MAIN ZONE s ZONE2/3/4 Troubleshooting a MAIN ZONE Shows information about settings for MAIN ZONE. The items displayed differ according to the input source.
When playing a Blu-ray Disc, you can enjoy jitter-free playback of the HD audio. Connect this unit to a DENON LINK 4th compatible Blu-ray Disc player using a DENON LINK cable and HDMI cable. b For connection instructions, refer to the respective equipment’s operating instructions.
AVC-A1HD With “Setting 2” to “Setting 6”, “Setting 8” to “Setting 10”, “Setting 12” and “Setting 13”, it is possible to switch the Amp Assign mode between the 9.1/7.1-channel mode and the multi-zone mode without changing the speaker connections.
Speaker connections F 9.
n Speakers to connect to the speaker terminals With this setting it is possible to switch between the following two playback modes. F 9.1-channel playback F Multi-zone playback • 7.1-channel playback + ZONE2 stereo playback Speaker to connect ZONE2 MAIN ZONE FHL FHL C SBL SR Press ZONE2 ON/OFF button.
n Speakers to connect to the speaker terminals With this setting it is possible to switch between the following two playback modes. F 9.1-channel playback F Multi-zone playback • 7.1-channel playback + ZONE3 stereo playback Speaker to connect ZONE3 MAIN ZONE FHL FHL C FR SBL SR FL SW SL R L SBR SBL R L R L Z3R Z3L + FR FL C SR SL SBR SBL Z3R ZONE3 ON Speaker to connect FHR/FWR FHL/FWL FHR FHL FWR FWL Speaker Press ZONE3 ON/OFF button.
n Speakers to connect to the speaker terminals With this setting it is possible to switch between the following two playback modes. F 9.1-channel playback F Multi-zone playback • 7.1-channel playback + ZONE2 monaural playback + ZONE3 monaural playback FRONT Speaker terminal Speaker to connect MAIN ZONE FL SW FHL C SR ZONE3 ON/OFF button. FL SW SL ZONE2 FHR C Pre out terminal SR z1 Z3 + SBR FWL MAIN ZONE FWR Press ZONE2 ON/OFF or FR SR z2 ZONE3 ON/OFF button.
n Speakers to connect to the speaker terminals Speaker to connect Amp Assign mode : ZONE2/ZONE3 FL SW ZONE3 ON/OFF FR C ZONE2 z1 ZONE3 Z3L Z3R ZONE2 OFF / ZONE3 ON Z3L Z3R ZONE2 ON / ZONE3 ON FR button. SL C FH/FW/ AMP ASSIGN-2 AMP ASSIGN R L R L R L R L SR SL SBR SBL Z3R Z3L Z2R Z2L Z2L Z2R SR Pre out terminal FR FL C SR SL SBR SBL Speaker to connect FHR/FWR FHL/FWL FHR FHL FWR FWL Other Operations C L FL SURR.
n Speakers to connect to the speaker terminals R Speaker to connect Amp Assign mode : ZONE2/3 (MONO) FHL C FL SW ZONE3 ON/OFF FR C button.
n Speakers to connect to the speaker terminals F Making bi-wiring connections for the FL and FR channels in the MAIN ZONE and conducting 9.
n Speakers to connect to the speaker terminals With this setting it is possible to switch between the following two playback modes. F 9.1-channel playback F Multi-zone playback • Bi-wiring connection 7.1 channel playback + ZONE2 stereo playback Speaker terminal FRONT Speaker to connect MAIN ZONE FHL FHL FR C SR R SL L SBR SBL R L FR FL Bi-Wiring SR Press ZONE2 ON/OFF button.
n Speakers to connect to the speaker terminals With this setting it is possible to switch between the following two playback modes. F 9.1-channel playback F Multi-zone playback • Bi-wiring connection 7.1 channel playback + ZONE3 stereo playback Speaker terminal FRONT Speaker to connect MAIN ZONE FHL FHL FR C SR R SL L SBR SBL R L FR FL Bi-Wiring SR Press ZONE3 ON/OFF button.
n Speakers to connect to the speaker terminals Speaker terminal R Speaker to connect Amp Assign mode : Bi & ZONE (MONO) FHL FHL C z1 SL Press ZONE2 ON/OFF or FR SR ZONE3 ON/OFF button. FL SW SL ZONE2 FHR C Pre out terminal SR z1 Z3 + FWL MAIN ZONE FWR Press ZONE2 ON/OFF or FR SR z2 ZONE3 ON/OFF button.
n Speakers to connect to the speaker terminals F Making bi-amp connections for the FL and FR channels in the MAIN ZONE and conducting 9.
With this setting it is possible to switch between the following two playback modes. F 9.1-channel playback F Switching between bi-wiring playback using speakers exclusively n Speakers to connect to the speaker terminals for 2- Speaker terminal channel playback Speaker to connect Amp Assign mode : 2CH Bi-Wiring FL SW SL C FR SR z1 SBL FR Press DIRECT/ STEREO button.
With this setting it is possible to switch between the following two playback modes. F 9.1-channel playback F Switching between bi-amp playback using speakers exclusively n Speakers to connect to the speaker terminals for 2- Speaker terminal channel playback Speaker to connect Amp Assign mode : 2ch Bi-Amp FL SW SL C FR SR z1 SBL FR Press DIRECT/ STEREO button.
Setting 15: F 9.1 channel playback when front height speakers are connected to the speaker terminals of this unit F 9.1 channel playback when front wide speakers are connected to the speaker terminals of this unit Amp Assign mode : Front Wide MAIN ZONE MAIN ZONE FHR FWL FL SW C C FR SL SR SBL Other Operations SBR SBR Speaker connections n Speakers to connect to the speaker terminals n Speakers to connect to the speaker terminals L FR FL C SURR.
F Free Getting Started Setting 16: assign n Amp Assign mode setting and speakers connected to the various speaker terminals Amp Assign mode R SURR. CENTER L R SURR.
Getting Started Other Information FHL Front wide speaker z2 60 ~ 90 cm 45˚ SL Surround back speaker • Point slightly downwards SR SBL z1 22° ~ 30° z4 90° ~ 110° z1 : Recommended for Dolby Pro Logic gz z2 : Recommended for Audussey DSX™ SBR z2 22° ~ 45° z5 135° ~ 150° z3 55° ~ 60° GSpeaker abbreviationsH : Front speaker (L) SBL : Surround back speaker (L) : Front speaker (R) SBR : Surround back speaker (R) : Center speaker FHL : Front height speaker (L) : Subwoofer FHR : Front height spea
This unit is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater. Dolby Pro Logic gz Audyssey Dynamic EQ® Dynamic Volume® solves the problem of large variations in volume level between television programs, commercials, and between the soft and loud passages of movies.
Getting Started Surround Modes and Parameters Signals and adjustability in the different modes Surround mode Channel output Parameters (default values are shown in parentheses) Front height L/R Front wide L/R D D D D D D D D D D D D D D D D D D D D D D D D D D D D D HOME THX CINEMA (5.
Surround Mode Effect Level Subwoofer PRO LOGIC II/IIx MUSIC mode only Panorama Dimension Center Width Height Gain DTS NEO:X Center Gain EXT. IN mode only Subwoofer Att.
Button Input signals PCM Surround mode ANALOG PCM (multi ch) PCM (2ch) DTS DTS-HD DTS ES MTRX DTS-HD DTS ES DSCRT High Resolution (With Flag) Master Audio (With Flag) Audio z8 DOLBY DIGITAL DOLBY DTS (5.1ch) DTS 96/24 DOLBY TrueHD DOLBY DIGITAL Plus DOLBY DIGITAL DOLBY DIGITAL EX EX (With Flag) (With no Flag) Super Audio CD DOLBY DOLBY DIGITAL DSD DIGITAL (2ch) (multi ch) (5.
Input signals PCM Surround mode Note ANALOG PCM (multi ch) DTS-HD PCM (2ch) DTS DTS-HD DTS-HD DTS ES DSCRT DTS ES MTRX High Resolution Master Audio (With Flag) (With Flag) Audio DOLBY DIGITAL DOLBY DTS (5.
Input signals PCM Surround mode Note ANALOG PCM (multi ch) DTS-HD PCM (2ch) DTS DTS-HD DTS-HD DTS ES DSCRT DTS ES MTRX High Resolution Master Audio (With Flag) (With Flag) Audio DOLBY DIGITAL DOLBY DTS (5.1ch) DTS 96/24 DOLBY TrueHD DOLBY DIGITAL Plus DOLBY DIGITAL EX (With Flag) Super Audio CD DOLBY DOLBY DOLBY DSD DIGITAL EX DIGITAL DIGITAL (2ch) (multi ch) (With no Flag) (5.
Multi-Zone Power On/Off Status Setting STEREO or DIRECT (2ch) Mode Setting SURR. SURR.
Troubleshooting Symptom • You are playing a monaural • The mode is set to source (TV, AM radio something other than broadcast, etc.) in the “STANDARD” (Dolby/DTS “STANDARD” (Dolby/DTS Surround) or “HOME THX Surround) or “HOME THX CINEMA” . CINEMA” mode. • The surround mode is set • Set to a surround playback to “STEREO”. mode. • Set to something other than “None”. • Select a surround playback mode. • Sound is not output from the surround back speakers. Change the settings.
Cause DTS sound is not output. • DVD player’s audio output setting is not set to bitstream. Page – – – m45 m47 m61 m63 • The “Manual Setup” • Set to “Amp”. – “HDMI Setup” – “Audio” setting is set to “TV”. m31 m31 • The “Manual Setup” • Set to “TV”. – “HDMI Setup” – “Audio” setting is set to “Amp”. m31 m31 • DVD player is not compatible with DTS sound playback. • The unit’s “Decode Mode” • Set to the “Auto” or “DTS” setting is set to “PCM”. mode.
Getting Started Specifications AVP-A1HD No specifications are changed by this upgrade. Setup When this unit is upgraded, the “Audio section” contents are changed. To check items related to “Audio section”, refer to this version of the Owner's Manual instead of the “Original version”. Other Operations n Audio section • Power amplifier Rated output: Information Troubleshooting Output connectors: Front: 150 W + 150 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.
www.denon.com D&M Holdings Inc.
